Download or read book Robotics Research Trends written by Xing P. Guô and published by Nova Publishers. This book was released on 2008 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics began as a science fiction creation which has become quite real, first in assembly line operations such as automobile manufacturing, aeroplane construction etc. They have now reached such areas as the internet, ever-multiplying-medical uses and sophisticated military applications. Control of today's robots is often remote which requires even more advanced computer vision capabilities as well as sensors and interface techniques. Learning has become crucial for modern robotic systems as well. This new book presents the latest research in the field.
Download or read book Novel Design and Applications of Robotics Technologies written by Zhang, Dan and published by IGI Global. This book was released on 2018-09-14 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through expanded intelligence, the use of robotics has fundamentally transformed a variety of fields, including manufacturing, aerospace, medical, social services, and agriculture. Providing successful techniques in robotic design allows for increased autonomous mobility, which leads to a greater productivity level. Novel Design and Applications of Robotics Technologies provides innovative insights into the state-of-the-art technologies in the design and development of robotic technologies and their real-world applications. The content within this publication represents the work of interactive learning, microrobot swarms, and service robots. It is a vital reference source for computer engineers, robotic developers, IT professionals, academicians, and researchers seeking coverage on topics centered on the application of robotics to perform tasks in various disciplines.
Download or read book Wearable Robotics written by Jacob Rosen and published by Academic Press. This book was released on 2019-11-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wearable Robotics: Systems and Applications provides a comprehensive overview of the entire field of wearable robotics, including active orthotics (exoskeleton) and active prosthetics for the upper and lower limb and full body. In its two major sections, wearable robotics systems are described from both engineering perspectives and their application in medicine and industry. Systems and applications at various levels of the development cycle are presented, including those that are still under active research and development, systems that are under preliminary or full clinical trials, and those in commercialized products. This book is a great resource for anyone working in this field, including researchers, industry professionals and those who want to use it as a teaching mechanism. - Provides a comprehensive overview of the entire field, with both engineering and medical perspectives - Helps readers quickly and efficiently design and develop wearable robotics for healthcare applications
Download or read book Recent Trends In Mobile Robots written by Yuan F Zheng and published by World Scientific. This book was released on 1994-01-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent trends in the field as perceived by a global selection of researchers and experts. Subjects covered include motion planning of mobile robots in unknown environments, coordination between mobility and manipulability, computation environments for mobile robots, nonlinear control of mobile robots and environmental modeling using advanced sensing technologies. Issues ranging from progress in applications to fundamental problems are discussed.
Download or read book Annals of Scientific Society for Assembly Handling and Industrial Robotics 2021 written by Thorsten Schüppstuhl and published by Springer Nature. This book was released on 2021 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI). The Editors Prof. Dr.-Ing. Thorsten Schüppstuhl is head of the Institute of Aircraft Production Technology (IFPT) at the Hamburg University of Technology. Prof. Dr.-Ing. Kirsten Tracht is head of the Bremen Institute for Mechanical Engineering (bime) at the University of Bremen. Prof. Dr.-Ing. Annika Raatz is head of the Institute of Assembly Technology (match) at the Leibniz University Hannover.
Download or read book Industrial Robots written by Isak Karabegović and published by . This book was released on 2020 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Industrial Robots: Design, Applications and Technology is an essential reference source that explores the fundamentals of kinematics, dynamics and industrial robot control as well as a new generation of industrial robots, the collaborative robots or cobots. The tendency in Industry 4.0 towards the mass customisation of products, shorter product cycles and quality demands has led to the introduction of collaborative robot's systems capable of learning and working hand-in-hand with humans. Collaborative robots in the industry target the enhancement of production efficiency by combining the best of human operators and the industrial robots' accuracy, speed and reliability. The advances in smart sensors, artificial intelligence, digital twin, cyber-physical systems and the adoption of exoskeletons in industrial applications have opened new possibilities for technological progress in manufacturing, which led to efficient and flexible factories. This requires individuals to be educated in trends that are now focused on the design, monitoring and control of smart production processes. Featuring coverage on a wide range of topics such as new trends in human-robot collaboration, advanced vision technology and artificial intelligence, as well as application of industry robots in metal and wood industry, this book is ideally designed for electrical engineers, mechanical engineers, manufacturers, supply chain managers, logistics specialists, investors, managers, policymakers, production scientists, researchers, academicians and students at the postgraduate level"--
Download or read book Mechatronics and Robotics written by Marina Indri and published by CRC Press. This book was released on 2020-11-24 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term “mechatronics” was coined in 1969, merging “mecha” from mechanism and “tronics” from electronics, to reflect the original idea at the basis of this discipline, that is, the integration of electrical and mechanical systems into a single device. The spread of this term, and of mechatronics itself, has been growing in the years, including new aspects and disciplines, like control engineering, computer engineering and communication/information engineering. Nowadays mechatronics has a well-defined and fundamental role, in strict relation with robotics. Drawing a sharp border between mechatronics and robotics is impossible, as they share many technologies and objectives. Advanced robots could be defined as mechatronic devices equipped with a “smart brain”, but there are also up-to-date mechatronic devices, used in tight interaction with humans, that are governed by smart architectures (for example, for safety purposes). Aim of this book is to offer a wide overview of new research trends and challenges for both mechatronics and robotics, through the contribution of researchers from different institutions, providing their view on specific subjects they consider as “hot topics” in both fields, with attention to new fields of application, new challenges to the research communities and new technologies available. The reader of this book will enjoy the various contributions, as they have been prepared with actual applications in mind, along a journey from advanced actuators and sensors to human-robot interaction, through robot control, navigation, planning and programming issues. The book presents several state-of-the-art solutions, like multiple-stage actuation to cope with conflicting specification of large motion-spans, ultra-high accuracy, model-based control for high-tech mechatronic systems, modern approaches of software systems engineering to robotics, aand humanoids for human assistance. The reader can also find new techniques in approaching the design of mechatronic systems in some possible industrial and service robotics scenarios, with a particular attention for the interaction between humans and mechanisms.
Download or read book Robotics Research written by Nancy M. Amato and published by Springer Nature. This book was released on 2019-11-28 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISRR, the "International Symposium on Robotics Research", is one of robotics pioneering Symposia, which has established over the past two decades some of the field's most fundamental and lasting contributions. This book presents the results of the eighteenth edition of "Robotics Research" ISRR17, offering a collection of a broad range of topics in robotics. This symposium took place in Puerto Varas, Chile from December 11th to December 14th, 2017. The content of the contributions provides a wide coverage of the current state of robotics research, the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope and define the state of the art of robotics and its future direction.
Download or read book Wearable Robotics written by Maria Chiara Carrozza and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on advanced topics in the areas of wearable robotics research and practice. It focuses on new technologies, including neural interfaces, soft wearable robots, sensors and actuators technologies, and discusses important regulatory challenges, as well as clinical and ethical issues. Based on the 4th International Symposium on Wearable Robotics, WeRob2018, held October 16-20, 2018, in Pisa, Italy, the book addresses a large audience of academics and professionals working in government, industry, and medical centers, and end-users alike. It provides them with specialized information and with a source of inspiration for new ideas and collaborations. It discusses exemplary case studies highlighting practical challenges related to the implementation of wearable robots in a number of fields. One of the focus is on clinical applications, which was encouraged by the colocation of WeRob2018 with the International Conference on Neurorehabilitation, INCR2018. Additional topics include space applications and assistive technologies in the industry. The book merges together the engineering, medical, ethical and political perspectives, thus offering a multidisciplinary, timely snapshot of the field of wearable technologies. .
Download or read book A review of worm like pipe inspection robots research trends and challenges written by Gabrielle Blewitt and published by OAE Publishing Inc.. This book was released on 2024-03-25 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the development of worm-like robots has increased significantly. These robots use peristaltic motion comprised of radial expansion and axial elongation to move leglessly through their environments. Soft worm-like robots have the advantage of conforming to their environment, making them ideal for confined spaces such as pipelines which are essential to societal infrastructure. Pipeline contamination and corrosion can be detrimental and costly and thus regular checking is vital. Some pipes are difficult to access due to size, access restrictions and harmful waste contamination (such as in nuclear power plants). This has led to an increase of research into soft worm-like robots for pipe inspection. This review will analyse the recent progress in this area to assess current robotic capabilities and where work may be further needed to ensure they are applicable to real-world applications.
Download or read book New Trends in Medical and Service Robotics written by Georg Rauter and published by Springer Nature. This book was released on 2020-11-09 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers of the 7th International Workshop on Medical and Service Robots (MESROB) that was planned to be held in Basel, Switzerland, in July 2020. Since the conference could not be held due to the worldwide Corona pandemic, the proceedings are published in this book and presentation of the accepted papers will be postponed to next year’s conference (MESROB 2021). The main topics of the workshop include: design of medical devices, kinematics and dynamics for medical robotics, exoskeletons and prostheses, anthropomorphic hands, therapeutic robots and rehabilitation, cognitive robots, humanoid and service robots, assistive robots and elderly assistance, surgical robots, human-robot interfaces, haptic devices, medical treatments, medical lasers, and surgical planning and navigation. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists, demonstrating that medical and service robotics will drive the technological and societal change in the coming decades.
Download or read book Robotics in Education written by Munir Merdan and published by Springer. This book was released on 2019-08-06 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book gathers the latest achievements and trends in research and development in educational robotics from the 10th International Conference on Robotics in Education (RiE), held in Vienna, Austria, on April 10–12, 2019. It offers valuable methodologies and tools for robotics in education that encourage learning in the fields of science, technology, engineering, arts and mathematics (STEAM) through the design, creation and programming of tangible artifacts for creating personally meaningful objects and addressing real-world societal needs. It also discusses the introduction of technologies ranging from robotics platforms to programming environments and languages and presents extensive evaluations that highlight the impact of robotics on students’ interests and competence development. The approaches included cover the entire educative range, from the elementary school to the university level in both formal and informal settings.
Download or read book New Trends in Robot Control written by Jawhar Ghommam and published by Springer Nature. This book was released on 2020-02-13 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents solutions to control problems in a number of robotic systems and provides a wealth of worked-out examples with full analytical and numerical details, graphically illustrated to aid in reader comprehension. It also presents relevant studies on and applications of robotic system control approaches, as well as the latest findings from interdisciplinary theoretical studies. Featuring chapters on advanced control (fuzzy, neural, backstepping, sliding mode, adaptive, predictive, diagnosis, and fault-tolerant control), the book will equip readers to easily tailor the techniques to their own applications. Accordingly, it offers a valuable resource for researchers, engineers, and students in the field of robotic systems.
Download or read book Technical Economic and Societal Effects of Manufacturing 4 0 written by Mikael Collan and published by Palgrave Macmillan. This book was released on 2020-10-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is among the first cross-disciplinary works about Manufacturing 4.0. It includes chapters about the technical, the economic, and the social aspects of this important phenomenon. Together the material presented allows the reader to develop a holistic picture of where the manufacturing industry and the parts of the society that depend on it may be going in the future. Manufacturing 4.0 is not only a technical change, nor is it a purely technically driven change, but it is a societal change that has the potential to disrupt the way societies are constructed both in the positive and in the negative. This book will be of interest to scholars researching manufacturing, technological innovation, innovation management and industry 4.0.
Download or read book Human robot Interaction written by Michael A. Goodrich and published by Now Publishers Inc. This book was released on 2007 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a unified treatment of HRI-related issues, identifies key themes, and discusses challenge problems that are likely to shape the field in the near future. The survey includes research results from a cross section of the universities, government efforts, industry labs, and countries that contribute to HRI.
Download or read book Mobile Service Robotics written by Mohammad Osman Tokhi and published by World Scientific. This book was released on 2014-07-07 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in control of climbing and walking robots has remarkably increased over the years. Novel solutions of complex mechanical systems such as climbing, walking, flying and running robots with different kinds of locomotion and the technologies that support them and their applications are the evidence of significant progress in the area of robotics. Supporting technologies include the means by which robots use to sense, model, and navigate through their environments and, of course, actuation and control technologies. Human interaction including exoskeletons, prostheses and orthoses, as well as service robots, are increasingly active important pertinent areas of research. In addition, legged machines and tracked platforms with software architecture seem to be currently the research idea of most interest to the robotics community.
Download or read book Advances in Automation and Robotics Research written by Héctor A. Moreno and published by Springer Nature. This book was released on 2021-11-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 3rd Latin American Congress on Automation and Robotics, held at Monterrey, Mexico, on November 17–19, 2021. This book presents recent advances in the modeling, design, control, and development of autonomous and robotic systems and explores current exciting applications and future challenges of these technologies. The scope of this book covers a wide range of research fields associated with automation and robotics encountered within engineering, scientific research, and practice. These topics are related to autonomous systems, industrial automation and robotics, modelling and systems identification, simulation procedures and experimental validations, control theory, artificial intelligence, computer vision, sensing and sensor fusion, multi-robot and multi-agent systems, field and service robotics, human robot interaction and interfaces, modelling of robotic systems, and the design of new robotic platforms.
