Download or read book Robotics for Bioproduction Systems written by Naoshi Kondō and published by American Society of Agricultural & Biological Engineers. This book was released on 1998 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bio robotics Information Technology and Intelligent Control for Bioproduction Systems 2000 written by Sakae Shibusawa and published by Pergamon. This book was released on 2001 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains papers presented at the 2nd IFAC/CIGR International Workshop on 'Bio-Robotics, Information Technology and Intelligent Control for Bioproduction Systems' which was held at Sakai, Osaka, Japan, from November 25-26, 2000. The purpose of the "BIO-ROBOTICS II" workshop was to provide a forum for the presentation of new approaches and results in the study of bioproduction robots, including automated and autonomous machine systems with or without manipulators, information-oriented technology to deal with variability, and intelligence technology for bioproduction systems. The discussions at the workshop focussed on the development of new automated bioproduction systems and the commercialization of various robots. To realize automated bioproduction systems, such as cultivating a field, many kinds of sensing system are obviously required to describe or recognize complex objects, and similar applications are needed in many areas of bio-robotics research. Precision farming and greenhouse technology are new integrated applications that use a systems approach to manage the spatial and temporal variability that is inherent in bioproduction systems. The presentation, discussion and exchange of knowledge, experience and inspiration among the participants during the workshop should aid solutions on global issues such as food shortage, global warming, pollution, and ecosystem instability. These proceedings will also contribute to improving the quality of research and to widen the application fields of bio-robotics, information technology and intelligent control for Bioproduction Systems.

Download or read book From batch size 1 to serial production Adaptive robots for scalable and flexible production systems written by Mohamad Bdiwi and published by Frontiers Media SA. This book was released on 2023-05-24 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Robotics written by and published by I-Tech. This book was released on 2004 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Field and Service Robotics written by Shin'ichi Yuta and published by Springer. This book was released on 2006-07-11 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique collection is the post-conference proceedings of the 4th "International Conference on Field and Service Robotics" (FSR). This book has authoritative contributors and presents current developments and new directions in field and service robotics. The book represents a cross-section of the current state of robotics research from one particular aspect: field and service applications, and how they reflect on the theoretical basis of subsequent developments.

Download or read book Bio robotics 3 written by Takashi Kataoka and published by . This book was released on 2006 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biologically Inspired Robotics written by Yunhui Liu and published by CRC Press. This book was released on 2017-12-19 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers.

Download or read book Agricultural Robots written by Naoshi Kondo and published by Apollo Books. This book was released on 2011 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of Japan's agriculture is characterized by efforts to increase production and productivity. At the beginning of the 21st century, both public and private sector research has focused on developing ever-more sophisticated tools to address a wide-range of challenges facing the agricultural industry. An amazing array of automation technologies and robots have been developed in the process, to do everything from tilling fields to picking strawberries, from planting rice seedlings to autonomously weeding the paddies. This richly-illustrated volume surveys the results of these efforts, concisely and plainly presenting specific examples of the latest robotic mechanisms and practices for agricultural applications.

Download or read book Automation in Tree Fruit Production written by Qin Zhang and published by CABI. This book was released on 2017-11-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation in agriculture is made possible by the integration of advanced agricultural technology and precision agriculture management. This book, uniquely, will focus on applications of automation to the important industry of tree fruit production. Written by experts in agricultural automation technology from around the world, chapters in this book cover topics such as automated tree fruit production systems, plant stress sensing and high-throughput phenotyping in precision horticulture, the economics of automation in tree fruit production, light interception sensing systems for canopy management, precision irrigation and water management, precision technologies for pest and disease management, opportunities for the application of robotics in tree fruit production, and the mechanical harvesting and handling of fruit crops. The book is a representative, concise overview of the variety of technologies currently being applied to tree fruit crops around the world and the challenges faced by engineers and farmers that these technologies raise. It is aimed at researchers and graduate students of agriculture systems, agricultural and biological engineering, crop and soil sciences, horticulture, precision agriculture, and other relevant disciplines. It will also be of use to agriculture consultants, engineers, and other professionals such as agricultural equipment manufacturers and management professionals who use precision agriculture technologies.

Download or read book Controlled Environment Production System for Sustainable Agricultural Production written by and published by . This book was released on 2006 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robotics and Automation in the Food Industry written by Darwin G Caldwell and published by Elsevier. This book was released on 2012-12-03 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The implementation of robotics and automation in the food sector offers great potential for improved safety, quality and profitability by optimising process monitoring and control. Robotics and automation in the food industry provides a comprehensive overview of current and emerging technologies and their applications in different industry sectors.Part one introduces key technologies and significant areas of development, including automatic process control and robotics in the food industry, sensors for automated quality and safety control, and the development of machine vision systems. Optical sensors and online spectroscopy, gripper technologies, wireless sensor networks (WSN) and supervisory control and data acquisition (SCADA) systems are discussed, with consideration of intelligent quality control systems based on fuzzy logic. Part two goes on to investigate robotics and automation in particular unit operations and industry sectors. The automation of bulk sorting and control of food chilling and freezing is considered, followed by chapters on the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery. Automatic control of batch thermal processing of canned foods is explored, before a final discussion on automation for a sustainable food industry.With its distinguished editor and international team of expert contributors, Robotics and automation in the food industry is an indispensable guide for engineering professionals in the food industry, and a key introduction for professionals and academics interested in food production, robotics and automation. - Provides a comprehensive overview of current and emerging robotics and automation technologies and their applications in different industry sectors - Chapters in part one cover key technologies and significant areas of development, including automatic process control and robotics in the food industry and sensors for automated quality and safety control - Part two investigates robotics and automation in particular unit operations and industry sectors, including the automation of bulk sorting and the use of robotics and automation in the processing and packaging of meat, seafood, fresh produce and confectionery

Download or read book Encyclopedia Of Medical Robotics The In 4 Volumes written by and published by World Scientific. This book was released on 2018-08-28 with total page 1555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Medical Robotics combines contributions in four distinct areas of Medical robotics, namely: Minimally Invasive Surgical Robotics, Micro and Nano Robotics in Medicine, Image-guided Surgical Procedures and Interventions, and Rehabilitation Robotics. The volume on Minimally Invasive Surgical Robotics focuses on robotic technologies geared towards challenges and opportunities in minimally invasive surgery and the research, design, implementation and clinical use of minimally invasive robotic systems. The volume on Micro and Nano robotics in Medicine is dedicated to research activities in an area of emerging interdisciplinary technology that is raising new scientific challenges and promising revolutionary advancement in applications such as medicine and biology. The size and range of these systems are at or below the micrometer scale and comprise assemblies of micro and nanoscale components. The volume on Image-guided Surgical Procedures and Interventions focuses primarily on the use of image guidance during surgical procedures and the challenges posed by various imaging environments and how they related to the design and development of robotic systems as well as their clinical applications. This volume also has significant contributions from the clinical viewpoint on some of the challenges in the domain of image-guided interventions. Finally, the volume on Rehabilitation Robotics is dedicated to the state-of-the-art of an emerging interdisciplinary field where robotics, sensors, and feedback are used in novel ways to re-learn, improve, or restore functional movements in humans.Volume 1, Minimally Invasive Surgical Robotics, focuses on an area of robotic applications that was established in the late 1990s, after the first robotics-assisted minimally invasive surgical procedure. This area has since received significant attention from industry and researchers. The teleoperated and ergonomic features of these robotic systems for minimally invasive surgery (MIS) have been able to reduce or eliminate most of the drawbacks of conventional (laparoscopic) MIS. Robotics-assisted MIS procedures have been conducted on over 3 million patients to date — primarily in the areas of urology, gynecology and general surgery using the FDA approved da Vinci® surgical system. The significant commercial and clinical success of the da Vinci® system has resulted in substantial research activity in recent years to reduce invasiveness, increase dexterity, provide additional features such as image guidance and haptic feedback, reduce size and cost, increase portability, and address specific clinical procedures. The area of robotic MIS is therefore in a state of rapid growth fueled by new developments in technologies such as continuum robotics, smart materials, sensing and actuation, and haptics and teleoperation. An important need arising from the incorporation of robotic technology for surgery is that of training in the appropriate use of the technology, and in the assessment of acquired skills. This volume covers the topics mentioned above in four sections. The first section gives an overview of the evolution and current state the da Vinci® system and clinical perspectives from three groups who use it on a regular basis. The second focuses on the research, and describes a number of new developments in surgical robotics that are likely to be the basis for the next generation of robotic MIS systems. The third deals with two important aspects of surgical robotic systems — teleoperation and haptics (the sense of touch). Technology for implementing the latter in a clinical setting is still very much at the research stage. The fourth section focuses on surgical training and skills assessment necessitated by the novelty and complexity of the technologies involved and the need to provide reliable and efficient training and objective assessment in the use of robotic MIS systems.In Volume 2, Micro and Nano Robotics in Medicine, a brief historical overview of the field of medical nanorobotics as well as the state-of-the-art in the field is presented in the introductory chapter. It covers the various types of nanorobotic systems, their applications and future directions in this field. The volume is divided into three themes related to medical applications. The first theme describes the main challenges of microrobotic design for propulsion in vascular media. Such nanoscale robotic agents are envisioned to revolutionize medicine by enabling minimally invasive diagnostic and therapeutic procedures. To be useful, nanorobots must be operated in complex biological fluids and tissues, which are often difficult to penetrate. In this section, a collection of four papers review the potential medical applications of motile nanorobots, catalytic-based propelling agents, biologically-inspired microrobots and nanoscale bacteria-enabled autonomous drug delivery systems. The second theme relates to the use of micro and nanorobots inside the body for drug-delivery and surgical applications. A collection of six chapters is presented in this segment. The first chapter reviews the different robot structures for three different types of surgery, namely laparoscopy, catheterization, and ophthalmic surgery. It highlights the progress of surgical microrobotics toward intracorporeally navigated mechanisms for ultra-minimally invasive interventions. Then, the design of different magnetic actuation platforms used in micro and nanorobotics are described. An overview of magnetic actuation-based control methods for microrobots, with eventually biomedical applications, is also covered in this segment. The third theme discusses the various nanomanipulation strategies that are currently used in biomedicine for cell characterization, injection, fusion and engineering. In-vitro (3D) cell culture has received increasing attention since it has been discovered to provide a better simulation environment of in-vivo cell growth. Nowadays, the rapid progress of robotic technology paves a new path for the highly controllable and flexible 3D cell assembly. One chapter in this segment discusses the applications of micro-nano robotic techniques for 3D cell culture using engineering approaches. Because cell fusion is important in numerous biological events and applications, such as tissue regeneration and cell reprogramming, a chapter on robotic-tweezers cell manipulation system to achieve precise laser-induced cell fusion using optical trapping has been included in this volume. Finally, the segment ends with a chapter on the use of novel MEMS-based characterization of micro-scale tissues instead of mechanical characterization for cell lines studies.Volume 3, Image-guided Surgical Procedures and Interventions, focuses on several aspects ranging from understanding the challenges and opportunities in this domain, to imaging technologies, to image-guided robotic systems for clinical applications. The volume includes several contributions in the area of imaging in the areas of X-Ray fluoroscopy, CT, PET, MR Imaging, Ultrasound imaging, and optical coherence tomography. Ultrasound-based diagnostics and therapeutics as well as ultrasound-guided planning and navigation are also included in this volume in addition to multi-modal imaging techniques and its applications to surgery and various interventions. The application of multi-modal imaging and fusion in the area of prostate biopsy is also covered. Imaging modality compatible robotic systems, sensors and actuator technologies for use in the MRI environment are also included in this work., as is the development of the framework incorporating image-guided modeling for surgery and intervention. Finally, there are several chapters in the clinical applications domain covering cochlear implant surgery, neurosurgery, breast biopsy, prostate cancer treatment, endovascular interventions, neurovascular interventions, robotic capsule endoscopy, and MRI-guided neurosurgical procedures and interventions.Volume 4, Rehabilitation Robotics, is dedicated to the state-of-the-art of an emerging interdisciplinary field where robotics, sensors, and feedback are used in novel ways to relearn, improve, or restore functional movements in humans. This volume attempts to cover a number of topics relevant to the field. The first section addresses an important activity in our daily lives: walking, where the neuromuscular system orchestrates the gait, posture, and balance. Conditions such as stroke, vestibular deficits, or old age impair this important activity. Three chapters on robotic training, gait rehabilitation, and cooperative orthoses describe the current works in the field to address this issue. The second section covers the significant advances in and novel designs of soft actuators and wearable systems that have emerged in the area of prosthetic lower limbs and ankles in recent years, which offer potential for both rehabilitation and human augmentation. These are described in two chapters. The next section addresses an important emphasis in the field of medicine today that strives to bring rehabilitation out from the clinic into the home environment, so that these medical aids are more readily available to users. The current state-of-the-art in this field is described in a chapter. The last section focuses on rehab devices for the pediatric population. Their impairments are life-long and rehabilitation robotics can have an even bigger impact during their lifespan. In recent years, a number of new developments have been made to promote mobility, socialization, and rehabilitation among the very young: the infants and toddlers. These aspects are summarized in two chapters of this volume.

Download or read book Fundamentals of Agricultural and Field Robotics written by Manoj Karkee and published by Springer Nature. This book was released on 2021 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past century, mechanization has been an important means for optimizing resource utilization, improving worker health and safety and reducing labor requirements in farming while increasing productivity and quality of 4F (Food, Fuel, Fiber, Feed). Recognizing this contribution, agricultural mechanization was considered as one of the top ten engineering achievements of 20th century by the National Academy of Engineering. Accordingly farming communities have adopted increasing level of automation and robotics to further improve the precision management of crops (including input resources), increase productivity and reduce farm labor beyond what has been possible with conventional mechanization technologies. It is more important than ever to continue to develop and adopt novel automation and robotic solutions into farming so that some of the most complex agricultural tasks, which require huge amount of seasonal labor such as fruit and vegetable harvesting, could be automated while meeting the rapidly increasing need for 4F. In addition, continual innovation in and adoption of agricultural automation and robotic technologies is essential to minimize the use of depleting resources including water, minerals and other chemicals so that sufficient amount of safe and healthy food can be produced for current generation while not compromising the potential for the future generation. This book aims at presenting the fundamental principles of various aspects of automation and robotics as they relate to production agriculture (the branch of agriculture dealing with farming operations from field preparation to seeding, to harvesting and field logistics). The building blocks of agricultural automation and robotics that are discussed in the book include sensing and machine vision, control, guidance, manipulation and end-effector technologies. The fundamentals and operating principles of these technologies are explained with examples from cutting-edge research and development currently going on around the word. This book brings together scientists, engineers, students and professionals working in these and related technologies to present their latest examples of agricultural automation and robotics research, innovation and development while explaining the fundamentals of the technology. The book, therefore, benefits those who wish to develop novel agricultural engineering solutions and/or to adopt them in the future. .

Download or read book Production systems design robotics automation and mechatronics written by International Conference on Industrial Systems and published by . This book was released on 1996 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robotics and Factories of the Future written by Suren N. Dwivedi and published by Springer. This book was released on 1984 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robotics and Mechatronics for Agriculture written by Dan Zhang and published by CRC Press. This book was released on 2017-11-23 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to introduce the state-of-the-art technologies in the field of robotics, mechatronics and automation in agriculture in order to summarize and review the improvements in the methodologies in agricultural robotics. Advances made in the past decades are described, including robotics for agriculture, mechatronics for agriculture, kinematics, dynamics and control analysis of agricultural robotics, and a wide range of topics in the field of robotics, mechatronics and automation for agricultural applications.

Download or read book Grasping in Robotics written by Giuseppe Carbone and published by Springer Science & Business Media. This book was released on 2012-11-15 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grasping in Robotics contains original contributions in the field of grasping in robotics with a broad multidisciplinary approach. This gives the possibility of addressing all the major issues related to robotized grasping, including milestones in grasping through the centuries, mechanical design issues, control issues, modelling achievements and issues, formulations and software for simulation purposes, sensors and vision integration, applications in industrial field and non-conventional applications (including service robotics and agriculture). The contributors to this book are experts in their own diverse and wide ranging fields. This multidisciplinary approach can help make Grasping in Robotics of interest to a very wide audience. In particular, it can be a useful reference book for researchers, students and users in the wide field of grasping in robotics from many different disciplines including mechanical design, hardware design, control design, user interfaces, modelling, simulation, sensors and humanoid robotics. It could even be adopted as a reference textbook in specific PhD courses.