Download or read book Robot Building for Beginners Third Edition written by David Cook and published by Apress. This book was released on 2015-09-02 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: "I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start."--David Cook Robot Building for Beginners, Third Edition provides basic, practical knowledge on getting started in amateur robotics. There is a mix of content: from serious reference tables and descriptions to personal stories and humorous bits. The robot described and built in this book is battery powered and about the size of a lunch box. It is autonomous; that is, it isn't remote controlled. The book is broken up into small chapters, suitable for bedtime (or bathroom) reading. The characteristics and purposes of each major component (resistor, transistor, wire, and motor) are described, followed by a hands-on experiment to demonstrate. Not only does this help the reader to understand a particular piece, but it also prepares them with processes to learn new parts on their own. An appendix offers an introduction to 3D printing and parts of the robot can, as an alternative, be "printed" using a 3D printer. The master project of the book is a simple, entertaining, line-following robot.
Download or read book Robot Building for Beginners written by David Cook and published by Apress. This book was released on 2010-07-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: “I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start.” —David Cook Robot Building for Beginners, Second Edition is an update of David Cook’s best-selling Robot Building for Beginners. This book continues its aim at teenagers and adults who have an avid interest in science and dream of building household explorers. No formal engineering education is assumed. The robot described and built in this book is battery powered and about the size of a lunchbox. It is autonomous. That is, it isn’t remote controlled. You’ll begin with some tools of the trade, and then work your way through prototyping, robot bodybuilding, and eventually soldering your own circuit boards. By the book’s end, you will have a solid amateur base of understanding so that you can begin creating your own robots to vacuum your house or maybe even rule the world!
Download or read book Robot Building For Dummies written by Roger Arrick and published by John Wiley & Sons. This book was released on 2011-05-09 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Always wanted to build a robot but didn't know where to start? This user-friendly guide shows what robots can do, how they work, and more Ready to enter the world of robotics? Then this book is for you! If you don't know much about electronics, high-tech tools, or computer programming, that’s okay. If you can work with some basic tools (such as pliers, a screwdriver, and a cutting knife), have a computer and know your way around it, and want to make a robot, you’re in the right place. Robot Building For Dummies walks you through building your very own little metal assistant from a kit, dressing it up, giving it a brain, programming it to do things, and even making it talk. In this hands-on guide that's illustrated with step-by-step instructions and written in plain English, you get an overview of robotics and the tools, technology, and skills you need to become a robot builder. You'll discover The various approaches to robot building, such as building from scratch or starting with a kit The mechanical parts of a robot and how they fit together The components of an efficient workspace and how to set one up Programming basics you need to enter and download commands into your robot How to add a controller, which lets you download software programs to your robot Using an editor program to connect to your robot The importance of preparing the parts of a robot kit and then assembling the chassis, wheels, and sensor whiskers The fun of making your robot functional by adding motion detection, light sensors, and more How to troubleshoot common problems and fix them to save your robot's life Along the way, you'll gather tidbits about robot history, enthusiasts' groups, a list of parts suppliers, and all-important safety tips. As an added bonus, Robot Building For Dummies comes with rebates for your robot building kit – no more waiting, grab your copy and start building your robot today.
Download or read book Effective Robotics Programming with ROS written by Anil Mahtani and published by Packt Publishing Ltd. This book was released on 2016-12-27 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find out everything you need to know to build powerful robots with the most up-to-date ROS About This Book This comprehensive, yet easy-to-follow guide will help you find your way through the ROS framework Successfully design and simulate your 3D robot model and use powerful robotics algorithms and tools to program and set up your robots with an unparalleled experience by using the exciting new features from Robot Kinetic Use the latest version of gazebo simulator, OpenCV 3.0, and C++11 standard for your own algorithms Who This Book Is For This book is suitable for an ROS beginner as well as an experienced ROS roboticist or ROS user or developer who is curious to learn ROS Kinetic and its features to make an autonomous Robot. The book is also suitable for those who want to integrate sensors and embedded systems with other software and tools using ROS as a framework. What You Will Learn Understand the concepts of ROS, the command-line tools, visualization GUIs, and how to debug ROS Connect robot sensors and actuators to ROS Obtain and analyze data from cameras and 3D sensors Use Gazebo for robot/sensor and environment simulation Design a robot and see how to make it map the environment, navigate autonomously, and manipulate objects in the environment using MoveIt! Add vision capabilities to the robot using OpenCV 3.0 Add 3D perception capabilities to the robot using the latest version of PCL In Detail Building and programming a robot can be cumbersome and time-consuming, but not when you have the right collection of tools, libraries, and more importantly expert collaboration. ROS enables collaborative software development and offers an unmatched simulated environment that simplifies the entire robot building process. This book is packed with hands-on examples that will help you program your robot and give you complete solutions using open source ROS libraries and tools. It also shows you how to use virtual machines and Docker containers to simplify the installation of Ubuntu and the ROS framework, so you can start working in an isolated and control environment without changing your regular computer setup. It starts with the installation and basic concepts, then continues with more complex modules available in ROS such as sensors and actuators integration (drivers), navigation and mapping (so you can create an autonomous mobile robot), manipulation, Computer Vision, perception in 3D with PCL, and more. By the end of the book, you'll be able to leverage all the ROS Kinetic features to build a fully fledged robot for all your needs. Style and approach This book is packed with hands-on examples that will help you program your robot and give you complete solutions using ROS open source libraries and tools. All the robotics concepts and modules are explained and multiple examples are provided so that you can understand them easily.
Download or read book Learn Robotics with Raspberry Pi written by Matt Timmons-Brown and published by No Starch Press. This book was released on 2019-01-22 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Learn Robotics with Raspberry Pi, you'll learn how to build and code your own robot projects with just the Raspberry Pi microcomputer and a few easy-to-get components - no prior experience necessary! Learn Robotics with Raspberry Pi will take you from inexperienced maker to robot builder. You'll start off building a two-wheeled robot powered by a Raspberry Pi minicomputer and then program it using Python, the world's most popular programming language. Gradually, you'll improve your robot by adding increasingly advanced functionality until it can follow lines, avoid obstacles, and even recognize objects of a certain size and color using computer vision. Learn how to: - Control your robot remotely using only a Wii remote - Teach your robot to use sensors to avoid obstacles - Program your robot to follow a line autonomously - Customize your robot with LEDs and speakers to make it light up and play sounds - See what your robot sees with a Pi Camera As you work through the book, you'll learn fundamental electronics skills like how to wire up parts, use resistors and regulators, and determine how much power your robot needs. By the end, you'll have learned the basics of coding in Python and know enough about working with hardware like LEDs, motors, and sensors to expand your creations beyond simple robots.
Download or read book Intermediate Robot Building written by David Cook and published by Apress. This book was released on 2010-08-13 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: For readers of Robot Building for Beginner (Apress, 2002 and 2009), welcome to the next level. Intermediate Robot Building, Second Edition offers you the kind of real-world knowledge that only renowned author David Cook can offer. In this book, you’ll learn the value of a robot heartbeat and the purpose of the wavy lines in photocells. You’ll find out what electronic part you should sand. You’ll discover how a well-placed switch can help a robot avoid obstacles better than a pair of feelers. And you’ll avoid mistakes that can cause a capacitor to explode. Want a robot that can explore rooms, follow lines, or battle opponents in mini-sumo? This book presents step-by-step instructions and circuit and part descriptions so that you can build the robot featured in the book or apply the modules to your own robot designs. Finally, you’ll find the complete schematics for Roundabout, a room explorer that requires no programming and uses only off-the-shelf electronics. With Roundabout, you’ll use many of the same techniques used by professional robotics engineers, and you’ll experience many of the same challenges and joys they feel when a robot “comes to life.”
Download or read book Make Your First Robot written by Vineesh Kumar K K and published by Notion Press. This book was released on 2017-08-24 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make your First Robot will help students to build and program their first robot using Arduino. It starts with an introduction of the hardware and software required to build and program the robots. The concepts are explained with simple analogies. Detailed explanation of the functionalities and programming of each hardware component are given. Integration of all the hardware components and programs to make a fully functional robot is explained for a mini Path-finder and Robotic Arm. Inexpensive components are used to build these robots. This book will flourish your imagination to the next level of robotics.
Download or read book The Robotics Primer written by Maja J. Mataric and published by MIT Press. This book was released on 2007-08-17 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broadly accessible introduction to robotics that spans the most basic concepts and the most novel applications; for students, teachers, and hobbyists. The Robotics Primer offers a broadly accessible introduction to robotics for students at pre-university and university levels, robot hobbyists, and anyone interested in this burgeoning field. The text takes the reader from the most basic concepts (including perception and movement) to the most novel and sophisticated applications and topics (humanoids, shape-shifting robots, space robotics), with an emphasis on what it takes to create autonomous intelligent robot behavior. The core concepts of robotics are carried through from fundamental definitions to more complex explanations, all presented in an engaging, conversational style that will appeal to readers of different backgrounds. The Robotics Primer covers such topics as the definition of robotics, the history of robotics (“Where do Robots Come From?”), robot components, locomotion, manipulation, sensors, control, control architectures, representation, behavior (“Making Your Robot Behave”), navigation, group robotics, learning, and the future of robotics (and its ethical implications). To encourage further engagement, experimentation, and course and lesson design, The Robotics Primer is accompanied by a free robot programming exercise workbook that implements many of the ideas on the book on iRobot platforms. The Robotics Primer is unique as a principled, pedagogical treatment of the topic that is accessible to a broad audience; the only prerequisites are curiosity and attention. It can be used effectively in an educational setting or more informally for self-instruction. The Robotics Primer is a springboard for readers of all backgrounds—including students taking robotics as an elective outside the major, graduate students preparing to specialize in robotics, and K-12 teachers who bring robotics into their classrooms.
Download or read book Robot Operating System ROS for Absolute Beginners written by Lentin Joseph and published by Apress. This book was released on 2018-05-24 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to get started with robotics programming using Robot Operation System (ROS). Targeted for absolute beginners in ROS, Linux, and Python, this short guide shows you how to build your own robotics projects. ROS is an open-source and flexible framework for writing robotics software. With a hands-on approach and sample projects, Robot Operating System for Absolute Beginners will enable you to begin your first robot project. You will learn the basic concepts of working with ROS and begin coding with ROS APIs in both C++ and Python. What You’ll Learn Install ROS Review fundamental ROS concepts Work with frequently used commands in ROS Build a mobile robot from scratch using ROS Who This Book Is For Absolute beginners with little to no programming experience looking to learn robotics programming.
Download or read book Absolute Beginner s Guide to Building Robots written by Gareth Branwyn and published by Que Publishing. This book was released on 2003-09-19 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook version of the printed book. If the print book includes a CD-ROM, this content is not included within the eBook version. A real-world business book for the explosion of eBay entrepreneurs! Absolute Beginner's Guide to Launching an eBay Business guides you step-by-step through the process of setting up an eBay business, and offers real-world advice on how to run that business on a day-to-day basis and maximize financial success. This book covers determining what kind of business to run, writing an action-oriented business plan, establishing an effective accounting system, setting up a home office, obtaining starting inventory, arranging initial funding, establishing an eBay presence, and arranging for automated post-auction management.
Download or read book ROS Robotics Projects written by Lentin Joseph and published by Packt Publishing Ltd. This book was released on 2017-03-31 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a variety of awesome robots that can see, sense, move, and do a lot more using the powerful Robot Operating System About This Book Create and program cool robotic projects using powerful ROS libraries Work through concrete examples that will help you build your own robotic systems of varying complexity levels This book provides relevant and fun-filled examples so you can make your own robots that can run and work Who This Book Is For This book is for robotic enthusiasts and researchers who would like to build robot applications using ROS. If you are looking to explore advanced ROS features in your projects, then this book is for you. Basic knowledge of ROS, GNU/Linux, and programming concepts is assumed. What You Will Learn Create your own self-driving car using ROS Build an intelligent robotic application using deep learning and ROS Master 3D object recognition Control a robot using virtual reality and ROS Build your own AI chatter-bot using ROS Get to know all about the autonomous navigation of robots using ROS Understand face detection and tracking using ROS Get to grips with teleoperating robots using hand gestures Build ROS-based applications using Matlab and Android Build interactive applications using TurtleBot In Detail Robot Operating System is one of the most widely used software frameworks for robotic research and for companies to model, simulate, and prototype robots. Applying your knowledge of ROS to actual robotics is much more difficult than people realize, but this title will give you what you need to create your own robotics in no time! This book is packed with over 14 ROS robotics projects that can be prototyped without requiring a lot of hardware. The book starts with an introduction of ROS and its installation procedure. After discussing the basics, you'll be taken through great projects, such as building a self-driving car, an autonomous mobile robot, and image recognition using deep learning and ROS. You can find ROS robotics applications for beginner, intermediate, and expert levels inside! This book will be the perfect companion for a robotics enthusiast who really wants to do something big in the field. Style and approach This book is packed with fun-filled, end-to-end projects on mobile, armed, and flying robots, and describes the ROS implementation and execution of these models.
Download or read book Building Your Own Robots written by Gordon McComb and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fun robotics projects that teach kids to make, hack, and learn! There's no better way for kids to learn about the world around them than to test how things work. Building Your Own Robots presents fun robotics projects that children aged 7 – 11 can complete with common household items and old toys. The projects introduce core robotics concepts while keeping tasks simple and easy to follow, and the vivid, full-color graphics keep your kid's eyes on the page as they work through the projects. Brought to you by the trusted For Dummies brand, this kid-focused book offers your child a fun and easy way to start learning big topics! They'll gain confidence as they design and build a self-propelled vehicle, hack an old remote control car to create a motorized robot, and use simple commands to build and program a virtual robot—all while working on their own and enjoying a sense of accomplishment! Offers a kid-friendly design that is heavy on eye-popping graphics Focuses on basic projects that set your child on the road to further exploration Boasts a small, full-color, accessible package that instills confidence in the reader Introduces basic robotics concepts to kids in a language they can understand If your youngster loves to tinker, they'll have a whole lot of fun while developing their creative play with the help of Building Your Own Robots.
Download or read book Learning Robotics Using Python written by Lentin Joseph and published by Packt Publishing Ltd. This book was released on 2015-05-27 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are an engineer, a researcher, or a hobbyist, and you are interested in robotics and want to build your own robot, this book is for you. Readers are assumed to be new to robotics but should have experience with Python.
Download or read book Mastering ROS for Robotics Programming written by Lentin Joseph and published by Packt Publishing Ltd. This book was released on 2015-12-21 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, build and simulate complex robots using Robot Operating System and master its out-of-the-box functionalities About This Book Develop complex robotic applications using ROS for interfacing robot manipulators and mobile robots with the help of high end robotic sensors Gain insights into autonomous navigation in mobile robot and motion planning in robot manipulators Discover the best practices and troubleshooting solutions everyone needs when working on ROS Who This Book Is For If you are a robotics enthusiast or researcher who wants to learn more about building robot applications using ROS, this book is for you. In order to learn from this book, you should have a basic knowledge of ROS, GNU/Linux, and C++ programming concepts. The book will also be good for programmers who want to explore the advanced features of ROS. What You Will Learn Create a robot model of a Seven-DOF robotic arm and a differential wheeled mobile robot Work with motion planning of a Seven-DOF arm using MoveIt! Implement autonomous navigation in differential drive robots using SLAM and AMCL packages in ROS Dig deep into the ROS Pluginlib, ROS nodelets, and Gazebo plugins Interface I/O boards such as Arduino, Robot sensors, and High end actuators with ROS Simulation and motion planning of ABB and Universal arm using ROS Industrial Explore the ROS framework using its latest version In Detail The area of robotics is gaining huge momentum among corporate people, researchers, hobbyists, and students. The major challenge in robotics is its controlling software. The Robot Operating System (ROS) is a modular software platform to develop generic robotic applications. This book discusses the advanced concepts in robotics and how to program using ROS. It starts with deep overview of the ROS framework, which will give you a clear idea of how ROS really works. During the course of the book, you will learn how to build models of complex robots, and simulate and interface the robot using the ROS MoveIt motion planning library and ROS navigation stacks. After discussing robot manipulation and navigation in robots, you will get to grips with the interfacing I/O boards, sensors, and actuators of ROS. One of the essential ingredients of robots are vision sensors, and an entire chapter is dedicated to the vision sensor, its interfacing in ROS, and its programming. You will discuss the hardware interfacing and simulation of complex robot to ROS and ROS Industrial (Package used for interfacing industrial robots). Finally, you will get to know the best practices to follow when programming using ROS. Style and approach This is a simplified guide to help you learn and master advanced topics in ROS using hands-on examples.
Download or read book A Psalm for the Wild Built written by Becky Chambers and published by Tordotcom. This book was released on 2021-07-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the Hugo Award! In A Psalm for the Wild-Built, bestselling Becky Chambers's delightful new Monk and Robot series, gives us hope for the future. It's been centuries since the robots of Panga gained self-awareness and laid down their tools; centuries since they wandered, en masse, into the wilderness, never to be seen again; centuries since they faded into myth and urban legend. One day, the life of a tea monk is upended by the arrival of a robot, there to honor the old promise of checking in. The robot cannot go back until the question of "what do people need?" is answered. But the answer to that question depends on who you ask, and how. They're going to need to ask it a lot. Becky Chambers's new series asks: in a world where people have what they want, does having more matter? At the Publisher's request, this title is being sold without Digital Rights Management Software (DRM) applied.
Download or read book Beginning Robotics with Raspberry Pi and Arduino written by Jeff Cicolani and published by Apress. This book was released on 2018-04-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to use a Raspberry Pi in conjunction with an Arduino to build a basic robot with advanced capabilities. Getting started in robotics does not have to be difficult. This book is an insightful and rewarding introduction to robotics and a catalyst for further directed study. You'll be led step by step through the process of building a robot that uses the power of a Linux based computer paired with the simplicity of Arduino. You’ll learn why the Raspberry Pi is a great choice for a robotics platform; its strengths as well as its shortcomings; how to overcome these limitations by implementing an Arduino; and the basics of the Python programming language as well as some of the more powerful features. With the Raspberry Pi you can give your project the power of a Linux computer, while Arduino makes interacting with sensors and motors very easy. These two boards are complimentary in their functions; where one falters the other performs admirably. The book also includes references to other great works to help further your growth in the exciting, and now accessible, field of smart robotics. As a bonus, the final chapter of the book demonstrates the real power of the Raspberry Pi by implementing a basic vision system. Using OpenCV and a standard USB web cam, you will build a robot that can chase a ball. What You'll Learn Install Raspbian, the operating system that drives the Raspberry Pi Drive motors through an I2C motor controller Read data through sensors attached to an Arduino Who This Book Is For Hobbyists and students looking for a rapid start in robotics. It assumes no technical background. Readers are guided to pursue the areas that interest them in more detail as they learn.
Download or read book The LEGO MINDSTORMS EV3 Laboratory written by Daniele Benedettelli and published by No Starch Press. This book was released on 2013-10-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The LEGO® MINDSTORMS® EV3 set offers so many new and exciting features that it can be hard to know where to begin. Without the help of an expert, it could take months of experimentation to learn how to use the advanced mechanisms and numerous programming features. In The LEGO MINDSTORMS EV3 Laboratory, author Daniele Benedettelli, robotics expert and member of the elite LEGO MINDSTORMS Expert Panel, shows you how to use gears, beams, motors, sensors, and programming blocks to create sophisticated robots that can avoid obstacles, walk on two legs, and even demonstrate autonomous behavior. You’ll also dig into related math, engineering, and robotics concepts that will help you create your own amazing robots. Programming experiments throughout will challenge you, while a series of comics and countless illustrations inform the discussion and keep things fun. As you make your way through the book, you’ll build and program five wicked cool robots: –ROV3R, a vehicle you can modify to do things like follow a line, avoid obstacles, and even clean a room –WATCHGOOZ3, a bipedal robot that can be programmed to patrol a room using only the Brick Program App (no computer required!) –SUP3R CAR, a rear-wheel-drive armored car with an ergonomic two-lever remote control –SENTIN3L, a walking tripod that can record and execute color-coded sequences of commands –T-R3X, a fearsome bipedal robot that will find and chase down prey With The LEGO MINDSTORMS EV3 Laboratory as your guide, you’ll become an EV3 master in no time. Requirements: One LEGO MINDSTORMS EV3 set (LEGO SET #31313)
