Download or read book Risk Analysis Concepts Applicable to the Natural Gas Industry written by John H. Martin and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk Management in the Oil and Gas Industry written by Gerardo Portela Da Ponte Jr and published by Gulf Professional Publishing. This book was released on 2021-06-09 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Management in the Oil and Gas Industry: Offshore and Onshore Concepts and Case Studies delivers the concepts, strategies and good practices of offshore and onshore safety engineering that are applicable to petroleum engineering and immediately surrounding industries. Guided by the strategic risk management line, this reference organizes steps in order of importance and priority that should be given to the themes in the practical exercise of risk management activities, from the conceptual and design phase to operational and crisis management situations. Each chapter is packed with practical case studies, lessons learned, exercises, and review questions. The reference also touches on the newest techniques, including liquefied natural gas (cryogenics) operations and computer simulations that contemplate the influence of human behavior. Critical for both the new and experienced engineer, this book gives the best didactic tool to perform operations safely and effectively. Helps readers by presenting practical case studies and exercises that are included in every chapter Presents an understanding on how to approach and apply best practices specific to the oil and gas industry, both offshore and onshore Provides the knowledge needed to gain new techniques in computer simulation and human factors to apply to various sectors of the industry, including subsea and refineries
Download or read book Risk Analysis for Prevention of Hazardous Situations in Petroleum and Natural Gas Engineering written by Matanovic, Davorin and published by IGI Global. This book was released on 2013-11-30 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accelerated growth of the world population creates an increase of energy needs. This requires new paths for oil supply to its users, which can be potential hazardous sources for individuals and the environment. Risk Analysis for Prevention of Hazardous Situations in Petroleum and Natural Gas Engineering explains the potential hazards of petroleum engineering activities, emphasizing risk assessments in drilling, completion, and production, and the gathering, transportation, and storage of hydrocarbons. Designed to aid in decision-making processes for environmental protection, this book is a useful guide for engineers, technicians, and other professionals in the petroleum industry interested in risk analysis for preventing hazardous situations.
Download or read book Application of Risk Analysis to Offshore Oil and Gas Operations written by Felix Y. Yokel and published by . This book was released on 1985 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hermes Schleifwerkzeuge written by Hermes Norddeutsche Schleifmittel-Industrie and published by . This book was released on 1977 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk Analysis and Control for Industrial Processes Gas Oil and Chemicals written by Hans J Pasman and published by Butterworth-Heinemann. This book was released on 2015-06-14 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Analysis and Control for Industrial Processes - Gas, Oil and Chemicals provides an analysis of current approaches for preventing disasters, and gives readers an overview on which methods to adopt. The book covers safety regulations, history and trends, industrial disasters, safety problems, safety tools, and capital and operational costs versus the benefits of safety, all supporting project decision processes. Tools covered include present day array of risk assessment, tools including HAZOP, LOPA and ORA, but also new approaches such as System-Theoretic Process Analysis (STPA), Blended HAZID, applications of Bayesian data analytics, Bayesian networks, and others. The text is supported by valuable examples to help the reader achieve a greater understanding on how to perform safety analysis, identify potential issues, and predict the likelihood they may appear. Presents new methods on how to identify hazards of low probability/high consequence events Contains information on how to develop and install safeguards against such events, with guidance on how to quantify risk and its uncertainty, and how to make economic and societal decisions about risk Demonstrates key concepts through the use of examples and relevant case studies
Download or read book An Introduction to Risk Analysis written by R. E. Megill and published by . This book was released on 1977 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Health and Environmental Risk Analysis written by Joseph F. Louvar and published by . This book was released on 1998 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to bring together comprehensive resources for understanding, eliminating and mitigating industrial risks, especially those associated with chemical production. A detailed understanding of risk analysis is essential in an era where governments and companies are increasingly aware of their health, safety and environmental responsibilities, yet resources are limited. This book covers all the fundamental concepts of risk analysis and ties them together with OSHA Process Safety Management and EPA Risk Management regulations. Using many examples and illustrations, it thoroughly reviews topics like: process descriptions, hazard identification, source models, fault tree analysis, consequence analysis, exposure assessment, and radiation risk assessment. There is also detailed coverage of the relationship between risk analysis and ISO 14000 standards. For: professional environmental safety, health and R&D professionals in government, communities, and chemical companies; or at storage and transportation facilities. Also for advanced students in risk analysis.
Download or read book Risk Analysis and Decision Processes written by Howard Kunreuther and published by Springer. This book was released on 1983 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Finance and Economics written by Betty Simkins and published by John Wiley & Sons. This book was released on 2013-02-20 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thought leaders and experts offer the most current information and insights into energy finance Energy Finance and Economics offers the most up-to-date information and compelling insights into the finance and economics of energy. With contributions from today's thought leaders who are experts in various areas of energy finance and economics, the book provides an overview of the energy industry and addresses issues concerning energy finance and economics. The book focuses on a range of topics including corporate finance relevant to the oil and gas industry as well as addressing issues of unconventional, renewable, and alternative energy. A timely compendium of information and insights centering on topics related to energy finance Written by Betty and Russell Simkins, two experts on the topic of the economics of energy Covers special issues related to energy finance such as hybrid cars, energy hedging, and other timely topics In one handy resource, the editors have collected the best-thinking on energy finance.
Download or read book Risk Analysis and Control for Industrial Processes Gas Oil and Chemicals written by Hans Pasman and published by . This book was released on 2015 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Analysis and Control for Industrial Processes - Gas, Oil and Chemicals provides an analysis of current approaches for preventing disasters, and gives readers an overview on which methods to adopt. The book covers safety regulations, history and trends, industrial disasters, safety problems, safety tools, and capital and operational costs versus the benefits of safety, all supporting project decision processes. Tools covered include present day array of risk assessment, tools including HAZOP, LOPA and ORA, but also new approaches such as System-Theoretic Process Analysis (STPA), Blended HAZID, applications of Bayesian data analytics, Bayesian networks, and others. The text is supported by valuable examples to help the reader achieve a greater understanding on how to perform safety analysis, identify potential issues, and predict the likelihood they may appear. Presents new methods on how to identify hazards of low probability/high consequence events Contains information on how to develop and install safeguards against such events, with guidance on how to quantify risk and its uncertainty, and how to make economic and societal decisions about risk Demonstrates key concepts through the use of examples and relevant case studies.
Download or read book Dynamic Risk Analysis in the Chemical and Petroleum Industry written by Nicola Paltrinieri and published by Butterworth-Heinemann. This book was released on 2016-08-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Risk Analysis in the Chemical and Petroleum Industry focuses on bridging the gap between research and industry by responding to the following questions: What are the most relevant developments of risk analysis? How can these studies help industry in the prevention of major accidents? Paltrinieri and Khan provide support for professionals who plan to improve risk analysis by introducing innovative techniques and exploiting the potential of data share and process technologies. This concrete reference within an ever-growing variety of innovations will be most helpful to process safety managers, HSE managers, safety engineers and safety engineering students. This book is divided into four parts. The Introduction provides an overview of the state-of-the-art risk analysis methods and the most up-to-date popular definitions of accident scenarios. The second section on Dynamic Risk Analysis shows the dynamic evolution of risk analysis and covers Hazard Identification, Frequency Analysis, Consequence Analysis and Establishing the Risk Picture. The third section on Interaction with Parallel Disciplines illustrates the interaction between risk analysis and other disciplines from parallel fields, such as the nuclear, the economic and the financial sectors. The final section on Dynamic Risk Management addresses risk management, which may dynamically learn from itself and improve in a spiral process leading to a resilient system. Helps dynamic analysis and management of risk in chemical and process industry Provides industry examples and techniques to assist you with risk- based decision making Addresses also the human, economic and reputational aspects composing the overall risk picture
Download or read book Risk Assessment and Risk Management for Natural Gas Distribution written by Ioannis S. Papadakis and published by . This book was released on 1997 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk Assessment written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces risk assessment with key theories, proven methods, and state-of-the-art applications Risk Assessment: Theory, Methods, and Applications remains one of the few textbooks to address current risk analysis and risk assessment with an emphasis on the possibility of sudden, major accidents across various areas of practice—from machinery and manufacturing processes to nuclear power plants and transportation systems. Updated to align with ISO 31000 and other amended standards, this all-new 2nd Edition discusses the main ideas and techniques for assessing risk today. The book begins with an introduction of risk analysis, assessment, and management, and includes a new section on the history of risk analysis. It covers hazards and threats, how to measure and evaluate risk, and risk management. It also adds new sections on risk governance and risk-informed decision making; combining accident theories and criteria for evaluating data sources; and subjective probabilities. The risk assessment process is covered, as are how to establish context; planning and preparing; and identification, analysis, and evaluation of risk. Risk Assessment also offers new coverage of safe job analysis and semi-quantitative methods, and it discusses barrier management and HRA methods for offshore application. Finally, it looks at dynamic risk analysis, security and life-cycle use of risk. Serves as a practical and modern guide to the current applications of risk analysis and assessment, supports key standards, and supplements legislation related to risk analysis Updated and revised to align with ISO 31000 Risk Management and other new standards and includes new chapters on security, dynamic risk analysis, as well as life-cycle use of risk analysis Provides in-depth coverage on hazard identification, methodologically outlining the steps for use of checklists, conducting preliminary hazard analysis, and job safety analysis Presents new coverage on the history of risk analysis, criteria for evaluating data sources, risk-informed decision making, subjective probabilities, semi-quantitative methods, and barrier management Contains more applications and examples, new and revised problems throughout, and detailed appendices that outline key terms and acronyms Supplemented with a book companion website containing Solutions to problems, presentation material and an Instructor Manual Risk Assessment: Theory, Methods, and Applications, Second Edition is ideal for courses on risk analysis/risk assessment and systems engineering at the upper-undergraduate and graduate levels. It is also an excellent reference and resource for engineers, researchers, consultants, and practitioners who carry out risk assessment techniques in their everyday work.
Download or read book Nutritional Care of the Patient with Gastrointestinal Disease written by Alan L Buchman and published by CRC Press. This book was released on 2015-08-06 with total page 3428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This evidence-based book serves as a clinical manual as well as a reference guide for the diagnosis and management of common nutritional issues in relation to gastrointestinal disease. Chapters cover nutrition assessment; macro- and micronutrient absorption; malabsorption; food allergies; prebiotics and dietary fiber; probiotics and intestinal microflora; nutrition and GI cancer; nutritional management of reflux; nutrition in IBS and IBD; nutrition in acute and chronic pancreatitis; enteral nutrition; parenteral nutrition; medical and endoscopic therapy of obesity; surgical therapy of obesity; pharmacologic nutrition, and nutritional counseling.
Download or read book Safety Reliability and Risk Analysis written by Sebastian Martorell and published by CRC Press. This book was released on 2008-09-10 with total page 3512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisi
Download or read book Multicriteria and Optimization Models for Risk Reliability and Maintenance Decision Analysis written by Adiel Teixeira de Almeida and published by Springer Nature. This book was released on 2022-06-28 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers a broad range of areas from decision making methods applied in the contexts of Risk, Reliability and Maintenance (RRM). Intended primarily as an update of the 2015 book Multicriteria and Multiobjective Models for Risk, Reliability and Maintenance Decision Analysis, this edited work provides an integration of applied probability and decision making. Within applied probability, it primarily includes decision analysis and reliability theory, amongst other topics closely related to risk analysis and maintenance. In decision making, it includes multicriteria decision making/aiding (MCDM/A) methods and optimization models. Within MCDM, in addition to decision analysis, some of the topics related to mathematical programming areas are considered, such as multiobjective linear programming, multiobjective nonlinear programming, game theory and negotiations, and multiobjective optimization. Methods related to these topics have been applied to the context of RRM. In MCDA, several other methods are considered, such as outranking methods, rough sets and constructive approaches. The book addresses an innovative treatment of decision making in RRM, improving the integration of fundamental concepts from both areas of RRM and decision making. This is accomplished by presenting current research developments in decision making on RRM. Some pitfalls of decision models on practical applications on RRM are discussed and new approaches for overcoming those drawbacks are presented.
