Download or read book Rheological and Morphological Properties of Dispersed Polymeric Materials written by Helmut Münstedt and published by . This book was released on 2016 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymeric Foams written by S.-T. Lee and published by CRC Press. This book was released on 2022-05-18 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Foams: Innovations in Technologies and Environmentally Friendly Materials offers the latest in technology and environmental innovations within the field of polymeric foams. It outlines how application-focused research in polymeric foam can continue to improve living quality and enhance social responsibility. This book: Addresses technological innovations including those in bead foams, foam injection molding, foams in tissue engineering, foams in insulation, and silicon rubber foam Discusses environmentally friendly innovations in PET foam, degradable and renewable foam, and physical blowing agents Describes principles as well as applications from internationally recognized foam experts This work is aimed at researchers and industry professionals across chemical, mechanical, materials, polymer engineering, and anyone else developing and applying these advanced polymeric materials.
Download or read book Deformation and Flow of Polymeric Materials written by Helmut Münstedt and published by Springer. This book was released on 2014-11-18 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the properties of single polymer molecules and polymeric materials and the methods how to characterize them. Molar masses, molar mass distributions and branching structure are discussed in detail. These properties are decisive for a deeper understanding of structure/properties relationships of polymeric materials. This book therefore describes and discusses them in detail. The mechanical behavior as a function of time and temperature is a key subject of the book. The authors present it on the basis of many original results they have obtained in their long research careers. They present the temperature dependence of mechanical properties of various polymeric materials in a wide temperature range: from cryogenic temperatures to the melt. Besides an extensive data collection on the transitions of various different polymeric materials, they also carefully present the physical explanations of the observed phenomena. Glass transition and melting temperatures are discussed, particularly, with their relevance for applications. A comprehensive part of the book deals with properties of polymers in the molten state and their decisive influence on the processing of the materials. The book presents and discusses viscous and elastic properties in detail as a function of molar mass, polydispersity, and branching. This book addresses students of polymer and materials science, as well as other natural sciences. Besides this educational value, it will also serve as a valuable monograph for everyone dealing with polymers and polymeric materials, from research, over development, to applications.
Download or read book Foamability of Thermoplastic Polymeric Materials written by Suprakas Sinha Ray and published by Elsevier. This book was released on 2021-09-24 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foamability of Thermoplastic Polymeric Materials presents a cutting-edge approach to thermoplastic polymeric foams, drawing on the latest research and guiding the reader through the fundamental science, foamability, structure-property-processing relationship, multi-phase polymeric materials, degradation characteristics of biodegradable foams and advanced applications. Sections provide detailed information on foam manufacturing technologies and the fundamental science behind foaming, present insights on the factors affecting foamability, cover ways of enhancing the foamability of various polymeric materials, with special focus on multi-phase systems, discuss the degradation of biodegradable foams and special morphology development for scaffolds, packaging, acoustic and super-insulation applications, as well as cell seeding studies in scaffolds. Each application has specific requirements in terms of desired properties. This in-depth coverage and analysis helps those looking to move forward with microcellular processing and polymer foaming. This is an ideal resource for researchers, advanced students and professionals interested in the microcellular processing of polymeric materials in the areas of polymer foaming, polymer processing, plastics engineering and materials science. Offers in-depth coverage of factors affecting foamability and methods for enhancing the foamability of polymeric materials Explores innovative applications in a range of areas, including scaffolds, acoustic applications, packaging and super-insulation Provides a comprehensive, critical overview of the state-of-the-art, possible future research directions, and opportunities for industrial application
Download or read book Polymer Rheology Theory and Practice written by Y.G. Yanovsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is devoted to a rapidly developing field of science which studies the behavior of viscoelastic materials under the influence of deformation~the rheology of polymers. Rheology has long been treated as the theoretical foundation of polymer processing, and from this standpoint it is difficult to overesti mate its importance in practice. Rheology plays an important role in developing our ideas on the nature of viscoelastic behavior in connection with the structural features of polymers and composites based on them. This expands the possibilities of employing rheological methods to characterize a variety of materials and greatly magnifies the interest in this field of research. The rheological properties of polymer systems are studied experimen tally, chiefly under conditions of shear and tensile strains. One explana tion is that many aspects of polymer material processing are associated with the stretching of melts or a combination of shear and tensile strains. In scientific investigations, either periodic or continuous conditions of shear deformation are employed. Each mode provides widespread infor mation. In periodic deformation, most attention is generally given to conditions with low deformation amplitudes that do not alter the structure of the polymer system during an experiment (the region of linear deformation conditions). Here the viscoelastic parameters are generally determined with respect to the frequency. Continuous deforma tion involves considerable strains, and may be attended by significant reversible and irreversible changes in the structure of a polymer.
Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.
Download or read book Characterization of Laminated Safety Glass Interlayers written by Miriam Schuster and published by Springer Nature. This book was released on 2022-12-21 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminated safety glass enables the safe construction of transparent structures. The mechanical behaviour depends on the polymeric interlayer both in the intact and in the post fracture state. In the present work, the mechanical behaviour of ethylene vinyl acetate-based (EVA) and ionoplastic interlayers is investigated for the intact laminated safety glass condition. In particular, the influence of the semi-crystalline structure on the stiffness behaviour is studied with X-Ray Diffraction, Differential Scanning Calorimetry and Dynamic-Mechanical-Thermal-Analysis. The studies on the mechanical behaviour of the interlayer in the fractured laminated safety glass were carried out with polyvinyl butyral-based (PVB) interlayers. First, the temperature and frequency (time) dependent linearity limits are determined in Dynamic-Mechanical-Thermal-Analyses, second, the nonlinear viscoelastic material behaviour is investigated with tensile relaxation tests at different temperatures and strain levels.
Download or read book Analytical Polymer Rheology written by Charles L. Rohn and published by . This book was released on 1995-01-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descriptions of classical theories that make the connection between rheological parameters and molecular structure of all states of matter are presented. The book demonstrates how to use rheology to probe molecular and morphological structures and interpret data.
Download or read book Elastic Behavior of Polymer Melts written by Helmut Münstedt and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-07-08 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the elastic properties of polymer melts is necessary for ensuring successful polymer processing and thus producing high-quality plastic parts. This unique book is the first to focus on this important topic. Starting with the molecular origin of elastic behavior and an explanation of the physical quantities involved, experimental methods and the dependence of elastic behavior on experimental parameters are then presented. Elastic properties of filled and unfilled systems are compared directly, and polymer blends are also considered. Elastic effects in various applications are included, such as in extrudate swell, internal stresses, and shrink films, to illustrate the importance of this field in the plastics processing industry.
Download or read book Rheology and Processing of Polymeric Materials written by Chang Dae Han and published by Oxford University Press on Demand. This book was released on 2007-05-16 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents first fundamental principles of the rheology of polymeric fluid including kinematics and stresses of a deformable body, the continuum theory for the viscoelasticity of flexible homogeneous polymeric liquids, the molecular theory for the viscoelasticity of flexible homogeneous polymeric liquids, and the experimental methods for the measurement of the rheological properties of poylmeric liquids. The materials presented are intended to set a stage for the subsequent chapters by introducing the basic concepts and principles of rheology, from both phenomenological and molecular perspectives, ofstructurally simple flexible and homogeneous polymeric liquids. Next, this volume presents the rheological behavior of structurally complex polymeric materials including miscible polymer blends, block copolymers, liquid-crystalline polymers, thermoplastic polyurethanes, immiscible polymer blends, perticulare-filled polymers, organoclay nanocomposites, molten polymers with dissolved gas, and thermosts.
Download or read book Polymer Melt Rheology written by F N Cogswell and published by Elsevier. This book was released on 1981-01-01 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the ways in which melt flow behaviour can be exploited by the plastics engineer and technician for increased efficiency of processing operation, control of end product properties and selection and development of polymers for specific purposes. (reissued with minor corrections 1994)
Download or read book Advanced Polymeric Materials written by Gabriel O. Shonaike and published by CRC Press. This book was released on 2003-04-14 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from experts at some of the world's leading academic and industrial institutions, Advanced Polymeric Materials: Structure Property Relationships brings into book form a wealth of information previously available primarily only within computer programs. In a welcome narrative treatment, it provides comprehensive coverage of p
Download or read book Multiphase Polymer Systems written by Andreea Irina Barzic and published by CRC Press. This book was released on 2016-09-19 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase morphology in multicomponent polymer-based systems represents the main physical characteristic that allows for control of the material design and implicitly the development of new plastics. Emphasizing properties of these promising new materials in both solution and solid phase, this book describes the preparation, processing, properties, and practical implications of advanced multiphase systems from macro to nanoscales. It covers a wide range of systems including copolymers, polymer blends, polymer composites, gels, interpenetrating polymers, and layered polymer/metal structures, describing aspects of polymer science, engineering, and technology. The book analyzes experimental and theoretical aspects regarding the thermal and electrical transport phenomena and magnetic properties of crucial importance in advanced technologies. It reviews the most recent advances concerning morphological, rheological, interfacial, physical, fire-resistant, thermophysical, and biomedical properties of multiphase polymer systems. Concomitantly the book deals with basic investigation techniques that are sensitive in elucidating the features of each phase. It also discusses the latest research trends that offer new solutions for advanced bio- and nanotechnologies. Introduces an overview of recent studies in the area of multiphase polymer systems, their micro- and nanostructural evolutions in advanced technologies, and provides future outlooks, new challenges and opportunities. Discusses multicomponent structures that offer enhanced physical, mechanical, thermal, electrical, magnetic, and optical properties adapted to current requirements of modern technologies. Covers a wide range of materials, such as composites, blends, alloys, gels and interpenetrating polymer networks. Presents new strategies for controlling the micro- and nanomorphology and the mechanical properties of multiphase polymeric materials. Describes different applications of multiphase polymeric materials in various fields, including automotive, aeronautics and space industry, displays, and medicine.
Download or read book Advances in Polymer Materials and Technology written by Anandhan Srinivasan and published by CRC Press. This book was released on 2016-08-19 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancements in the field of polymer science and technology. Frontiers areas, such as polymers based on bio-sources, polymer based ferroelectrics, polymer nanocomposites for capacitors, food packaging and electronic packaging, piezoelectric sensors, polymers from renewable resources, superhydrophobic materials and electrospinning are topics of discussion. The contributors to this book are expert researchers from various academic institutes and industries from around the world.
Download or read book Applied Polymer Rheology written by Marianna Kontopoulou and published by John Wiley & Sons. This book was released on 2011-10-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore polymer rheology from an industrial standpoint Presenting state-of-the-art polymer rheology as observed by well-recognized authors, Applied Polymer Rheology: Polymeric Fluids with Industrial Applications is designed to help readers understand the relationship between molecular structure and the flow behavior of polymers. In particular, it focuses on polymeric systems that elicit special attention from industry. Providing a comprehensive overview of the rheological characteristics of polymeric fluids, the book bridges the gap between theory and practice/application, enabling readers to see the connection between molecular structure and the behavior of the polymers studied. Beginning with a discussion of the properties, processability, and processing aids of specific polymers, later chapters examine filled polymers and composites, and the theoretical framework upon which their analysis is based. Various systems containing microstructure are presented subsequently, with the final chapter introducing paste extrusion of polytetrafluoroethylene paste. An invaluable reference guide that covers the literature and vast array of technical approaches to polymer rheology, Applied Polymer Rheology's coverage of polymeric fluids of interest to industry make it an essential resource for plastics, polymer, and chemical engineers, materials scientists, polymer chemists, and polymer physicists to use when interpreting findings and planning experiments.
Download or read book Nanofillers for Binary Polymer Blends written by Sabu Thomas and published by Elsevier. This book was released on 2024-06-28 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofillers for Binary Polymer Blends covers major advances in the field of polymer-blend nanocomposites. The book encompasses the fundamentals of polymer blends, various nanofillers, experimental techniques used in their fabrication, the characterization of various polymer blend nanocomposites, and theoretical evaluations of various properties. The properties and potential applications that have been achieved in various polymer blends by the addition of nanofillers are also highlighted. Applications for commercial products, including automotive parts, packaging, construction materials, biotechnology, medical devices, building materials, computer housings, car interiors, etc., are also covered in detail.This is an important reference source for materials scientists and engineers looking to increase their understanding of how nanofillers are being used in polymer blends. Outlines the various types of nanofillers, explaining how the properties of each enhances the morphology, rheology, mechanical, dynamic mechanical, viscoelastic, electrical and thermal properties of polymer blends Provides information on the theory, modeling and simulation of nano-filled polymer blends Assesses the mechanism of selective localization of nanofillers in polymer blends, the effect of localization of nanofillers on the microstructure, and the relative performance of polymer blends
Download or read book Rheology in Polymer Processing written by Chang Dae Han and published by . This book was released on 1976 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
