Download or read book RF Microwave Power Amplifiers and Oscillators written by Andrei Grebennikov and published by Newnes. This book was released on 2001-10-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF and Microwave Power Amplifiers and Oscillators written by Andrei Grebennikov and published by Noble Publishing. This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.
Download or read book RF and Microwave Transistor Oscillator Design written by Andrei Grebennikov and published by John Wiley & Sons. This book was released on 2007-04-30 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer electronics and communications applications using Radio Frequency (RF) and microwave circuits has implications for oscillator design. Applications working at higher frequencies and using novel technologies have led to a demand for more robust circuits with higher performance and functionality, but decreased costs, size and power consumption. As a result, there is also a need for more efficient oscillators. This book presents up to date information on all aspects of oscillator design, enabling a selection of the best oscillator topologies with optimized noise reduction and electrical performance. RF and Microwave Transistor Oscillator Design covers: analyses of non-linear circuit design methods including spectral-domain analysis, time-domain analysis and the quasilinear method; information on noise in oscillators including chapters on varactor and oscillator frequency tuning, CMOS voltage-controlled oscillators and wideband voltage-controlled oscillators; information on the stability of oscillations, with discussions on the stability of multi-resonant circuits and the phase plane method; optimized design and circuit techniques, beginning with the empirical and analytic design approaches, moving on to the high-efficiency design technique; general operation and design principles of oscillators, including a section on the historical aspects of oscillator configurations. A valuable reference for practising RF and Microwave designers and engineers, RF and Microwave Transistor Oscillator Design is also useful for lecturers, advanced students and research and design (R&D) personnel.
Download or read book RF and Microwave Power Amplifier Design written by Andrei Grebennikov and published by McGraw Hill Professional. This book was released on 2004-09-15 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a rigorous tutorial on radio frequency and microwave power amplifier design, teaching the circuit design techniques that form the microelectronic backbones of modern wireless communications systems. Suitable for self-study, corporate training, or Senior/Graduate classroom use, the book combines analytical calculations and computer-aided design techniques to arm electronic engineers with every possible method to improve their designs and shorten their design time cycles.
Download or read book Design of RF and Microwave Amplifiers and Oscillators written by Pieter L. D. Abrie and published by Artech House Publishers. This book was released on 2009 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised edition offers a comprehensive and current treatment of the subject and includes expanded derivations and problem sets, helping to make the material even more accessible and easier to master.
Download or read book RF and Microwave Power Amplifier Design Second Edition written by Andrei Grebennikov and published by McGraw Hill Professional. This book was released on 2015-02-09 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest power amp design methods Fully updated to address cutting-edge technologies, the new edition of this practical guide provides comprehensive, state-of-the-art coverage of RF and microwave power amplifier design. The book describes both existing and new schematic configurations, theoretical approaches, circuit simulation results, and implementation techniques. New chapters discuss linearization and efficiency enhancement and high-efficiency Doherty power amplifiers. Featuring a systematic approach, this comprehensive resource bridges the theory and practice of RF and microwave engineering. RF and Microwave Power Amplifier Design, Second Edition, covers: Two-port network parameters and passive elements Nonlinear circuit design methods Nonlinear active device modeling Impedance matching Power transformers, combiners, and couplers Power amplifier design fundamentals High-efficiency power amplifier design Broadband power amplifiers Linearization and efficiency enhancement techniques High-efficiency Doherty power amplifiers
Download or read book Microwave and RF Design Volume 5 written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Amplifiers and Oscillators presents the design of amplifiers and oscillators in a way that enables state-of-the-art designs to be realized. Detailed strategies and case studies are presented. Design of competitive microwave amplifiers and oscillators is particularly challenging as many trade-offs are required in design, and the design decisions cannot be reduced to a formulaic flow. The emphasis is on developing design skills. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book. Key Features * The fifth volume of a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 9 worked examples * An average of 23 exercises per chapter * Answers to selected exercises * 6 extensive case studies following the design of competitive amplifiers and oscillators with world leading performance * Volume 5 of a five volume series on microwave and RF design, all available as open access ebooks * A companion book, Fundamentals of Microwave and RF Design, is suitable as a comprehensive undergraduate textbook on microwave engineering
Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.
Download or read book Solid state Microwave High power Amplifiers written by Franco Sechi and published by Artech House. This book was released on 2009 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical resource offers expert guidance on the most critical aspects of microwave power amplifier design. This comprehensive book provides descriptions of all the major active devices, discusses large signal characterization, explains all the key circuit design procedures. Moreover you gain keen insight on the link between design parameters and technological implementation, helping you achieve optimal solutions with the most efficient utilization of available technologies. The book covers a broad range of essential topics, from requirements for high-power amplifiers, device models, phase noise and power combiners... to high-efficiency amplifiers, linear amplifier design, bias circuits, and thermal design.
Download or read book Handbook of RF and Microwave Power Amplifiers written by John L. B. Walker and published by Cambridge University Press. This book was released on 2012 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a one-stop guide for circuit designers and system/device engineers, covering everything from CAD to reliability.
Download or read book RF Power Amplifiers written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2014-10-14 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the highly acclaimed RF Power Amplifiers has been thoroughly revised and expanded to reflect the latest challenges associated with power transmitters used in communications systems. With more rigorous treatment of many concepts, the new edition includes a unique combination of class-tested analysis and industry-proven design techniques. Radio frequency (RF) power amplifiers are the fundamental building blocks used in a vast variety of wireless communication circuits, radio and TV broadcasting transmitters, radars, wireless energy transfer, and industrial processes. Through a combination of theory and practice, RF Power Amplifiers, Second Edition provides a solid understanding of the key concepts, the principle of operation, synthesis, analysis, and design of RF power amplifiers. This extensive update boasts: up to date end of chapter summaries; review questions and problems; an expansion on key concepts; new examples related to real-world applications illustrating key concepts and brand new chapters covering ‘hot topics’ such as RF LC oscillators and dynamic power supplies. Carefully edited for superior readability, this work remains an essential reference for research & development staff and design engineers. Senior level undergraduate and graduate electrical engineering students will also find it an invaluable resource with its practical examples & summaries, review questions and end of chapter problems. Key features: • A fully revised solutions manual is now hosted on a companion website alongside new simulations. • Extended treatment of a broad range of topologies of RF power amplifiers. • In-depth treatment of state-of-the art of modern transmitters and a new chapter on oscillators. • Includes problem-solving methodology, step-by-step derivations and closed-form design equations with illustrations.
Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.
Download or read book Switchmode RF and Microwave Power Amplifiers written by Andrei Grebennikov and published by Academic Press. This book was released on 2021-03-19 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switchmode RF and Microwave Power Amplifiers, Third Edition is an essential reference book on developing RF and microwave switchmode power amplifiers. The book combines theoretical discussions with practical examples, allowing readers to design high-efficiency RF and microwave power amplifiers on different types of bipolar and field-effect transistors, design any type of high-efficiency switchmode power amplifiers operating in Class D or E at lower frequencies and in Class E or F and their subclasses at microwave frequencies with specified output power, also providing techniques on how to design multiband and broadband Doherty amplifiers using different bandwidth extension techniques and implementation technologies. This book provides the necessary information to understand the theory and practical implementation of load-network design techniques based on lumped and transmission-line elements. It brings a unique focus on switchmode RF and microwave power amplifiers that are widely used in cellular/wireless, satellite and radar communication systems which offer major power consumption savings. Provides a complete history of high-efficiency Class E and Class F techniques Presents a new chapter on Class E with shunt capacitance and shunt filter to simplify the design of high-efficiency power amplifier with broader frequency bandwidths Covers different Doherty architectures, including integrated and monolithic implementations, which are and will be, used in modern communication systems to save power consumption and to reduce size and costs Includes extended coverage of multiband and broadband Doherty amplifiers with different frequency ranges and output powers using different bandwidth extension techniques Balances theory with practical implementation, avoiding a cookbook approach and enabling engineers to develop better designs, including hybrid, integrated and monolithic implementations
Download or read book Microwave Power Amplifier Design with MMIC Modules written by Howard Hausman and published by Artech House. This book was released on 2018-06-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state power amplifiers (SSPA) are a critical part of many microwave systems. Designing SSPAs with monolithic microwave integrated circuits (MMIC) has boosted device performance to much higher levels focused on PA modules. This cutting-edge book offers engineers practical guidance in selecting the best power amplifier module for a particular application and interfacing the selected module with other power amplifier modules in the system. It also explains how to identify and mitigate peripheral issues concerning the PA modules, SSPAs, and microwave systems. This authoritative volume presents the critical techniques and underpinnings of SSPA design, enabling professionals to optimize device and system performance. Engineers gain the knowledge they need to evaluate the optimum topologies for the design of a chain of microwave devices, including power amplifiers. Additionally, the book addresses the interface between the microwave subsystems and the primary DC power, the control and monitoring circuits, and the thermal and EMI paths. Packed with 240 illustrations and over 430 equations, this detailed book provides the practical tools engineers need for their challenging projects in the field.
Download or read book Advanced Techniques in RF Power Amplifier Design written by Steve C. Cripps and published by Artech House. This book was released on 2002 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This much-anticipated volume builds on the author's popular work, RF Power Amplifiers for Wireless Communications (Artech House, 1999), offering you a more in-depth understanding of the theory and design of RF power amplifiers. An invaluable reference tool for RF, digital and system level designers, the book enables you to efficiently design linear RF power amplifiers , and includes detailed discussions on envelope power management schemes and linearization techniques.
Download or read book RF and Microwave Circuits Measurements and Modeling written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the challenges RF and microwave circuit designers face in their day-to-day tasks, RF and Microwave Circuits, Measurements, and Modeling explores RF and microwave circuit designs in terms of performance and critical design specifications. The book discusses transmitters and receivers first in terms of functional circuit block and then examines each block individually. Separate articles consider fundamental amplifier issues, low noise amplifiers, power amplifiers for handset applications and high power, power amplifiers. Additional chapters cover other circuit functions including oscillators, mixers, modulators, phase locked loops, filters and multiplexers. New chapters discuss high-power PAs, bit error rate testing, and nonlinear modeling of heterojunction bipolar transistors, while other chapters feature new and updated material that reflects recent progress in such areas as high-volume testing, transmitters and receivers, and CAD tools. The unique behavior and requirements associated with RF and microwave systems establishes a need for unique and complex models and simulation tools. The required toolset for a microwave circuit designer includes unique device models, both 2D and 3D electromagnetic simulators, as well as frequency domain based small signal and large signal circuit and system simulators. This unique suite of tools requires a design procedure that is also distinctive. This book examines not only the distinct design tools of the microwave circuit designer, but also the design procedures that must be followed to use them effectively.
Download or read book Introduction to Microwave Circuits written by Robert J. Weber and published by John Wiley & Sons. This book was released on 2001-01-23 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Do you want to design a wireless transmitter or receiver for hand-held telephones? Have you wondered why the printed circuit wires on high-frequency circuits don't always run in a straight line? This valuable text will answer all of your questions regarding component parasitics and circuit characterization for rf/microwave amplifier, oscillator, and filter circuit design and analysis. You will understand why capacitors act as inductors and vice versa and why amplifiers work like oscillators, while oscillators for local area networks work more like local area heaters. Application of the information in Introduction to Microwave Circuits will reduce design-cycle time and costs, markedly increasing the probability of first-time success in printed circuit or monolithic microwave integrated circuit (MMIC) design. Several approaches are taken into consideration, such as the effects of currents on the ground plane, bypass and coupling capacitors, and nonlinear effects in linear circuits. Featured topics include: * Incorporation of component parasitics in the design cycle * Closed form solution to oscillator design * Odd mode stability analysis * PIN diode analysis for high-power switching applications An integrated design example of a 1.25 GHz amplifier, oscillator, and filter printed circuit is also included, which could be useful in printed circuit board designs from tens of megahertz to tens of gigahertz. Introduction to Microwave Circuits provides the tools necessary to analyze or synthesize microwave circuits. This text is an essential reference for undergraduate students, microwave engineers, and administrators. Also, it will assist experienced designers in other fields to meet the current rapid expansion of communication system applications and work effectively in microwave circuit design. About the Author Robert J. Weber began his prolific career in the Solid State Research Laboratory at the Collins Radio Company, later a part of Rockwell International. For 25 years, he worked on advanced development and applied research in the one- to ten-gigahertz frequency range and received several distinguished awards for his valuable contributions to the field. Dr. Weber is involved in ongoing experimental research in integrating microwave circuits with other devices such as MEMS, chemical sensors, and electro-optics. Also, he teaches microwave circuit design and fiber-optics communications at the Department of Electrical and Computer Engineering, Iowa State University. Dr. Weber is an IEEE Fellow." Sponsored by: IEEE Microwave Theory and Techniques Society.
