Download or read book Safe Handling of Tritium written by International Atomic Energy Agency and published by . This book was released on 1991 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains information on the dosimetry and monitoring of tritium, the use of protective clothing for work with tritium, safe practices in tritium handling laboratories and details of tritium compatible materials. The information has been compiled from experience in the various applications of tritium and should represent valuable source material to all users of tritium, including those involved in fusion R&D.
Download or read book An Introduction to Nuclear Waste Immobilisation written by Michael I Ojovan and published by Elsevier. This book was released on 2013-12-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on the authors' extensive experience in the processing and disposal of waste, An Introduction to Nuclear Waste Immobilisation, Second Edition examines the gamut of nuclear waste issues from the natural level of radionuclides in the environment to geological disposal of waste-forms and their long-term behavior. It covers all-important aspects of processing and immobilization, including nuclear decay, regulations, new technologies and methods. Significant focus is given to the analysis of the various matrices used, especially cement and glass, with further discussion of other matrices such as bitumen. The final chapter concentrates on the performance assessment of immobilizing materials and safety of disposal, providing a full range of the resources needed to understand and correctly immobilize nuclear waste.
Download or read book High Velocity Impact Dynamics written by Jonas A. Zukas and published by Wiley-Interscience. This book was released on 1990-11-08 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium of mathematical techniques for the modeling and simulation of high-velocity impacts presents the various analytical and experimental aspects of impact dynamics and describes the responses of a variety of materials and structures under impact. Coverage is extended beyond that of the author's Impact Dynamics and deals with new topics in impacts involving inert materials, including the dynamic response to energetic and inert materials. Treatment uses classical mechanics along with the conservation laws, combined with failure analysis.
Download or read book Walden Pond Massachusetts written by John A. Colman and published by . This book was released on 1998 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiological Safety Regulations written by United States Navy Department. Medicine and Surgery Bureau and published by . This book was released on 1951 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2011-07-20 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. - Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field - The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology - This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb
Download or read book Precision and Purpose written by Karl P. Mueller and published by Rand Corporation. This book was released on 2015-07-08 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: A team of U.S. and international experts assesses the impact of various nations’ airpower efforts during the 2011 conflict in Libya, including NATO allies and non-NATO partners, and how their experiences offer guidance for future conflicts. In addition to the roles played by the United States, Britain and France, it examines the efforts of Italy, Canada, Belgium, Denmark, the Netherlands, Norway, Sweden, Qatar, the UAE, and the Libyan rebels.
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phthalonitrile Resins and Composites written by Mehdi Derradji and published by William Andrew. This book was released on 2018-04-25 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phthalonitrile Resins and Composites: Properties and Applications summarizes the latest research on these polymers, providing information that enables materials scientists and engineers to deploy these polymers in the real world. The book gives details on synthesis and preparation techniques for key phthalonitrile monomers. All curing techniques are discussed, along with blends and copolymers of phthalonitrile with other polymeric materials, such as epoxy, benzoxazine and bismaleimide. Fiber and particle based phthalonitrile micro and nanocomposites are also discussed, along with their potential applications in lightweight automobiles, ships, oil rigs, aircraft, wind blades, high temperature bearings, valves, battery and electronic casings, fire resistant textiles, and more. - Introduces the subject of phthalonitrile polymers and their composites - Provides precise information on the synthesis, preparation and curing techniques for phthalonitrile polymers - Discusses developments in key application areas that are intended to facilitate and stimulate real world applications of these materials
Download or read book The Nuclear Fuel Cycle written by Nicholas Tsoulfanidis and published by . This book was released on 2013 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ANL CNSV written by and published by . This book was released on 1981 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boiling Water Reactor Plant written by United Engineers & Constructors, inc and published by . This book was released on 1972 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Passivation of Industrial Crystalline Silicon Solar Cells written by Joachim John and published by Institution of Engineering and Technology. This book was released on 2018-11-15 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface passivation of silicon solar cells describes a technology for preventing electrons and holes to recombine prematurely with one another on the wafer surface. It increases the cell's energy conversion efficiencies and thus reduces the cost per kWh generated by a PV system.
Download or read book Physical Properties and Applications of Polymer Nanocomposites written by S C Tjong and published by Elsevier. This book was released on 2010-10-29 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are polymer matrices reinforced with nano-scale fillers. This new class of composite materials has shown improved mechanical and physical properties. The latter include enhanced optical, electrical and dielectric properties. This important book begins by examining the characteristics of the main types of polymer nanocomposites, then reviews their diverse applications.Part one focuses on polymer/nanoparticle composites, their synthesis, optical properties and electrical conductivity. Part two describes the electrical, dielectric and thermal behaviour of polymer/nanoplatelet composites, whilst polymer/nanotube composites are the subject of Part three. The processing and industrial applications of these nanocomposite materials are discussed in Part four, including uses in fuel cells, bioimaging and sensors as well as the manufacture and applications of electrospun polymer nanocomposite fibers, nanostructured transition metal oxides, clay nanofiller/epoxy nanocomposites, hybrid epoxy-silica-rubber nanocomposites and other rubber-based nanocomposites.Polymer nanocomposites: Physical properties and applications is a valuable reference tool for both the research community and industry professionals wanting to learn about the these materials and their applications in such areas as fuel cell, sensor and biomedical technology. - Examines the characteristics of the main types of polymer nanocomposites and reviews their diverse applications - Comprehensively assesses polymer/nanoparticle composites exploring experimental techniques and data associated with the conductivity and dielectric characterization - A specific section on polymer/nanotube composites features electrical and dielectric behaviour of polymer/carbon nanotube composites
Download or read book Polymer Nanoclay Composites written by Stephan Laske and published by William Andrew. This book was released on 2015-01-09 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a major lack of fundamental knowledge and understanding on the interaction between a filler and the polymer matrix. When it comes to nanoscale fillers, such as layered silicates, carbon nanotubes, graphene or cellulose nanofibers it is even more important to know accurate structure-property relationships as well as identifying the parameters influencing material behavior. The reason for the lack of knowledge on how to process nanocomposites and why there are so few applications is that several scientific fields are affected and a joint effort of those scientific communities involved is necessary – starting from the filler manufacturing or pre-processing over polymer chemistry to the polymer processing. In Polymer Nanoclay Composites, all involved scientific areas are viewed together for the first time, providing an all-embracing coverage of all stages of polymer clay nanocomposites processing from lab-scale to industrial scale – stages from the raw material over manufacturing of polymer clay nanocomposites to characterization and the final products. Readers will gain insight in the physical/chemical pre-processing of layered silicates and their incorporation into a polymer matrix using sophisticated technologies (such as advanced compounding) as well as in real-time quality control of the nanocomposite production and future prospects. The book also describes nanotoxicological and nanosafety aspects. - Covers the whole processing route with all aspects of the nanocomposites industry with particular focus on the processing of polymer clay nanocomposites - Includes quality control and nanosafety - Multidisciplinary approach from an industrial perspective
