Download or read book Resistive switching in ZrO2 based metal oxide metal structures written by Irina Kärkkänen and published by Forschungszentrum Jülich. This book was released on 2014 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides for Non volatile Memory written by Panagiotis Dimitrakis and published by Elsevier. This book was released on 2022-03-01 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Non-volatile Memory: Materials, Technology and Applications covers the technology and applications of metal oxides (MOx) in non-volatile memory (NVM) technology. The book addresses all types of NVMs, including floating-gate memories, 3-D memories, charge-trapping memories, quantum-dot memories, resistance switching memories and memristors, Mott memories and transparent memories. Applications of MOx in DRAM technology where they play a crucial role to the DRAM evolution are also addressed. The book offers a broad scope, encompassing discussions of materials properties, deposition methods, design and fabrication, and circuit and system level applications of metal oxides to non-volatile memory. Finally, the book addresses one of the most promising materials that may lead to a solution to the challenges in chip size and capacity for memory technologies, particular for mobile applications and embedded systems. Systematically covers metal oxides materials and their properties with memory technology applications, including floating-gate memory, 3-D memory, memristors, and much more Provides an overview on the most relevant deposition methods, including sputtering, CVD, ALD and MBE Discusses the design and fabrication of metal oxides for wide breadth of non-volatile memory applications from 3-D flash technology, transparent memory and DRAM technology
Download or read book Istc cstic 2009 cistc written by David Huang and published by The Electrochemical Society. This book was released on 2009-03 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISTC/CSTIC is an annual semiconductor technology conference covering all the aspects of semiconductor technology and manufacturing, including devices, design, lithography, integration, materials, processes, manufacturing as well as emerging semiconductor technologies and silicon material applications. ISTC/CSTIC 2009 was merged by ISTC (International Semiconductor Technology Conference) and CSTIC (China Semiconductor Technology International Conference), the two industry leading technical conferences in China, and consisted of one plenary session and nine technical symposia. This issue of ECS Transactions contains 159 papers from the conference.
Download or read book Advances in Ceramics for Environmental Functional Structural and Energy Applications written by Morsi M. Mahmoud and published by John Wiley & Sons. This book was released on 2018-09-27 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 20 manuscripts presented during the Materials Science & Technology 2017 Conference (MS&T'17), held October 8-12, 2017 at the David L. Lawrence Convention Center, Pittsburgh, PA. Papers from the following symposia are included in this volume: 9th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing Advances in Dielectric Materials and Electronic Devices Construction and Building Materials for a Better Environment Innovative Processing and Synthesis of Ceramics, Glasses and Composites Materials Issues in Nuclear Waste Management in the 21st Century Materials Development for Nuclear Applications and Extreme Environments Materials for Nuclear Energy Applications Nanotechnology for Energy, Healthcare and Industry Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work – Rustum Roy Symposium These symposia provided a forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis, characterization, and applications of ceramics, glasses, and composites. Each manuscript was peer-reviewed using The American Ceramic Society's review process. The editors wish to extend their gratitude and appreciation to their symposium co-organizers, to all of the authors for their valuable submissions, to all the participants and session chairs for their time and effort, and to all the reviewers for their comments and suggestions. We hope that this volume will serve as a useful reference for the professionals working in the field of materials science.
Download or read book Physics Chemistry And Applications Of Nanostructures Proceedings Of The International Conference Nanomeeting 2015 written by Victor E Borisenko and published by World Scientific. This book was released on 2015-05-04 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents invited reviews and original short notes of recent results obtained in studies concerning the fabrication and application of nanostructures, which hold great promise for the new generation of electronic, optoelectronic and energy conversion devices. They present achievements discussed at Special Sessions 'Frontiers of Two-Dimensional Crystals', 'Nanoelectromagnetics' and Belarus-Korea Workshop 'Frontiers of Advanced Nanodevices' organized within Nanomeeting 2015.Governing exciting and relatively new topics such as fast-progressing nanoelectronics and optoelectronics, molecular electronics and spintronics, nanophotonics, nanosensorics and nanoenergetics as well as nanotechnology and quantum processing of information, this book gives readers a more complete understanding of the practical uses of nanotechnology and nanostructures.
Download or read book Memristor Technology Synthesis and Modeling for Sensing and Security Applications written by Heba Abunahla and published by Springer. This book was released on 2017-09-18 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a single-source guide to fabricate, characterize and model memristor devices for sensing applications. The authors describe a correlated, physics-based model to simulate and predict the behavior of devices fabricated with different oxide materials, active layer thickness, and operating temperature. They discuss memristors from various perspectives, including working mechanisms, different synthesis methods, characterization procedures, and device employment in radiation sensing and security applications.
Download or read book Metal Oxide Defects written by Vijay Kumar and published by Elsevier. This book was released on 2022-11-19 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Defects: Fundamentals, Design, Development and Applications provides a broad perspective on the development of advanced experimental techniques to study defects and their chemical activity and catalytic reactivity in various metal oxides. This book highlights advances in characterization and analytical techniques to achieve better understanding of a wide range of defects, most importantly, state-of-the-art methodologies for controlling defects. The book provides readers with pathways to apply basic principles and interpret the behavior of metal oxides. After reviewing characterization and analytical techniques, the book focuses on the relationship of defects to the properties and performance of metal oxides. Finally, there is a review of the methods to control defects and the applications of defect engineering for the design of metal oxides for applications in optoelectronics, energy, sensing, and more. This book is a key reference for materials scientists and engineers, chemists, and physicists. Reviews advances in characterization and analytical techniques to understand the behavior of defects in metal oxide materials Introduces defect engineering applied to the design of metal oxide materials with desirable properties Discusses applications of defect engineering to enhance the performance of materials for a wide range of applications, with an emphasis on optoelectronics
Download or read book Functional Metal Oxide Nanostructures written by Junqiao Wu and published by Springer Science & Business Media. This book was released on 2011-09-22 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxides and particularly their nanostructures have emerged as animportant class of materials with a rich spectrum of properties and greatpotential for device applications. In this book, contributions from leadingexperts emphasize basic physical properties, synthesis and processing, and thelatest applications in such areas as energy, catalysis and data storage. Functional Metal Oxide Nanostructuresis an essential reference for any materials scientist or engineer with aninterest in metal oxides, and particularly in recent progress in defectphysics, strain effects, solution-based synthesis, ionic conduction, and theirapplications.
Download or read book Resistive Switching written by Daniele Ielmini and published by John Wiley & Sons. This book was released on 2015-12-23 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its comprehensive coverage, this reference introduces readers to the wide topic of resistance switching, providing the knowledge, tools, and methods needed to understand, characterize and apply resistive switching memories. Starting with those materials that display resistive switching behavior, the book explains the basics of resistive switching as well as switching mechanisms and models. An in-depth discussion of memory reliability is followed by chapters on memory cell structures and architectures, while a section on logic gates rounds off the text. An invaluable self-contained book for materials scientists, electrical engineers and physicists dealing with memory research and development.
Download or read book HRTEM Study on Resistive Switching ZrO2 Thin Films and Their Micro Fabricated Thin Films written by Ying Li and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: For the next-generation nonvolatile memory material, the most promising candidate is resistive random access memory (RRAM) which is nonvolatile memory with high density, high speed, and low power consumption. Resistive switching (RS) behavior had been reported in various films including transition metal oxides, perovskite, and chalcogenide. For further application, it is still a challenge to fabricate nanostructures of RS material. Micro-fabrication method involves traditional lithography, chemical etching, electron beam direct writing, nano-imprint, and so on. However, the procedure and the cost of these methods are relatively complex and high for semiconductors process. In this chapter, we demonstrate a method for fabricating sub-micro ZrO2 lattice by using sol-gel method combined with laser interference lithography and micro-analysis with high-resolution transmission electron microscopy (HRTEM).
Download or read book Emerging Resistive Switching Memories written by Jianyong Ouyang and published by Springer. This book was released on 2016-07-04 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief describes how non-volatile change of the resistance , due to the application of electric voltage allows for fabrication of novel digital memory devices. The author explains the physics of the devices and provides a concrete description of the materials involved as well as the fundamental properties of the technology. He details how charge trapping, charge transfer and conductive filament formation effect resistive switching memory devices.
Download or read book Semiconductor Nanotechnology written by Stephen M. Goodnick and published by Springer. This book was released on 2018-07-26 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents research dedicated to solving scientific and technological problems in many areas of electronics, photonics and renewable energy. Energy and information are interconnected and are essential elements for the development of human society. Transmission, processing and storage of information requires energy consumption, while the efficient use and access to new energy sources requires new information (ideas and expertise) and the design of novel systems such as photovoltaic devices, fuel cells and batteries. Semiconductor physics creates the knowledge base for the development of information (computers, cell phones, etc.) and energy (photovoltaic) technologies. The exchange of ideas and expertise between these two technologies is critical and expands beyond semiconductors. Continued progress in information and renewable energy technologies requires miniaturization of devices and reduction of costs, energy and material consumption. The latest generation of electronic devices is now approaching nanometer scale dimensions, new materials are being introduced into electronics manufacturing at an unprecedented rate, and alternative technologies to mainstream CMOS are evolving. Nanotechnology is widely accepted as a source of potential solutions in securing future progress for information and energy technologies. Semiconductor Nanotechnology features chapters that cover the following areas: atomic scale materials design, bio- and molecular electronics, high frequency electronics, fabrication of nanodevices, magnetic materials and spintronics, materials and processes for integrated and subwave optoelectronics, nanoCMOS, new materials for FETs and other devices, nanoelectronics system architecture, nano optics and lasers, non-silicon materials and devices, chemical and biosensors, quantum effects in devices, nano science and technology applications in the development of novel solar energy devices, and fuel cells and batteries.
Download or read book Low Dimensional Nanoelectronic Devices written by Angsuman Sarkar and published by CRC Press. This book was released on 2022-10-27 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing cutting-edge research on nanoelectronics and photonic devices and its application in future integrated circuits, this state-of-the-art book tackles the challenges of the different detailed theoretical and analytical models of solving the problems of various nanodevices. The volume also explores from different angles the roles of material composition and choice of materials that now play the most critical role in determining outcomes of low-dimensional nanoelectronic devices. The applications of those findings are extremely beneficial for the computing and telecommunication industries. Beginning with a solid theoretical background for every chapter, this volume covers the hottest areas of present-day electronic engineering. The continuous miniaturization of devices, components, and systems requires corresponding cutting-edge theoretical analysis supported by simulated findings before actual fabrication. That purpose is given maximum focus in this volume, which has interdisciplinary appeal, making it a comprehensive technological volume that deals with underlying aspects of physics, materials, structures in nano-regime, and the corresponding end-product in the form of devices.
Download or read book Dielectrics for Nanosystems 4 Materials Science Processing Reliability and Manufacturing written by Electrochemical society. Meeting and published by The Electrochemical Society. This book was released on 2010 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Solution Synthesis for Materials Design and Thin Film Device Applications written by Soumen Das and published by Elsevier. This book was released on 2021-01-09 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Solution Synthesis for Materials Design and Thin Film Device Applications presents current research on wet chemical techniques for thin-film based devices. Sections cover the quality of thin films, types of common films used in devices, various thermodynamic properties, thin film patterning, device configuration and applications. As a whole, these topics create a roadmap for developing new materials and incorporating the results in device fabrication. This book is suitable for graduate, undergraduate, doctoral students, and researchers looking for quick guidance on material synthesis and device fabrication through wet chemical routes. Provides the different wet chemical routes for materials synthesis, along with the most relevant thin film structured materials for device applications Discusses patterning and solution processing of inorganic thin films, along with solvent-based processing techniques Includes an overview of key processes and methods in thin film synthesis, processing and device fabrication, such as nucleation, lithography and solution processing
Download or read book Advanced Memory Technology written by Ye Zhou and published by Royal Society of Chemistry. This book was released on 2023-10-09 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced memory technologies are impacting the information era, representing a vibrant research area of huge interest in the electronics industry. The demand for data storage, computing performance and energy efficiency is increasing exponentially and will exceed the capabilities of current information technologies. Alternatives to traditional silicon technology and novel memory principles are expected to meet the need of modern data-intensive applications such as “big data” and artificial intelligence (AI). Functional materials or methodologies may find a key role in building novel, high speed and low power consumption computing and data storage systems. This book covers functional materials and devices in the data storage areas, alongside electronic devices with new possibilities for future computing, from neuromorphic next generation AI to in-memory computing. Summarizing different memory materials and devices to emphasize the future applications, graduate students and researchers can systematically learn and understand the design, materials characteristics, device operation principles, specialized device applications and mechanisms of the latest reported memory materials and devices.
Download or read book Silicon Nitride Silicon Dioxide and Emerging Dielectrics 9 written by Ram Ekwal Sah and published by The Electrochemical Society. This book was released on 2007 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions contains the papers presented in the symposium on Silicon Nitride, Silicon Dioxide Thin Insulating Films, and Emerging Dielectics held May 6-11, 2007 in Chicago. Papers were presented on deposition, characterization and applications of the dielectrics including high- and low-k dielectrics, as well as interface states, device characterization, reliabiliy and modeling.