Download or read book Earthquake Resistant Structures written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2013-03-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering
Download or read book Earthquake Resistant Concrete Structures written by Andreas Kappos and published by CRC Press. This book was released on 2014-04-21 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces practising engineers and post-graduate students to modern approaches to seismic design, with a particular focus on reinforced concrete structures, earthquake resistant design of new buildings and assessment, repair and strengthening of existing buildings.
Download or read book Analysis Procedure for Earthquake Resistant Structures written by Farzad Hejazi and published by Springer. This book was released on 2018-05-15 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis procedure for structures that are exposed to the lateral loads such as earthquake and wind. It includes the process for calculating and distributing the effective load into structural elements, as well as for calculating the displacements for different types of structures, e.g. reinforced concrete and steel framed structures. The book provides civil engineers with clear guidelines on how to perform seismic analysis for various building systems, and how to distribute the lateral load to the structural components. This book consists of 4 chapters: The first chapter offers an introduction, while Chapter 2 discusses moment resistance frame. The final two chapters explore shear wall frames and brace frames respectively. Each chapter follows the same structure, explaining step by step all the necessary algorithms, equations and procedures for calculating 1) loads, 2) the centre of mass, 3) stiffness of structures, 4) centre of stiffness, 5) lateral loading, 6) the distribution of lateral loads, and 7) the lateral displacement. Demonstrating the implementation of real building analysis, the book provides architectural drawings and structural plans at the beginning of each chapter.
Download or read book EARTHQUAKE RESISTANT DESIGN OF STRUCTURES written by PANKAJ AGRAWAL and published by PHI Learning Pvt. Ltd.. This book was released on 2006-01-01 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and well-organized book presents the concepts and principles of earthquake resistant design of structures in an easy-to-read style. The use of these principles helps in the implementation of seismic design practice. The book adopts a step-by-step approach, starting from the fundamentals of structural dynamics to application of seismic codes in analysis and design of structures. The text also focusses on seismic evaluation and retrofitting of reinforced concrete and masonry buildings. The text has been enriched with a large number of diagrams and solved problems to reinforce the understanding of the concepts. Intended mainly as a text for undergraduate and postgraduate students of civil engineering, this text would also be of considerable benefit to practising engineers, architects, field engineers and teachers in the field of earthquake resistant design of structures.
Download or read book Blast Resistant Structures written by and published by . This book was released on 1986 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Fatigue and Fracture Resistant Structures written by and published by ASTM International. This book was released on 1980 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automated Design of Damage Resistant Structures Theory and application written by Ronald F. Taylor and published by . This book was released on 1982 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosion Resistant Buildings written by M. Y. H. Bangash and published by Springer Science & Business Media. This book was released on 2005-12-16 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent book highlights all aspects of the analysis and design of buildings subject to impact, explosion and fire. It is a definitive reference book and contains 10 chapters from a wide international prospective. Three-dimensional finite element and discrete element techniques are included. They are applied to buildings such as the World Trade Center (WTC Twin Towers) and the Federal Building in Oklahoma on the basis of the designers drawings, data and other information. Many small case studies are also included. The book has a comprehensive bibliography and a large appendix providing background analysis and computer subroutines of recently developed programs.
Download or read book Earthquake Resistant Engineering Structures III written by C. A. Brebbia and published by WIT Press (UK). This book was released on 2001 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Third International Conference on Earthquake Resistant and Engineering Structures, ERES III"--P. facing t.p.
Download or read book Resistant Structures written by Richard Strier and published by Univ of California Press. This book was released on 2023-09-01 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking Wittgenstein's "Don't think, but look" as his motto, Richard Strier argues against the application of a priori schemes to Renaissance (and all) texts. He argues for the possibility and desirability of rigorously attentive but "pre-theoretical" reading. His approach privileges particularity and attempts to respect the "resistant structures" of texts. He opposes theories, critical and historical, that dictate in advance what texts must—or cannot—say or do. The first part of the book, "Against Schemes," demonstrates, in discussions of Rosemond Tuve, Stephen Greenblatt, and Stanley Fish among others, how both historicist and purely theoretical approaches can equally produce distortion of particulars. The second part, "Against Received Ideas," shows how a variety of texts (by Shakespeare, Donne, Herbert, and others) have been seen through the lenses of fixed, mainly conservative ideas in ways that have obscured their actual, surprising, and sometimes surprisingly radical content.
Download or read book Earthquake Resistant Design of Structures written by Shashikant K. Duggal and published by OUP India. This book was released on 2013-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-resistant Design of Structures 2e is designed for undergraduate students of civil engineering.
Download or read book Seismic Isolation for Earthquake resistant Structures written by Petros Ioannis Komodromos and published by Advances in Earthquake Enginee. This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground motion due to earthquake excitation often induces disastrous disturbances that severely damage structures and their contents. Conventional earthquake-resistant design focuses on the strengthening of structures to avoid collapse, while little attention is paid to the prevention of damage as it is almost impossible to construct completely earthquake proof structures at reasonable cost. This state-of-the-art volume explores seismic isolation as an alternative and performance-based design approach to minimise earthquake induced loads and resulting damage in low to medium-rise buildings. A discussion of the characteristics, advantages and limitations of seismic isolation is followed by a demonstration of its capability to decouple a structure from the damaging effects of ground acceleration. Describes currently used seismic isolation systems in detail. Evaluates the performance of seismically isolated structures and provides examples of their response under earthquake action. Proposes a preliminary design methodology for seismically isolated structures. Accessible to both students and practising structural engineers who need to familiarise themselves with this approach.
Download or read book Ductility of Seismic Resistant Steel Structures written by Victor Gioncu and published by CRC Press. This book was released on 2003-09-02 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a state-of-the-art report on the ductility of steel structures, containing a comprehensive review of the technical literature available, and presenting the results of the authors' own extensive research activities in this area. Analytical and numerical methods are described, and a wealth of practical information is provided. Ductility of Seismic-Resistant Steel Structures will be of great use to advanced students, researchers, designers and professionals in the field of civil, structural and earthquake engineering.
Download or read book Earthquake Resistant Engineering Structures X written by C.A. Brebbia and published by WIT Press. This book was released on 2015-09-15 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the latest research on preparation for and mitigation of future earthquakes, this book addresses an area of increasing importance to many areas around the world. It contains research presented at the ninth and latest in a series of biennial conferences on the topic organised by the Wessex Institute. As world population has concentrated in urban areas, we have seen the consequences of natural disasters take an ever higher toll in human life and property. Adding to this trend, earthquake activity is being registered in areas that were not previously very active, thus the need for research into the application of technological advances to the specific area of earthquake engineering. This volume presents those advances. The papers cover Seismic Isolation and Energy Dissipation; Building Performance During Earthquakes; Nonlinear Numerical Analysis; Performance Based Design; Experimental Studies; Seismic Hazard Evaluation and Microzoning for Structural Design; Seismic Hazard Assessment; Case Studies.
Download or read book RC Structures Strengthened with FRP for Earthquake Resistance written by Shamsher Bahadur Singh and published by Springer Nature. This book was released on with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Earthquake Resistant Structures written by Emilio Rosenblueth and published by . This book was released on 1980 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Resilience A Comprehensive Approach to Disaster Proof Structures written by Charles Nehme and published by Charles Nehme. This book was released on with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an era of increasing climate change and natural disasters, the need for resilient structures has never been more urgent. The devastating impacts of earthquakes, hurricanes, floods, and wildfires have highlighted the vulnerability of our built environment and the critical importance of designing and constructing structures that can withstand these threats. This book aims to provide a comprehensive overview of disaster resilience, exploring the principles, techniques, and technologies that can be employed to create structures that are both safe and sustainable. From seismic design to wind engineering, flood protection to fire safety, this book covers a wide range of topics that are essential for understanding and implementing disaster-resilient practices. The book is organized into several chapters, each focusing on a specific aspect of disaster resilience. The introduction provides a foundational understanding of the concept of disaster resilience and its importance. Subsequent chapters delve into structural design principles, construction materials and techniques, case studies, emerging trends, and policy and regulatory frameworks. By studying the information presented in this book, readers will gain a deeper understanding of the challenges and opportunities associated with building disaster-resilient structures. The knowledge and insights gained from this book can be applied by architects, engineers, planners, and policymakers to create more sustainable and resilient communities. I hope that this book will serve as a valuable resource for anyone interested in learning about disaster resilience and its implications for the built environment.
