Download or read book Resin Transfer Moulding written by K. Potter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resin Transfer Moulding provides readers with the information needed to design, develop and manufacture high components via an RTM route and provides a framework which readers can use to place their endeavours within an industrial context. Readers are presented with information to give them an understanding of the scientific and theoretical background to RTM, thereby giving them an understanding of the major constraints on the process. This background is then built on by an in-depth consideration of the technological details that are required to utilise the process effectively. To achieve all this the book presents detailed sections on all the essential topics in RTM finishing with a case study. Resin Transfer Moulding simplifies the introduction of RTM technology into organizations wishing to benefit from the opportunities it brings, by gathering together all the necessary information in a single volume.
Download or read book Resin Transfer Moulding for Aerospace Structures written by T. Kruckenberg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resin Transfer Moulding and other similar 'liquid moulding' manufacturing methods have been used to make non-structural composites for the last 35 years. However, in the last eight years these methods have become the subject of enormous interest by aerospace manufacturing companies. Resin Transfer Moulding for Aerospace Structures describes all aspects of Resin Transfer Moulding (RTM) for aerospace structures. Written by an international team of experts, from both industry and academia, it is a comprehensive work providing complete and detailed information on the process of RTM from theoretical modelling to practical experience. With subjects including manufacturing, tooling, fabric design and flow modelling all covered, this book is an invaluable up-to-the-minute reference source which provides the reader with a good understanding of RTM and its possible uses, especially for high performance applications. Resin Transfer Moulding for Aerospace Structures is an ideal guide for those in the aerospace and related industries, who want to understand and utilize RTM, as well as those directly involved in the RTM industry.
Download or read book Composites and Advanced Materials for Industrial Applications written by Kumar, K. and published by IGI Global. This book was released on 2018-05-25 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase their applications across different industries. Composites and Advanced Materials for Industrial Applications is a critical scholarly resource that examines recent advances in the field of application of composite materials. Featuring coverage on a broad range of topics such as nanocomposites, hybrid composites, and fabrication techniques, this book is a vital reference source for engineers, academics, researchers, students, professionals, and practitioners seeking current research on improvements in manufacturing processes and developments of new analytical and testing methods.
Download or read book Liquid Moulding Technologies written by C D Rudd and published by Elsevier. This book was released on 1997-01-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid moulding technologies such as RTM and SRIM are increasingly used for manufacturing composites in a variety of industries. Most interest stems from the automotive industry in the continuing search for weight savings, manufacturing economies and vehicle refinement. Liquid Moulding Technologies provides a unique insight into the development and use of such processes with a comprehensive description of the material, process variants, equipment, control strategies and tooling techniques used. Procedures for materials characterisation, preform and mould design are also described and the text is augmented by a number of case studies for prototype and production parts. This book is an invaluable source for both industrial moulders and those working in research and development.
Download or read book Manufacturing Techniques for Polymer Matrix Composites PMCs written by Suresh G Advani and published by Elsevier. This book was released on 2012-07-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are used extensively across a wide range of industries, making the design and development of effective manufacturing processes of great importance. Manufacturing techniques for polymer matrix composites (PMCs) provides an authoritative review of the different technologies employed in the manufacture of this class of composite. Following an introduction to composites and manufacturing processes, part one reviews the manufacturing of short fiber and nanoparticle based polymer matrix composites, with injection and compression molding examined in depth. Thermoplastic processing is the focus of part two. Sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles are investigated. Part three reviews thermoset processing. A survey of resin transfer molding follows, including vacuum-assisted and compression resin transfer molding. The pultrusion process is then considered, before the book concludes with an investigation into autoclave and out-of-autoclave curing processes in polymer matrix composites. With its distinguished editors and international team of expert contributors, Manufacturing techniques for polymer matrix composites (PMCs) is an essential guide for engineers and scientists working in the field of polymer matrix composites. Provides an authoritative review of the different technologies employed in the manufacture of polymer matrix composites Reviews the manufacturing of short fiber and nanoparticle-based polymer matrix composites, with injection and compression molding examined in depth Examines thermoplastic processing, sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles
Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers
Download or read book Resin Transfer Molding written by William P. Benjamin and published by Society for the Advancement of Material & Process Engineering. This book was released on 1999 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resin Transfer Molding RTM written by Wayne Becker and published by . This book was released on 1991 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of Process Knowledge into Design Support Systems written by Hubert Kals and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design is a fundamental creative human activity. This certainly applies to the design of artefacts, the realisation of which has to meet many constraints and ever raising criteria. The world in which we live today, is enormously influenced by the human race. Over the last century, these artefacts have dramatically changed the living conditions of humans. The present wealth in very large parts of the world, depends on it. All the ideas for better and new artefacts brought forward by humans have gone through the minds of designers, who have turned them into feasible concepts and subsequently transformed them into realistic product models. The designers have been, still are, and will remain the leading 'change agents' in the physical world. Manufacturability of artefacts has always played a significant role in design. In pre industrial manufacturing, the blacksmith held the many design and realisation aspects of a product in one hand. The synthesis of the design and manufacturing aspects took, almost implicitly, place in the head of the man. All the knowledge and the skills were stored in one person. Education and training took place along the line of many years of apprenticeship. When the production volumes increased, -'assembling to measure' was no longer tolerated and production efficiency became essential - design, process planning, production planning and fabrication became separated concerns. The designers created their own world, separated from the production world. They argued that restrictions in the freedom of designing would badly influence their creativity in design.
Download or read book Process Modeling in Composites Manufacturing written by Suresh G. Advani and published by CRC Press. This book was released on 2010-07-14 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a wealth of literature on modeling and simulation of polymer composite manufacturing processes. However, existing books neglect to provide a systematic explanation of how to formulate and apply science-based models in polymer composite manufacturing processes. Process Modeling in Composites Manufacturing, Second Edition provides tangible m
Download or read book Resin Transfer Moulding written by Kevin Potter and published by . This book was released on 1997 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Composites for Lightweight Applications written by Hom Dhakal and published by Woodhead Publishing. This book was released on 2020-11-22 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon and glass fibre reinforced composite materials have been used for many years in several different types of applications. However, these conventional composites are derived from non-renewable reinforcements and they pose a significant threat to the environment. Government legislation and consumer behaviour have recently forced many industries to adapt sustainable composites. Industries such as automotive, marine and aerospace are now seeking sustainable lightweight composites with the aim to reduce the overall weight of the components with enhanced materials and design aspects. Therefore, there is high demand on research for the development of sustainable lightweight composites. This book presents a comprehensive review of lightweight composites with the central aim to increase their use in key industrial sectors such as automotive, marine and aerospace. There is no such book currently available that is dedicated to sustainable lightweight applications covering important topics such as key drivers for lightweight composites, mechanical properties, damage characterisation, durability and environmental aspects. Key topics that are addressed include: The roles of reinforcements and matrices in composite materials Sustainable natural fibre reinforcements and their morphological structures Lightweight applications and properties requirements Design, manufacturing processes and their effects on properties Testing and damage characterisation of composite materials Sustainable composites and techniques for property enhancement Future trends and challenges for sustainable composites in lightweight applications It will be a valuable reference resource for those working in material Science, polymer science, materials engineering, and industries involved in the manufacture of automotive and aerospace components from lightweight composite materials. Provides a comprehensive review of sustainable lightweight composites looking at key industrial applications such as automotive, marine, and aerospace and construction Important relationships between structure and properties are analysed in detail Enhancement of properties through hybrid systems, are also explored with emphasis on design, materials selection and manufacturing techniques
Download or read book Unsaturated Polyester Resins written by Sabu Thomas and published by Elsevier. This book was released on 2019-07-11 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication, and Applications explains the preparation, techniques and applications relating to the use of unsaturated polyester resin systems for blends, interpenetrating polymer networks (IPNs), gels, composites and nanocomposites, enabling readers to understand and utilize the improved material properties that UPRs facilitate. Chapters cover unsaturated polyester resins and their interaction at the macro, micro and nano levels, in-depth studies on the properties and analysis of UPR based materials, and the applications of UPR based composites, blends, IPNs and gels across a range of advanced commercial and industrial fields. This is a highly detailed source of information on unsaturated polyester resins, supporting academics, researchers and postgraduate students working with UPRs, polyesters, polymeric or composite materials, polymer chemistry, polymer physics, and materials science, as well as scientists, R&D professionals and engineers in industry. Covers the use of unsaturated polyester resin systems for blends, IPNs, gels, composites and nanocomposites Presents cutting-edge techniques for the analysis and improvement of properties of advanced UPR-based materials Unlocks the potential of unsaturated polyester resins in high-performance materials for a range of advanced applications
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Commercial Aircraft Composite Technology written by Ulf Paul Breuer and published by Springer. This book was released on 2016-05-10 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on lectures held at the faculty of mechanical engineering at the Technical University of Kaiserslautern. The focus is on the central theme of societies overall aircraft requirements to specific material requirements and highlights the most important advantages and challenges of carbon fiber reinforced plastics (CFRP) compared to conventional materials. As it is fundamental to decide on the right material at the right place early on the main activities and milestones of the development and certification process and the systematic of defining clear requirements are discussed. The process of material qualification - verifying material requirements is explained in detail. All state-of-the-art composite manufacturing technologies are described, including changes and complemented by examples, and their improvement potential for future applications is discussed. Tangible case studies of high lift and wing structures emphasize the specific advantages and challenges of composite technology. Finally, latest R&D results are discussed, providing possible future solutions for key challenges such as low cost high performance materials, electrical function integration and morphing structures.
Download or read book Liquid Composite Molding written by Richard S. Parnas and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2014-11-06 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid composite molding is a family of versatile methods to manufacture composite materials in the automotive, aerospace, railroad, marine, and defense industries. This well integrated text offers engineering students and industrial practitioners an expertly organized guide to the engineering principles and manufacturing issues critical to successful molding operations. Liquid Composite Molding is an interdisciplinary treatment of transport phenomena in porous media, textile and automation technology to construct the porous reinforcement, and computer aided engineering for design optimization. The included CD ROM contains a permeability database and a finite element flow simulator for process design. Problems at the end of each chapter expand and clarify the most important topics.
Download or read book Molding Simulation Theory and Practice written by Maw-Ling Wang and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2018-06-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical introductory guide to injection molding simulation is aimed at both practicing engineers and students. It will help the reader to innovate and improve part design and molding processes, essential for efficient manufacturing. A user-friendly, case-study-based approach is applied, enhanced by many illustrations in full color. The book is conceptually divided into three parts: Chapters 1–5 introduce the fundamentals of injection molding, focusing the factors governing molding quality and how molding simulation methodology is developed. As they are essential to molding quality, the rheological, thermodynamic, thermal, mechanical, kinetic properties of plastics are fully elaborated in this part, as well as curing kinetics for thermoset plastics. Chapters 6–11 introduce CAE verification of design, a valuable tool for both part and mold designers toward avoiding molding problems in the design stage and to solve issues encountered in injection molding. This part covers design guidelines of part, gating, runner, and cooling channel systems. Temperature control in hot runner systems, prediction and control of warpage, and fiber orientation are also discussed. Chapters 12–17 introduce research and development in innovative molding, illustrating how CAE is applied to advanced molding techniques, including co-/bi-Injection molding, gas-/water-assisted injection molding, foam injection molding, powder injection molding, resin transfer molding, and integrated circuit packaging. The authors come from the creative simulation team at CoreTech System (Moldex3D), winner of the PPS James L. White Innovation Award 2015. Several CAE case study exercises for execution in the Moldex3D software are included to allow readers to practice what they have learned and test their understanding.
