Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.

Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.

Download or read book Materials for the Direct Restoration of Teeth written by John Nicholson and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for the Direct Restoration of Teeth focuses on the important role teeth play in our lives and how biomaterials scientists are ensuring that new dental materials are functional and esthetic. As research in the field is shifting away from traditional materials like metal, and towards more advanced materials, such as resins and ceramics, this book on the subject of modern materials for the direct repair of teeth provides readers with a comprehensive reference. The most pertinent modern dental materials and their properties and applications for the direct restoration of teeth are presented, along with case examples and guidance notes making this book an essential companion for materials scientists and clinicians. - Provides comprehensive coverage of conventional and modern materials for direct restoration of teeth - Includes guidance notes and case examples to support dental clinicians in decision-making - Authored by a scientist and a clinician, the book provides a balanced and complete treatise of the subject

Download or read book Craig s Restorative Dental Materials written by John M. Powers and published by Mosby. This book was released on 2006 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive exploration of restorative dental materials, this book provides the information readers need to know to correctly use dental materials in the clinic and dental laboratory. Ranging from fundamental concepts to advanced skills, it also provides the scientific basis for technical procedures and manipulation of materials.

Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.

Download or read book Phillips Science of Dental Materials written by Kenneth J. Anusavice, DMD, PhD and published by Elsevier Health Sciences. This book was released on 2012-09-27 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the most up-to-date information on materials used in the dental office and laboratory today. Emphasizing practical, clinical use, as well as the physical, chemical, and biological properties of materials, this leading reference helps you stay current in this very important area of dentistry. This new full-color edition also features an extensive collection of new clinical photographs to better illustrate the topics and concepts discussed in each chapter. Organization of chapters and content into four parts (General Classes and Properties of Dental Materials; Auxiliary Dental Materials; Direct Restorative Materials; and Indirect Restorative Materials) presents the material in a logical and effective way for better comprehension and readability. Balance between materials science and manipulation bridges the gap of knowledge between dentists and lab technicians. Major emphasis on biocompatibility serves as a useful guide for clinicians and educators on material safety. Distinguished contributor pool lends credibility and experience to each topic discussed. Critical thinking questions appearing in boxes throughout each chapter stimulate thinking and encourage classroom discussion of key concepts and principles. Key terms presented at the beginning of each chapter helps familiarize readers with key terms so you may better comprehend text material. NEW! Full color illustrations and line art throughout the book make text material more clear and vivid. NEW! Chapter on Emerging Technologies keeps you up to date on the latest materials in use. NEW! Larger trim size allows the text to have fewer pages and makes the content easier to read.

Download or read book Tooth colored Restoratives written by Harry F. Albers and published by PMPH-USA. This book was released on 2002 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the nature, benefits, and limitations of resins and ionomers. Products are classified by material type and clarified as to their use. Text is supported by more than 700 dentists' involvement in study group evaluations of techniques and results. CD-ROM includes complete text and illustrations in fully searchable PDF files. Previous edition: c1998.

Download or read book Radiation Curing in Polymer Science and Technology Photoinitiating systems written by Jean-Pierre Fouassier and published by Elsevier Science & Technology. This book was released on 1993 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this four-volume, multi-author reference work is to provide a comprehensive guide to the radiation curing field. Volume Two is devoted to the chemistry of photoinitiators, presenting and discussing basic concepts and the reactivity of typical systems.

Download or read book Biocompatibility of Dental Materials written by Gottfried Schmalz and published by Springer Science & Business Media. This book was released on 2008-10-10 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and scientifically based overview of the biocompatibility of dental materials. Up-to-date concepts of biocompatibility assessment are presented, as well as information on almost all material groups used in daily dentistry practice. Furthermore, special topics of clinical relevance (e.g,, environmental and occupational hazards and the diagnosis of adverse effects) are covered. The book will: improve the reader’s ability to critically analyze information provided by manufacturers supply a better understanding of the biocompatibility of single material groups, which will help the reader choose the most appropriate materials for any given patient and thus prevent adverse effects from developing provide insights on how to conduct objective, matter-of-fact discussions with patients about the materials to be used in dental procedures advise readers, through the use of well-documented concepts, on how to treat patients who claim adverse effects from dental materials feature clinical photographs that will serve as a reference when analyzing clinical symptoms, such as oral mucosa reactions.

Download or read book Dental Composites written by Frederick C. Calhoun and published by Nova Science Pub Incorporated. This book was released on 2011 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dental composite resins are types of synthetic resins which are used in dentistry as restorative material or adhesives. Synthetic resins evolved as restorative materials since they were insoluble, aesthetic, and insensitive to dehydration and were inexpensive. It is easy to manipulate them as well. This book presents current research in the study of dental composites, including dental composites with nano-scaled fillers; the mechanical properties of resin composite core materials; the design and development of novel urethane dimethacrylate monomers in dental compositions; and the development of low-shrinkage dental composites.

Download or read book Applied Dental Materials written by John F. McCabe and published by Wiley-Blackwell. This book was released on 1990 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developing Bioactive Materials for Dental Applications written by Mary Anne Sampaio Melo and published by Frontiers Media SA. This book was released on 2021-10-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Nanocomposite Materials in Dentistry written by Abdullah M. Asiri and published by Woodhead Publishing. This book was released on 2018-11-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Nanocomposite Materials in Dentistry presents the study and developments of nano-composite materials for dental applications. Special emphasis is given to the issues related to dental bone regeneration using various types of nano-composite materials, issues of dental failure, antibacterial properties and dental implants. Topics are systematically arranged so that layman can also understand the fundamentals and applications of dental nanocomposites. The book offers a powerful source of exploration on the preparation, characteristics and specific uses of composites in the fields of applied chemistry and medical sciences. - Offers an historical overview of composites materials and their dentistry applications - Outlines the role of nanocomposites and nanotechnology in dentistry - Discusses the properties of nanocomposites for dental grafting, implants and bone tissues

Download or read book Designing Bioactive Polymeric Materials For Restorative Dentistry written by Mary Anne Sampaio de Melo and published by CRC Press. This book was released on 2020-11-26 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Restorative biomaterials in dentistry are designed to restore the shape and function of teeth. Their applicability is related to restorative procedures such as dental restorations, dentures, dental implants, and endodontic materials. Designing Bioactive Polymeric Materials for Restorative Dentistry reviews the current state of the art for restorative biomaterials and discusses the near-future trends in this field. The book examines the biomaterials utilized in restorative dental applications (bonding, composites, cements, and ceramics) and assesses the design for these materials and the role of nanotechnology. All of the contributors are active clinical dentists and researchers in this field. FEATURES Overviews the major ongoing research efforts on developing bioactive bonding systems and composites in dental biomaterials Focuses on emerging trends in restorative dental biomaterials Incorporates evidence-based data on new restorative dental materials throughout the book Features extensive references at the end of each chapter to enhance further study Mary Anne S. Melo, DDS, MSc, PhD FADM, is an Associate Professor and Division Director of Operative Dentistry at the School of Dentistry, University of Maryland, Baltimore, Maryland.

Download or read book Contemporary Esthetic Dentistry written by George A. Freedman and published by Elsevier Health Sciences. This book was released on 2011-12-13 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both popular and advanced cosmetic procedures, Contemporary Esthetic Dentistry enhances your skills in the dental treatments leading to esthetically pleasing restorations. With over 1,600 full-color illustrations, this definitive reference discusses the importance of cariology and caries management, then covers essential topics such as ultraconservative dentistry, color and shade, adhesive techniques, anterior and posterior direct composites, and finishing and polishing. Popular esthetic treatment options are described in detail, including bleaching or tooth whitening, direct and porcelain veneers, and esthetic inlays and onlays. Coverage of advanced cosmetic procedures includes implants, perioesthethics, ortho-esthetics, and pediatric esthetics, providing a solid understanding of treatments that are less common but can impact patient outcomes. Developed by Dr. George A. Freedman, a renowned leader in the field, Contemporary Esthetic Dentistry also allows you to earn Continuing Education credits as you improve your knowledge and skills. - Continuing Education credits are available, allowing you to earn one to two CE credits per chapter. - Detailed coverage of popular esthetic procedures includes bleaching, direct and porcelain veneers, inlays and onlays, posts and cores, porcelain-fused-to-metal restorations, zirconium crowns and bridges, and complete dentures. - Coverage of advanced procedures includes implants, perioesthethics, ortho-esthetics, pediatric esthetics, and sleep-disordered breathing, providing a solid understanding of less-frequently encountered topics that impact the esthetic treatment plan and outcomes. - Coverage of key esthetic dentistry topics and fundamental skills includes cariology and caries management, understanding dental materials, photography, understanding and manipulating of color and shade, adhesive techniques, anterior and posterior direct composites, and finishing and polishing. - Over 1,600 full-color photos and illustrations help to clarify important concepts and techniques, and show treatments from beginning of the case to the final esthetic results. - Well-known and respected lead author George A. Freedman is a recognized author, educator, and speaker, and past president of the American Academy of Cosmetic Dentistry and co-founder of the Canadian Academy for Esthetic Dentistry. - Expert contributors are leading educators and practicing clinicians, including names such as Irvin Smigel (the father of esthetic dentistry), Chuck N. Maragos (the father of contemporary diagnostics), Wayne Halstrom (a pioneer in the area of dental sleep medicine), David Clark (one of the pioneers of the microscope in restorative dentistry and founder the Academy of Microscope Enhanced Dentistry), Edward Lynch (elected the most influential person in UK Dentistry in 2010 by his peers), Joseph Massad (creator, producer, director, and moderator of two of the most popular teaching videos on the subject of removable prosthodontics), Simon McDonald (founder and CEO of Triodent Ltd, an international dental manufacturing and innovations company), and many more!

Download or read book Dental Biomaterials written by R V Curtis and published by Elsevier. This book was released on 2014-01-23 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dental Biomaterials: Imaging, Testing and Modelling reviews the materials used in this important area, their performance and how such performance can be measured and optimised. Chapters review optical and electron microscopy imaging techniques for dental biomaterial interfaces. Specific materials such as dental cements, fibre-reinforced composites, metals and alloys are discussed. There is an analysis of stresses, fracture, wear and ageing in dental biomaterials as well as an evaluation of the performance of dental adhesives and resin-dentin bonds. Chapters also review ways of assessing the performance of dental handpieces, crowns, implants and prosthesies. The book also reviews the use of computer models in such areas as bond strength and shape optimisation of dental restorations.With its distinguished editors and team of experienced contributors DDental Biomaterials: Imaging, Testing and Modelling researchers, materials scientists, engineers and dental practitioners with an essential guide to the use and performance of dental biomaterials. - An essential guide to the use and performance of dental biomaterials - Reviews optical and electron microscopy imaging techniques for dental biomaterial interfaces - Analyses stresses, fracture, wear and ageing in dental biomaterials and evaluates the performance of dental adhesives and resin-dentin bonds

Download or read book Textbook of Operative Dentistry written by Nisha Garg and published by Boydell & Brewer Ltd. This book was released on 2010-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition is a complete guide to operative dentistry. Beginning with an introduction, physiology, dental caries and tooth preparation, the text also discusses pain and infection control. The following sections examine different operative procedures. New techniques such as minimal intervention dentistry, nanotechnology and lasers; and advances in dental materials are discussed in detail. More than 1200 colour images, illustrations, flow charts and tables are included. Key points Complete guide to operative dentistry Discusses numerous different procedures, and pain and infection control New techniques and advances in materials described in detail More than 1200 colour images, illustrations, flow charts and tables Previous edition published in 2010