Download or read book Residual Stresses and Nanoindentation Testing of Films and Coatings written by Haidou Wang and published by Springer. This book was released on 2018-03-12 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basic principles and application of nanoindentation technology to determine residual stresses in films and coatings. It briefly introduces various detection technologies for measuring residual stresses, while mainly focusing on nanoindentation. Subsequently, nanoindentation is used to determine residual stresses in different types of films and coatings, and to describe them in detail. This book is intended for specialists, engineers and graduate students in mechanical design, manufacturing, maintenance and remanufacturing, and as a guide to the practice of production with social and economic benefits.
Download or read book Residual Stresses and Nanoindentation Testing of Films and Coatings written by 王海斗 and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Films and Coatings written by Sam Zhang and published by CRC Press. This book was released on 2015-07-29 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Films and Coatings: Toughening and Toughness Characterization captures the latest developments in the toughening of hard coatings and in the measurement of the toughness of thin films and coatings. Featuring chapters contributed by experts from Australia, China, Czech Republic, Poland, Singapore, Spain, and the United Kingdom, this book: Presents the current status of hard-yet-tough ceramic coatings Reviews various toughness evaluation methods for films and hard coatings Explores the toughness and toughening mechanisms of porous thin films and laser-treated surfaces Examines adhesions of the film/substrate interface and the characterization of coating adhesion strength Discusses nanoindentation determination of fracture toughness, resistance to cracking, and sliding contact fracture phenomena Toughening and toughness measurement (of films and coatings) are two related, yet separate, fields of great importance in today’s nanotechnology world. Thin Films and Coatings: Toughening and Toughness Characterization is a timely reference written in such a way that novices will find it a stepping stone to the field and veterans will find it a rich source of information for their research.
Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.
Download or read book Nanoindentation written by Anthony C. Fischer-Cripps and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Nanoindentation includes a dedicated chapter on thin films, new material on dynamic analysis and creep, accounts of recent research, and three new appendices on nonlinear least squares fitting, frequently asked questions, and specifications for a nanoindentation instrument. Nanoindentation Second Edition is intended for those who are entering the field for the first time and to act as a reference for those already conversant with the technique.
Download or read book Thin Films and Coatings written by B. M. Caruta and published by Nova Publishers. This book was released on 2005 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broad field of thin film technology is based first of all on the film growth processes in general. The concepts of crystal structure and defects in crystalline thin films such as grain boundaries, dislocations and vacancies are examined. The general nature of film growth from atoms equilibrating with the service, through the initial stages of growth to film coalescence and zone models is also within the scope of this book as are evaporation, sputter deposition and chemical vapour deposition. Thin films are widely used in microelectronics, chemistry and a wide array of related fields. This book offers new research in this exploding field.
Download or read book Cathodic Arcs written by André Anders and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cathodic arcs are among the longest studied yet least understood objects in science. Plasma-generating, tiny spots appear on the cathode; they are highly dynamic and hard to control. With an approach emphasizing the fractal character of cathode spots, strongly fluctuating plasma properties are described such as the presence of multiply charged ions that move with supersonic velocity. Richly illustrated, the book also deals with practical issues, such as arc source construction, macroparticle removal, and the synthesis of dense, well adherent coatings. The book spans a bridge from plasma physics to coatings technology based on energetic condensation, appealing to scientists, practitioners and graduate students alike.
Download or read book Handbook of Mechanics of Materials written by Siegfried Schmauder and published by Springer. This book was released on 2019-05-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive reference for the studies of mechanical properties of materials over multiple length and time scales. The topics include nanomechanics, micromechanics, continuum mechanics, mechanical property measurements, and materials design. The handbook employs a consistent and systematic approach offering readers a user friendly reference ideal for frequent consultation. It is appropriate for an audience at of graduate students, faculties, researchers, and professionals in the fields of Materials Science, Mechanical Engineering, Civil Engineering, Engineering Mechanics, and Aerospace Engineering.
Download or read book Mechanical Testing of Materials written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2024-01-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and in-depth exploration of the most widely used test methods for characterizing the deformation and failure behavior of materials. It presents a thorough treatise on mechanical testing, providing a valuable resource for researchers, engineers, and students seeking to understand the mechanical properties and performance of materials across various applications. The book is organized into ten chapters dedicated to specific test methods including tensile, compression, bending, torsion, multiaxial, indentation, fracture, fatigue, creep, high strain rates, nondestructive evaluation, ensuring a thorough examination of each technique's principles, procedures, and applications. It features two special chapters focusing specifically on the mechanical characterization of concrete and fiber composite materials. These chapters delve into the unique aspects and challenges associated with testing and analyzing these specific materials.
Download or read book Experimental Mechanics written by Emmanuel E. Gdoutos and published by Springer Nature. This book was released on 2021-11-15 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents in a clear, simple, straightforward, novel and unified manner the most used methods of experimental mechanics of solids for the determination of displacements, strains and stresses. Emphasis is given on the principles of operation of the various methods, not in their applications to engineering problems. The book is divided into sixteen chapters which include strain gages, basic optics, geometric and interferometric moiré, optical methods (photoelasticity, interferometry, holography, caustics, speckle methods, digital image correlation), thermoelastic stress analysis, indentation, optical fibers, nondestructive testing, and residual stresses. The book will be used not only as a learning tool, but as a basis on which the researcher, the engineer, the experimentalist, the student can develop their new own ideas to promote research in experimental mechanics of solids.
Download or read book A Novel Pillar Indentation Splitting Test for Measuring Fracture Toughness of Thin Ceramic Coatings written by and published by . This book was released on 2014 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture toughness is an important material property that plays a role in determining the in-service mechanical performance and adhesion of thin ceramic films. Unfortunately, measuring thin film fracture toughness is affected by influences from the substrate and the large residual stresses that can exist in the films. In this paper, we explore a promising new technique that potentially overcomes these problems based on nanoindentation testing of micro-pillars produced by focused ion beam milling of the films. By making the pillar diameter approximately equal to its length, the residual stress in the pillar's upper portion is almost fully relaxed, and when indented with a sharp Berkovich indenter, the pillars fracture by splitting at reproducible loads that are readily quantified by a sudden displacement excursion in the load displacement behavior. Cohesive finite element simulations are used to analyze and develop, for a given material, a simple relation between the critical load at failure, pillar radius, and fracture toughness. The main novel aspect of this work is that neither crack geometries nor crack sizes need to be measured post test. Furthermore, the residual stress can be measured at the same time with toughness, by comparing the indentation results from the stress-free pillars and the as-deposited film. The method is tested on three different hard coatings formed by physical vapor deposition: titanium nitride, chromium nitride, and a CrAlN/Si3N4 nanocomposite. Results compare well to independently measured values of fracture toughness for the three brittle films. The technique offers several benefits over existing methods.
Download or read book Nanomechanical Analysis of High Performance Materials written by Atul Tiwari and published by Springer Science & Business Media. This book was released on 2013-08-13 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for researchers who are interested in investigating the nanomechanical properties of materials using advanced instrumentation techniques. The chapters of the book are written in an easy-to-follow format, just like solved examples. The book comprehensively covers a broad range of materials such as polymers, ceramics, hybrids, biomaterials, metal oxides, nanoparticles, minerals, carbon nanotubes and welded joints. Each chapter describes the application of techniques on the selected material and also mentions the methodology adopted for the extraction of information from the raw data. This is a unique book in which both equipment manufacturers and equipment users have contributed chapters. Novices will learn the techniques directly from the inventors and senior researchers will gain in-depth information on the new technologies that are suitable for advanced analysis. On the one hand, fundamental concepts that are needed to understand the nanomechanical behavior of materials is included in the introductory part of the book. On the other hand, dedicated chapters describe the utilization of advanced numerical modeling in understanding the properties of complex materials. This book is useful for students and researchers from diverse backgrounds including chemistry, physics, materials science & engineering, biotechnology and biomedical engineering. It is well suited as a textbook for students and as a reference book for researchers.
Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-08-18 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.
Download or read book Micro Process and Quality Control of Plasma Spraying written by Guozheng Ma and published by Springer Nature. This book was released on 2022-09-08 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the basic physical process and chemical reaction of plasma spraying particle melting, flight and deposition. It introduces the basic scientific contents such as the basic characteristics and spraying principle of plasma arc, the interaction between spraying particles in flight section and plasma jet, the spreading and solidification behavior of single droplet and the performance test of flat particles, macro performance evaluation and quality optimization of coating. The typical applications of plasma spraying coating and the new developing direction of plasma spraying technology are summarized. This book will be helpful for the graduate students, researchers, as well as engineers in the field of plasma spray.
Download or read book Handbook of Modern Coating Technologies written by Mahmood Aliofkhazraei and published by Elsevier. This book was released on 2021-03-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Modern Coating Technologies: Advanced Characterization Methods reviews advanced characterization methods of modern coating technologies. The topics in this volume consist of scanning vibrating electrode technique, spectroscopic ellipsometry, advances in X-ray diffraction, neutron reflectivity, micro- and nanoprobes, fluorescence technique, stress measurement methods in thin films, micropotentiometry, and localized corrosion studies.
Download or read book Polymer Surface Characterization written by Luigia Sabbatini and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-01-19 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated edition provides a broad approach to the surface analysis of polymers being of high technological interest. Modern analytical techniques, potential applications and recent advances in instrumental apparatus are discussed. The self-consistent chapters are devoted to techniques from photoelectron spectroscopy to electron microscopies and wettability.
Download or read book Metallurgical Coatings and Thin Films 1992 written by G.E. McGuire and published by Elsevier. This book was released on 2012-12-02 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the increasingly important requirements for high technology materials is that they possess near-surface properties different to their bulk properties. Specific surface properties are generally achieved through the use of these films or coatings or by modifying the structure or composition of the near surface. This two-volume work contains 157 papers covering a wide range of topics involving films, coatings, and modified surfaces. All aspects of the development of deposition technologies are addressed including basic research, applied research, applications development and full scale industrial production. The work will be of interest to materials scientists, physicists, electronic, chemical and mechanical engineers, and chemists.
