Download or read book Residual stress analysis in polymer materials using the hole drilling method basic principles and applications written by Arnaud Magnier and published by kassel university press GmbH. This book was released on 2018-12-17 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Beam Melting of Metastable Austenitic Stainless Steel written by Johannes Günther and published by BoD – Books on Demand. This book was released on 2020-01-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary focus of this work is the processing – microstructure – property correlation of EBM manufactured high-alloyed austenitic CrMnNi stainless steel. Independent of the applied process parameters, to this point this alloy exhibits a fine-grained and weak textured microstructure in the as-built state upon EBM processing. As detailed in the literature review, this is opposite to numerous alloys like the benchmark AISI 316L stainless steel, which are commonly characterized by epitaxial growth of columnar grains elongated parallel to building direction. A theory for this unusual observation is presented based on a grain refinement due the process-inherent cyclic heat-treatment, i.e. repetitive reheating and partial melting of the consolidated material due to the energy input during melting of subsequent layers and resulting solid-liquid as well as solid-solid (ferritic bcc to austenitic fcc phase and vice versa) phase transformations. A calculation of the phase diagram, differential thermal II Abstract analysis and the investigation of the uppermost layers of bulky and thin-walled EBM processed structures are conducted to support this assumption. Moreover, the CrMnNi stainless steel specimens are characterized by an outstanding damage tolerance, which is demonstrated by tensile testing and examination of the fracture surfaces revealing large lack-of-fusion defects due to unsuitable process parameters. Combined EBSD and X-ray diffraction analysis attribute the high damage tolerance to a pronounced strain hardening and mitigation of the effect of defects due to the transformation-induced plasticity (TRIP) effect. The deformation-induced martensitic transformation and associated strain hardening has also been correlated to a considerable low-cycle fatigue performance even under the presence of large inhomogeneities. The chemical composition of the alloy upon EBM processing is strongly dependent on the process parameters, i.e. it is demonstrated that the evaporation rate of Mn varies with the scan strategy and volumetric energy density. This phenomenon is utilized for the fabrication of homogeneous specimens with different Mn concentrations and resulting mechanical properties.These findings are subsequently employed for a prove-of-concept of the possibility to produce functionally graded material by a spatial adjustment of the scan strategy throughout the layer-wise built-up of objects. This is a novel approach for the synthetization of functionally graded materials based on the processing of one homogenous precursor powder feedstock. In summary, the particular CrMnNi stainless steel is introduced as a novel alloy design for AM because it addresses current material-related issues inherent in layer-wise technologies and potentially further contributes to the exploitation of the full potential of AM.
Download or read book Hot work tool steel in laser powder bed fusion from parameter optimization to quality monitoring in industrial application written by Liang Wu and published by BoD – Books on Demand. This book was released on 2024-01-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation thesis focuses on applying the powder bed fusion with laser beam (PBF-LB) technology on hot work steel. It aims at achieving comparable properties with the products from the traditional manufacturing route. Using the reference powder H13, the influence of various factors, i.e., laser settings (such as laser power and scan speed) and machine settings (such as preheating) on the melting pool morphology and printing defects, is intensively investigated to check the feasibility of printing H13 components through PBF-LB technology and finally optimize the fabrication parameters for high-quality printing in lab-scale size. Furthermore, the consecutive research on the impact of the post-treatment, machine sensitivity, and powder condition provides a basis for scaling up the process and offers industrially usable products with adequate properties. Furthermore, after assessing the defects during the investigation, the classification of the defects deepens the understanding of the material-laser interaction. The mechanism for stress-lead cracks can guide the development of new types of material applied to the PBF-LB process, especially carbon-bearing steel. Finally, based on the mechanism of defect generation, the principle of the real-time defect-based monitoring system is proposed. After recognizing defects and assembling discrete points, the digital twin is established from various monitoring signals, which can be applied for on-time quality assurance without destructive testing.
Download or read book Cladded steel for clutch disc carriers written by Hinrich Lührs and published by BoD – Books on Demand. This book was released on 2021-01-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Für die Prozessroute von Lamellenträgern können Stahlschichtverbundwerkstoffe, bestehend aus einem duktilem Grundmaterial und einer verschleißfesten Deckschicht, eine kostengünstige Alternative bieten. Im Rahmen der vorliegenden Arbeit wurden die Umformbarkeit, die Verschleißfestigkeit und die Eigenspannungen verschiedener Stahlschichtverbundwerkstoffe betrachtet. Die Umformbarkeit und das Versagensverhalten wurde mittels Biegeversuchen untersucht. Durch in-Situ Biege- und Zugversuche mit anschließender digitaler Bildkorrelation wurden die lokalen Dehnungsverteilungen ermittelt. Das Versagensverhalten wurde anschließend mithilfe einer erweiterten Umformsimulation modelliert. Die Verschleißfestigkeit und die Verschleißmechanismen wurden auf einem Komponentenprüfstand für Lamellenträger untersucht. Mittels Röntgendiffraktometrie wurde der Eigenspannungstiefenverlauf der Stahlschichtverbundwerkstoffe ermittelt.
Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2021-06-22 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The residual stress is a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, lightweight materials such as composites and their wide range of applications; it is critical that the residual stresses of composite materials are understood and measured correctly.The first edition of this book consists of thirteen chapters divided into two parts. The first part reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. There are also additional chapters on using mathematical (analytical and numerical) methods for the calculation of residual stresses in composite materials. These include the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses measuring residual stresses in different types of composites including polymer and metal matrix composites. The addition of nanoparticles to the matrix of polymeric composites as a new technique for the reduction of residual stresses is also discussed.In the Second Edition of this book, each of the original chapters of the first edition has been fully updated, taking into account the latest research and new developments. There are also five new chapters on the theoretical and experimental studies of residual stresses in the composite integrated circuits; residual stresses in additive manufacturing of polymers and polymer matrix composites; residual stresses in metal matrix composites fabricated by additive manufacturing; the eigenstrain based method for the incremental hole-drilling technique; and the estimation of residual stresses in polymer matrix composites using the digital image correlation technique.Residual Stresses in Composite Materials, Second Edition, provides a unique and comprehensive overview of this important topic and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine, and sporting industries. - Presents the latest developments on theoretical and experimental studies of residual stresses in composites - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in the polymer matrix, metal matrix, and ceramic matrix composites - Considers the addition of nanoparticles to the matrix as a new technique for reduction of residual stresses in polymeric composites - Introduces the latest advancements of research on the residual stresses in additive-manufactured polymer and metal matrix composites
Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, light-weight materials such as composites and their wide range of applications in the aerospace and automotive industries, in civil infrastructure and in sporting applications, it is critical that the residual stresses of composite materials are understood and measured correctly.The first part of this important book reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. Various mathematical (analytical and numerical) methods for calculation of residual stresses in composite materials are also presented. Chapters in the first section of the book discuss the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses residual stresses in polymer matrix, metal-matrix and a range of other types of composites. Moreover, the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses is discussed.Residual stresses in composite materials provides a comprehensive overview of this important topic, and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine and sporting industries. - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in polymer matrix, metal-matrix and other types of composite - Considers the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses
Download or read book Steel Heat Treatment Handbook written by George E. Totten and published by CRC Press. This book was released on 1997-02-21 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource provides practical, modern approaches to steel heat treatment topics such as sources of residual stress and distortion, hardenability prediction, modeling, effects of steel alloy chemistry on heat treatment, quenching, carburizing, nitriding, vacuum heat treatment, metallography, and process equipment. Containing recent data and developments from international experts, the Steel Treatment Handbook discusses the principles of heat treatment; quenchants, quenching systems, and quenching technology; strain gauge procedures, X-ray diffraction, and other residual stress measurement methods; carburizing and carbonitriding; powder mettalurgy technology; metallography and physical property determination; ecological regulations and safety standards; and more. Well illustrated with nearly 1000 tables, equations, figures, and photographs, the Steel Heat Treatment Handbook is an excellent reference for materials, manufacturing, heat treatment, maintenance, mechanical, industrial, process and quality control, design, and research engineers; department or corporate metallurgists; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1993 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Residual Stresses 2018 written by Marc Seefeldt and published by Materials Research Forum LLC. This book was released on 2018-10-10 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Conference on Residual Stresses (ECRS) series is the leading European forum for scientific exchange on internal and residual stresses in materials. It addresses both academic and industrial experts and covers a broad gamut of stress-related topics from instrumentation via experimental and modelling methodology up to stress problems in specific processes such as welding or shot-peening, and their impact on materials properties. Chapters: Diffraction Methods; Mechanical Relaxation Methods; Acoustic and Electromagnetic Methods; Composites, Nano and Microstructures; Films, Coatings and Oxides; Cold Working and Machining; Heat Treatments and Phase Transformations; Welding, Fatigue and Fracture: Stresses in Additive Manufacturing.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.
Download or read book International Conference on Residual Stresses written by G. Beck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1043 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are always introduced in materials when they are produced, or when they undergo non-uniform plastic deformation during use. The circumstances that can cause residual stresses are therefore numerous. Residual stresses exist in all materials and, depending on their distribution, can playa beneficial role (for example, compressive surface stress) or have a catastrophic effect, especially on fatigue behaviour and corrosion properties. The subject of residual stresses took form around 1970 with the development of methods to measure macroscopic deformations during the machining of materials or on an atomic scale by X-ray diffraction. These techniques have made considerable progress in the last 20 years. The meetings organized in several countries (Germany, France, Japan, etc. ) have largely contributed to this progress, aided by the numerous exchanges of information and knowledge to which they have given rise. Studies of the formation of residual stresses began more slowly, but have progressed with the emergence of increasingly realistic models of materials behaviour and with access to ever more powerful codes for numerical calculations. Two successive meetings for discussing this topic have been held in Europe. The first, held in 1982 in Nancy (France), consisted of 30 participants from 5 countries. The second was held in Linkoping (Sweden) in 1984, with 80 participants of 16 nationalities. It was decided to hold a first International Conference, ICRS, to address all aspects of the problem. Held in 1986 in Garmisch-Partenkirschen (FRG), it was an assembly of neady 300 participants from 21 countries.
Download or read book Progress in Durability Analysis of Composite Systems written by K.L. Reifsnider and published by CRC Press. This book was released on 1998-01-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite material systems are the basis for much of the natural world around us and are rapidly becoming the basis for many modern engineering components. A controlling feature for the general use of such systems is their damage tolerance, durability and reliability. The present book is a comprehensive cross section of the state of the art in the field of the durability of polymer-based, composite, and adhesive systems. As such, it is of special value to researchers concerned with the frontier of the field, to students concerned with the substance of the subject, and to the applied community concerned with the finding methodologies that make it possible to design safe and durable engineering components using material systems.
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1995-04 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
