Download or read book Reservoir Stimulation written by Michael J. Economides and published by . This book was released on 2000-06-23 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets forth a rationalisation of stimulation using reservoir engineering concepts, and addresses topics such as formation characterisation, hydraulic fracturing and matrix acidizing. Formation damage, which refers to a loss in reservoir productivity, is also examined comprehensively.
Download or read book A Practical Companion to Reservoir Stimulation written by M.J. Economides and published by Elsevier. This book was released on 1992-01-03 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This workbook is a practical companion to the second edition of the textbook Reservoir Stimulation. The two books are intended to be used together. This new volume should be particularly useful for the training of new engineers and petroleum engineering students, as it contains approximately 100 problems and their solutions, plus a lengthy chapter giving data necessary for designing a stimulation treatment. Chapters are included containing practical problems on reservoir and well considerations, rock mechanics, fracturing fluids and proppants, fracture calibration treatments, design and modeling of propped fractures, evaluation of fracture treatments, design of matrix treatments, diversion and treatment evaluation, design and performance of acid fractures and stimulation of horizontal wells. These chapters are labeled with letters from A to J to distinguish them from their companion chapters in Reservoir Stimulation. Equations, figures and tables from the textbook are referred to in the workbook but are not reproduced.
Download or read book Development of coupled THM models for reservoir stimulation and geo energy production with supercritical CO2 as working fluid written by Jianxing Liao and published by Cuvillier Verlag. This book was released on 2020-07-28 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation, two specific numerical models have been developed to address the issues associated with utilization of supercritical CO2, like fracture creation, proppant placement and fracture closure in unconventional gas reservoirs, reservoir stimulation, heat production and CO2 sequestration in deep geothermal reservoirs, respectively. In unconventional gas reservoir, the model consisting of classic fracture model, proppant transport model as well as temperature-sensitive fracturing fluids (CO2, thickened CO2 and guar gum) has been integrated into the popular THM coupled framework (TOUGH2MP-FLAC3D), which has the ability to simulate single fracture propagation driven by different fracturing fluids in non-isothermal condition. To characterize the fracture network propagation and internal multi fluids behavior in deep geothermal reservoirs, an anisotropic permeability model on the foundation of the continuum anisotropic damage model has been developed and integrated into the popular THM coupled framework (TOUGH2MP-FLAC3D) as well. This model has the potential to simulate the reservoir stimulation and heat extraction based on a CO2-EGS concept.
Download or read book Petroleum Reservoir Simulation written by M. Rafiqul Islam and published by Gulf Professional Publishing. This book was released on 2020-01-17 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Reservoir Simulation, Second Edition, introduces this novel engineering approach for petroleum reservoir modeling and operations simulations. Updated with new exercises, a new glossary and a new chapter on how to create the data to run a simulation, this comprehensive reference presents step-by-step numerical procedures in an easy to understand format. Packed with practical examples and guidelines, this updated edition continues to deliver an essential tool for all petroleum and reservoir engineers. Includes new exercises, a glossary and references Bridges research and practice with guidelines on introducing basic reservoir simulation parameters, such as history matching and decision tree content Helps readers apply knowledge with assistance on how to prepare data files to run a reservoir simulator
Download or read book Unconventional Tight Reservoir Simulation Theory Technology and Practice written by Qiquan Ran and published by Springer Nature. This book was released on 2020-08-14 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces readers to the simulation theory and techniques of multiple media for unconventional tight reservoirs. It summarizes the macro/microscopic heterogeneities; the features of multiscale multiple media; the characteristics of complex fluid properties; the occurrence state of continental tight oil and gas reservoirs in China; and the complex flow characteristics and coupled production mechanism under unconventional development patterns. It also discusses the simulation theory of multiple media for unconventional tight oil and gas reservoirs; mathematic model of flow through discontinuous multiple media; geological modeling of discrete multiscale multiple media; and the simulation of multiscale, multiphase flow regimes and multiple media. In addition to the practical application of simulation and software for unconventional tight oil and gas, it also explores the development trends and prospects of simulation technology. The book is of interest to scientific researchers and technicians engaged in the development of oil and gas reservoirs, and serves as a reference resource for advanced graduate students in fields related to petroleum.
Download or read book Advanced Petroleum Reservoir Simulation written by M. R. Islam and published by John Wiley & Sons. This book was released on 2016-08-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the original volume adds significant new innovations for revolutionizing the processes and methods used in petroleum reservoir simulations. With the advent of shale drilling, hydraulic fracturing, and underbalanced drilling has come a virtual renaissance of scientific methodologies in the oil and gas industry. New ways of thinking are being pioneered, and Dr. Islam and his team have, for years now, been at the forefront of these important changes. This book clarifies the underlying mathematics and physics behind reservoir simulation and makes it easy to have a range of simulation results along with their respective probability. This makes the risk analysis based on knowledge rather than guess work. The book offers by far the strongest tool for engineers and managers to back up reservoir simulation predictions with real science. The book adds transparency and ease to the process of reservoir simulation in way never witnessed before. Finally, No other book provides readers complete access to the 3D, 3-phase reservoir simulation software that is available with this text. A must-have for any reservoir engineer or petroleum engineer working upstream, whether in exploration, drilling, or production, this text is also a valuable textbook for advanced students and graduate students in petroleum or chemical engineering departments.
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Download or read book Shale Gas and Tight Oil Reservoir Simulation written by Wei Yu and published by Gulf Professional Publishing. This book was released on 2018-08-10 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale Gas and Tight Oil Reservoir Simulation delivers the latest research and applications used to better manage and interpret simulating production from shale gas and tight oil reservoirs. Starting with basic fundamentals, the book then includes real field data that will not only generate reliable reserve estimation, but also predict the effective range of reservoir and fracture properties through multiple history matching solutions. Also included are new insights into the numerical modelling of CO2 injection for enhanced oil recovery in tight oil reservoirs. This information is critical for a better understanding of the impacts of key reservoir properties and complex fractures. Models the well performance of shale gas and tight oil reservoirs with complex fracture geometries Teaches how to perform sensitivity studies, history matching, production forecasts, and economic optimization for shale-gas and tight-oil reservoirs Helps readers investigate data mining techniques, including the introduction of nonparametric smoothing models
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Embedded Discrete Fracture Modeling and Application in Reservoir Simulation written by Kamy Sepehrnoori and published by Elsevier. This book was released on 2020-08-27 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of naturally fractured reservoirs, especially shale gas and tight oil reservoirs, exploded in recent years due to advanced drilling and fracturing techniques. However, complex fracture geometries such as irregular fracture networks and non-planar fractures are often generated, especially in the presence of natural fractures. Accurate modelling of production from reservoirs with such geometries is challenging. Therefore, Embedded Discrete Fracture Modeling and Application in Reservoir Simulation demonstrates how production from reservoirs with complex fracture geometries can be modelled efficiently and effectively. This volume presents a conventional numerical model to handle simple and complex fractures using local grid refinement (LGR) and unstructured gridding. Moreover, it introduces an Embedded Discrete Fracture Model (EDFM) to efficiently deal with complex fractures by dividing the fractures into segments using matrix cell boundaries and creating non-neighboring connections (NNCs). A basic EDFM approach using Cartesian grids and advanced EDFM approach using Corner point and unstructured grids will be covered. Embedded Discrete Fracture Modeling and Application in Reservoir Simulation is an essential reference for anyone interested in performing reservoir simulation of conventional and unconventional fractured reservoirs. Highlights the current state-of-the-art in reservoir simulation of unconventional reservoirs Offers understanding of the impacts of key reservoir properties and complex fractures on well performance Provides case studies to show how to use the EDFM method for different needs
Download or read book Principles of Applied Reservoir Simulation written by John R. Fanchi, and published by Gulf Professional Publishing. This book was released on 2018-06-05 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir engineers today need to acquire more complex reservoir management and modeling skills. Principles of Applied Reservoir Simulation, Fourth Edition, continues to provide the fundamentals on these topics for both early and seasoned career engineers and researchers. Enhanced with more practicality and with a focus on more modern reservoir simulation workflows, this vital reference includes applications to not only traditional oil and gas reservoir problems but specialized applications in geomechanics, coal gas modelling, and unconventional resources. Strengthened with complementary software from the author to immediately apply to the engineer’s projects, Principles of Applied Reservoir Simulation, Fourth Edition, delivers knowledge critical for today’s basic and advanced reservoir and asset management. Gives hands-on experience in working with reservoir simulators and links them to other petroleum engineering activities Teaches on more specific reservoir simulation issues such as run control, tornado plot, linear displacement, fracture and cleat systems, and modern modelling workflows Updates on more advanced simulation practices like EOR, petrophysics, geomechanics, and unconventional reservoirs
Download or read book An Introduction to Multiphase Multicomponent Reservoir Simulation written by Matthew Balhoff and published by Elsevier. This book was released on 2022-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Petroleum Reservoir Simulation is aimed toward graduate students and professionals in the oil and gas industry working in reservoir simulation. It begins with a review of fluid and rock properties and derivation of basic reservoir engineering mass balance equations. Then equations and approaches for numerical reservoir simulation are introduced. The text starts with simple problems (1D, single phase flow in homogeneous reservoirs with constant rate wells) and subsequent chapters slowly add complexities (heterogeneities, nonlinearities, multi-dimensions, multiphase flow, and multicomponent flow). Partial differential equations and finite differences are then introduced but it will be shown that algebraic mass balances can also be written directly on discrete grid blocks that result in the same equations. Many completed examples and figures will be included to improve understanding. An Introduction to Petroleum Reservoir Simulation is designed for those with their first exposure to reservoir simulation, including graduate students in their first simulation course and working professionals who are using reservoir simulators and want to learn more about the basics. Presents basic equations and discretization for multiphase, multicomponent transport in subsurface media in a simple, easy-to-understand manner Features illustrations that explain basic concepts and show comparison to analytical solutions and commercial simulators Includes dozens of completed example problems on a small number of grid blocks Offers pseudocode and exercises to allow the reader to develop their own computer-based numerical simulator that can be verified against analytical solutions and commercial simulators
Download or read book Advanced Modelling with the MATLAB Reservoir Simulation Toolbox written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2021-11-25 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents advanced reservoir simulation methods used in the widely-used MRST open-source software for researchers, professionals, students.
Download or read book Coiled Tubing and Other Stimulation Techniques written by Mohammed Ismail Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good engineers never stop looking for opportunities to improve the performance of their production systems. Performance enhancement methods are always carefully examined, and production data is analyzed in order to identify determining factors affecting performance.The two main activities of the production engineer in the petroleum and related industries are reservoir stimulation and artificial lift. The classic solution to maximizing a well's productivity is to stimulate it. The basis for selecting stimulation candidates should be a review of the well's actual and theoretical IPR. Low permeability wells often need fracturing on initial completion. In low permeability zones, additional post stimulation production can be significant to the economics, however, the production engineer needs to make management aware of the true long term potential or else overly optimistic projections can easily be made.The main purpose of stimulation is to enhance the property value by the faster delivery of the petroleum fluid and/or to increase ultimate economic recovery. The aim of reservoir stimulation is to bypass near-wellbore damage and return a well to its “natural” productivity / injectivity, to extend a conductive path deep into a formation and thus increase productivity beyond the natural level and to produce hydrocarbon from tight formation.The importance of reservoir stimulation is increasing due to following reasons: • Hydrocarbon fields in their mid-life• Production in these fields are in declining trend• The thrust area: Enhancement of productionHence, to improve productivity of the well matrix stimulation and hydraulic fracturing are intended to remedy, or even improve, the natural connection of the wellbore with the reservoir, which could delay the need for artificial lift.This book presents procedures taken in the Oil & Gas Industry for identifying well problems, and it suggests means of solving problems with the help of the Coil Tube unit which is used for improving well productivity and techniques like Acidizing and Hydraulic Fracturing.
Download or read book Basic Applied Reservoir Simulation written by Turgay Ertekin and published by . This book was released on 2001 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in reservoir modeling and simulation written by Jinze Xu and published by Frontiers Media SA. This book was released on 2023-03-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development Geology Reference Manual written by Diana Morton-Thompson and published by AAPG. This book was released on 1993 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:
