Download or read book RESEARCH AND DEVELOPMENT OF PLASTICS RECYCLING TECHNOLOGY written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Developments in Plastic Recycling written by Jyotishkumar Parameswaranpillai and published by Springer Nature. This book was released on 2021-10-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive account of the recent developments in the recycling of plastic waste material. It presents state-of-the-art procedures for recycling of plastics from different sources and various characterization methods adopted in analyzing their properties. In addition, it looks into properties, processing, and applications of recycled plastic products as one of the drivers for sustainable recycling plastics especially in developing countries. This book proves a useful reference source for both engineers and researchers working in composite materials science as well as the students attending materials science, physics, chemistry, and engineering courses.

Download or read book Mixed Plastics Recycling Technology written by Bruce Hegberg and published by William Andrew. This book was released on 1992-12-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

Download or read book Improving Markets for Recycled Plastics Trends Prospects and Policy Responses written by OECD and published by OECD Publishing. This book was released on 2018-05-24 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become one of the most prolific materials on the planet: in 2015 we produced about 380 million tonnes of plastics globally, up from 2 million tonnes in the 1950s. Yet today only 15% of this plastic waste is collected and recycled into secondary plastics globally each year. This ...

Download or read book Circular Plastics Technologies written by Katrina Knauer and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-01-29 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Frontiers in the Science and Technology of Polymer Recycling written by Güneri Akovali and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers, main components of plastics and rubbers, are being discarded in increasing quantities. But this waste can also be considered as `plastic gold'. Public concern, coupled with the inherent value of the material, means that recycling is imperative. The present book presents a survey of current knowledge in the form of case studies, including current legal and educational issues. Topics covered also include regulation and practice in NATO countries, the economics of recycling, the reprocessing of single polymers and mixtures, and future prospects and strategies. Audience: Vital reading for all polymer scientists, technicians and engineers.

Download or read book Advances in Plastics Recycling Research and Development written by Robert DiRaddo and published by . This book was released on 1993 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing for Plastic Recycling written by Rupinder Singh and published by CRC Press. This book was released on 2022-04-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date discussion of breakthroughs on additive manufacturing for plastic material recycling to boost a circular economy. It offers new ideas of combining/hybridizing processing methods that work as a source of information for manufacturers in making new and strategic product development plans. Additive Manufacturing for Plastic Recycling: Efforts in Boosting a Circular Economy provides a critical, comprehensive, methodological, and strong state-of-the-art work on the processing of thermoplastic and thermosetting along with new directions and applications. It describes the common and hybrid approaches of recycling processes and includes theoretical and practical ideas of combining/hybridizing processing methods with the use of fused deposition modelling, which is one of the low-cost additive manufacturing techniques. The book also discusses mechanical twin-screw extrusion followed by case studies for developing hybrid composite structures for biomedical and structural applications. Recent innovations in melt processing for recycling and the fundaments, process parameters investigations, and applications for new product development are also presented. This book is a first-hand reference source of information for academic scholars and commercial manufacturers for making strategic development plans for new product development.

Download or read book Understanding Plastics Recycling written by Natalie Rudolph and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2020-10-12 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the true and often-underestimated market potential of plastics recycling, with analysis from economic, ecological, and technical perspectives. It is aimed at both technical and non-technical readers, including decision makers in material suppliers, plastic product manufacturers, governmental agencies, educators, and anyone with a general interest in plastics recycling. An overview of waste handling systems with a focus on the U.S. market is provided. Different methods of waste handling are compared from both economic and ecological perspectives. Since plastic waste recycling is essential from an ecological point of view, common strategies and new approaches to both increase the recycling rate and improve recycling economically and technically are presented. This includes processing and material properties of recycled plastics. Finally, a worldwide outlook of plastic recycling is provided with analysis of additional worldwide markets, encompassing highly developed, fast-developing, and less developed countries. This revised and expanded second edition also contains a new section on fiber-reinforced plastics and considerations for recycling them as well as numerous updates on the data and the context analyzed throughout the book. The spreadsheets used in the economic analyses are also offered as a bonus for the reader to download from plus.hanser-fachbuch.de/en. True to the authors’ mission, this book is printed on recycled paper.

Download or read book 1995 Federal Research and Development Program in Materials Science and Technology written by National Science and Technology Council (U.S.). Materials Technology Subcommittee and published by . This book was released on 1995 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastic Recycling written by Sati Manrich and published by . This book was released on 2009 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the discovery of plastics several decades ago, the widespread consumption of plastic products and their subsequent inappropriate disposal and accumulation have recently generated new societal concerns of waste management due to their inherent slow degradability, high volume increase and low recycling rates, which are negative on the basis of self-sustainability. Regulations imposing waste reduction, reuse and recycling indices and responsibilities, as well as effective collecting system and the development of new, environmentally clean recycling technologies are some of the efforts to achieve the self-sustainability goals. The efficiency of the collection and sorting systems impacts directly on the amount of recycled plastics and on their cleanness and quality, therefore, enlarging their market potential. The development of new recycling technologies is diversified and can be classified into mechanical, chemical and energetic recycling. In mechanical recycling, successful technologies are achieved through the improvement of existing processes using additives, blends with other plastics and alternative processing routes in order to maintain the original properties of the virgin resin and even allowing them to return to the same application as originally intended. Chemical recycling processes to obtain intermediary products for new polymers become feasible due to the cost reduction of the raw materials involved. Lastly, despite the under use of the gross energy potential of the raw materials employed, energetic recycling plants are gaining a proportion of residues whose technological solutions for separation and/or reprocessing are deficient, but which, on the other hand, are voluminous, consequently solving the problem of both residue accumulation in densely populated regions and their respective insufficient energy supplies. In this book, the authors proposed to present an overview of the current state of this whole plastic recycling sector including their recent advances, and highlighting new markets and recent trends on recycling technologies around the world. However, mechanical recycling has been emphasised owing to the experimental and published work of Manrich's workgroup at the 3R Residues Recycling Center, which has concentrated on studying all the steps in the process of mechanical recycling.

Download or read book Emerging Technologies in Plastics Recycling written by and published by . This book was released on 1992 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing for Plastic Recycling written by Rupinder Singh and published by CRC Press. This book was released on 2022-04-26 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date discussion of breakthroughs on additive manufacturing for plastic material recycling to boost a circular economy. It offers new ideas of combining/hybridizing processing methods that work as a source of information for manufacturers in making new and strategic product development plans. Additive Manufacturing for Plastic Recycling: Efforts in Boosting a Circular Economy provides a critical, comprehensive, methodological, and strong state-of-the-art work on the processing of thermoplastic and thermosetting along with new directions and applications. It describes the common and hybrid approaches of recycling processes and includes theoretical and practical ideas of combining/hybridizing processing methods with the use of fused deposition modelling, which is one of the low-cost additive manufacturing techniques. The book also discusses mechanical twin-screw extrusion followed by case studies for developing hybrid composite structures for biomedical and structural applications. Recent innovations in melt processing for recycling and the fundaments, process parameters investigations, and applications for new product development are also presented. This book is a first-hand reference source of information for academic scholars and commercial manufacturers for making strategic development plans for new product development.

Download or read book Understanding Plastics Recycling written by Natalie Rudolph and published by . This book was released on 2020-09 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the true and often-underestimated market potential of plastics recycling, with analysis from economic, ecological, and technical perspectives. It is aimed at both technical and non-technical readers, including decision makers in material suppliers, plastic product manufacturers, governmental agencies, educators, and anyone with a general interest in plastics recycling. An overview of waste handling systems with a focus on the U.S. market is provided. Different methods of waste handling are compared from both economic and ecological perspectives. Since plastic waste recycling is essential from an ecological point of view, common strategies and new approaches to both increase the recycling rate and improve recycling economically and technically are presented. This includes processing and material properties of recycled plastics. Finally, a worldwide outlook of plastic recycling is provided with analysis of additional worldwide markets, encompassing highly developed, fast-developing, and less developed countries. This revised and expanded second edition also contains a new section on fiber-reinforced plastics and considerations for recycling them as well as numerous updates on the data and the context analyzed throughout the book. The spreadsheets used in the economic analyses are also offered as a bonus for the reader to download from plus.hanser-fachbuch.de/en. True to the authors' mission, this book is printed on recycled paper.

Download or read book Market Development for Plastics written by California Integrated Waste Management Board and published by . This book was released on 1993 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recycled Materials for Construction Applications written by Luís Eduardo Pimentel Real and published by Springer Nature. This book was released on 2022-10-27 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art on the topic of recycling of plastic building materials, comprising a synthetic market analysis, and presenting the latest developments in plastic recycling technologies. The book also makes recommendations to optimize the success of recycling and encourage the circular economy, while acknowledging the environmental and sustainability implications of plastic recycling for building construction. The distinctive features of this book are the variety of topics covered on sustainable plastic recycling, the discussion of advances in plastic recycling technology, detailed illustrations, and summarized descriptions of separation processes. This book is a guide for both technical and non-technical readers, and for anyone involved in plastic waste or recycling, including researchers and students in plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials.

Download or read book Advances in Plastics written by Werner Rasshofer and published by CRC Press. This book was released on 2019-10-30 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology for the recovery, reprocessing and reuse of automotive polyurethanes in Europe is highly developed and serves as a successful example for other areas. This new book by a leading authority on this technology details the materials and methods, as well as the problems, involved in this work. Going beyond recovery, the authors examine the processes and applications involved in putting recovered material to economic use in marketable products. The text is supplemented with more than 60 tables providing useful data on polyurethane recycling processes and chemistry. More than 60 photographs, micrographs, diagrams and flowcharts illustrate materials, processes and products. In addition to a detailed presentation of this technology, the book provides a review of European regulation and programs dealing with automotive plastics recycling, as well as the voluntary activities of industry organizations and individual companies. The information in this new book will be useful to personnel involved in the research, development and recycling of plastics and other polymeric materials for automotive applications. The details of reprocessing chemistry will be especially useful to polymer chemists working with polyurethanes. Tables Much of the technical data in this book is presented in 64 tables. Here is a small sample of this material: o Plastic Components in Used Cars... o Reaction conditions for glycolysis of the Bayflex 110-80 System o Parameters of the Continuous Pebra-Magna Glycolysis Process o Physical Properties of RIM Polyurethanes Obtained by Using Glycolysis Polyols (20% Filler) o Comparison of the Mechanical Properties Baydur® STR from Virgin Polyol and from 70% RRIM Recycled Polyol o Flame Retardant Behavior of Adhesive-Pressed Boards Based on EA Foam Illustrations More than 60 photographs, micrographs, flowcharts and diagrams illustrated processes and materials, including finished products made of recycled polyurethanes. Here is a