Download or read book Representative Volume Elements and Unit Cells written by Shuguang Li and published by Woodhead Publishing. This book was released on 2019-11-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical methods to estimate material properties usually involve analysis of a representative volume element (RVE) or unit cell (UC). The representative volume element (RVE) or unit cell (UC) is the smallest volume over which a measurement can be made that will yield a value representative of the whole. RVEs and UCs are widely used in the characterisation of materials with multiscale architectures such as composites. However, finite element (FE) software packages such as Abaqus and Comsol MultiPhysics do not offer the capability for RVE and UC modelling directly on their own. To apply them to analyse RVEs and UCs, the generation of the FE models for them, the imposition of boundary conditions, and the extraction of directly relevant results are essentially the responsibility of the user. These have tended to be incorrectly implemented by users! For the first time, this book will provide a comprehensive account on correct modelling of RVEs and UCs, which will eliminate any uncertainties and ambiguities.The book offers a complete and thorough review on the subject of RVEs and UCs, establishing a framework on a rigorous mathematical and mechanical basis to ensure that basic concepts, such as symmetry and free body diagrams, are applied correctly and consistently. It also demonstrates to readers that rigorous applications of mathematics and mechanics are meant to make things clear, consistent, thorough and, most of all, simple and easy to follow, rather than the opposite as many perceive. As a result, the book shows that the appropriate use of RVEs and UCs can deliver an effective and reliable means of material characterisation. It not only provides a much needed comprehensive account on material characterisation but, more importantly, explains how such characterisation can be conducted in a consistent and systematic manner. It also includes a ready-to-use open source code for UCs that can be downloaded from a companion site for potential users to utilise, adapt and expand as they wish. - The companion site for the book can be found at https://www.elsevier.com/books-and-journals/book-companion/9780081026380 - The theories presented in this book will give users more confidence when applying RVE and UC models to analyse materials of complex architectures with accuracy and efficiency - Systematic explanations of RVE and UC theories have been included, as well as their applications in composites - It illustrates in detail how to set up UC models and provides an open source code to implement via Abaqus

Download or read book Finite Element Analysis of Polymers and Composites written by Sathish Kumar Palaniappan and published by Elsevier. This book was released on 2024-08-30 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Analysis of Polymers and its Composites offers up-to-date and significant findings on the finite element analysis of polymers and its composite materials. It is important to point out, that to date, there are no books that have been published in this concept. Thus, academicians, researchers, scientists, engineers, and students in the similar field will benefit from this highly application-oriented book. This book summarizes the experimental, mathematical and numerical analysis of polymers and its composite materials through finite element method. It provides detailed and comprehensive information on mechanical properties, fatigue and creep behaviour, thermal behaviour, vibrational analysis, testing methods and their modeling techniques. In addition, this book lists the main industrial sectors in which polymers and its composite materials simulation is used, and their gains from it, including aeronautics, medical, aerospace, automotive, naval, energy, civil, sports, manufacturing and even electronics. Expands knowledge about the finite element analysis of polymers and composite materials to broaden application range Presents an extensive survey of recent developments in research Offers advancements of finite element analysis of polymers and composite materials Written by leading experts in the field Provides cutting-edge, up-to-date research on the characterization, analysis, and modeling of polymeric composite materials

Download or read book Structure and Mechanics of Textile Fibre Assemblies written by Peter Schwartz and published by Elsevier. This book was released on 2008-10-07 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile structure and mechanics are fundamental to the way textiles are designed, manufactured, tested and used. Structure and mechanics of textile fibre assemblies discusses aspects of fabric structure and mechanical properties such as tensile, bending and shear properties for a range of fabrics.After a general introduction illustrating the role of fabric structure and mechanics, subsequent chapters discuss the structural, tensile, bending and shear properties of woven, knitted and nonwoven fabrics. Other chapters review the structure and mechanics of yarns, coated fabrics, 2D and 3D textile composites. Testing methods for the measurement of fabric mechanical properties and structure parameters are also explored.With its renowned editor and contributions from some of the world's leading authorities, Structure and mechanics of textile fibre assemblies is an important reference for textile scientists, technologists, engineers and those designing and manufacturing textiles. It will also be suitable for those within the academic sector. - Examines aspects of fabric structure and mechanical properties for a range of fabrics - Discusses structure and mechanics of yarn and woven, nonwoven and knitted fabrics - Explores testing methods enabling the measurement of fabric mechanical properties and structural parameters

Download or read book Mechanical Properties and Performance of Engineering Ceramics and Composites IX Volume 35 Issue 2 written by Dileep Singh and published by John Wiley & Sons. This book was released on 2014-11-10 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.

Download or read book Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2013 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: A Generalized Multiscale Analysis Approach brings together comprehensive background information on the multiscale nature of the composite, constituent material behaviour, damage models and key techniques for multiscale modelling, as well as presenting the findings and methods, developed over a lifetime's research, of three leading experts in the field. The unified approach presented in the book for conducting multiscale analysis and design of conventional and smart composite materials is also applicable for structures with complete linear and nonlinear material behavior, with numerous applications provided to illustrate use. Modeling composite behaviour is a key challenge in research and industry; when done efficiently and reliably it can save money, decrease time to market with new innovations and prevent component failure.

Download or read book Computational Mesomechanics of Composites written by Leon L. Mishnaevsky, Jr and published by John Wiley & Sons. This book was released on 2007-08-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical properties of composite materials can be improved by tailoring their microstructures. Optimal microstructures of composites, which ensure desired properties of composite materials, can be determined in computational experiments. The subject of this book is the computational analysis of interrelations between mechanical properties (e.g., strength, damage resistance stiffness) and microstructures of composites. The methods of mesomechanics of composites are reviewed, and applied to the modelling of the mechanical behaviour of different groups of composites. Individual chapters are devoted to the computational analysis of the microstructure- mechanical properties relationships of particle reinforced composites, functionally graded and particle clusters reinforced composites, interpenetrating phase and unidirectional fiber reinforced composites, and machining tools materials.

Download or read book Non Crimp Fabric Composites written by Stepan V Lomov and published by Elsevier. This book was released on 2011-04-19 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-crimp fabric (NCF) composites are reinforced with mats of straight (non-crimped) fibres, giving them such advantages as strength, ease of handling and low manufacturing costs. Non-crimp fabric composites provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering.Part one covers the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis. Part two goes on to discuss the manufacture of non-crimp fabric composites, with chapters covering such topics as deformability and permeability of NCF. Part three focuses on the properties of NCF composites, with chapters on stiffness and strength, damage progression and fatigue. Finally, part four covers the applications of NCF composites, including chapters on the aerospace and automotive industries as well as wind turbines and helicopter applications. The book concludes with a discussion of cost analysis of NCF composites in engineering applications.With its distinguished editor and international team of expert contributors, Non-crimp fabric composites is an essential reference for composite manufacturers and structural and mechanical engineers in industries using NCF composites, as well as academics with a research interest in the field. - Provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering - Reviews the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis - Examines the properties of NCF composites considering stiffness and strength, damage progression and fatigue

Download or read book Computational Methods for Microstructure Property Relationships written by Somnath Ghosh and published by Springer Science & Business Media. This book was released on 2010-11-17 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Microstructure-Property Relationships introduces state-of-the-art advances in computational modeling approaches for materials structure-property relations. Written with an approach that recognizes the necessity of the engineering computational mechanics framework, this volume provides balanced treatment of heterogeneous materials structures within the microstructural and component scales. Encompassing both computational mechanics and computational materials science disciplines, this volume offers an analysis of the current techniques and selected topics important to industry researchers, such as deformation, creep and fatigue of primarily metallic materials. Researchers, engineers and professionals involved with predicting performance and failure of materials will find Computational Methods for Microstructure-Property Relationships a valuable reference.

Download or read book Characterization of Carbon Nanotube Based Composites under Consideration of Defects written by Moones Rahmandoust and published by Springer. This book was released on 2015-10-14 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the characterization methods involved with carbon nanotubes and carbon nanotube-based composites, with a more detailed look at computational mechanics approaches, namely the finite element method. Special emphasis is placed on studies that consider the extent to which imperfections in the structure of the nanomaterials affect their mechanical properties. These defects may include random distribution of fibers in the composite structure, as well as atom vacancies, perturbation and doping in the structure of individual carbon nanotubes.

Download or read book American Society for Composites Eighth Proceedings written by American Society for Composites. Technical Conference and published by CRC Press. This book was released on 1993-10-15 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micromechanical Analysis and Multi Scale Modeling Using the Voronoi Cell Finite Element Method written by Somnath Ghosh and published by CRC Press. This book was released on 2011-06-23 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: As multi-phase metal/alloy systems and polymer, ceramic, or metal matrix composite materials are increasingly being used in industry, the science and technology for these heterogeneous materials has advanced rapidly. By extending analytical and numerical models, engineers can analyze failure characteristics of the materials before they are integrat

Download or read book Mechanics of Textile Composites Conference written by Charles E. Harris and published by . This book was released on 1995 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Textiles and Their Applications written by C. Lawrence and published by Elsevier. This book was released on 2014-08-21 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: High performance textiles represent one of the most dynamic sectors of the international textile and clothing industry. With contributions from leading experts in the field, this book provides an important overview of key developments in the field. Chapters cover the use of high performance textiles in such areas as protective clothing, heat and fire protection, medicine, civil engineering and the energy sector. - Reviews various approaches to modelling the geometry, structure and mechanical and physical properties of advanced textile materials - Evaluates novel surface treatments involving plasma and laser technologies for a range of high performance textiles - Focuses on textiles for specific purposes, with chapters devoted to textiles for heat and fire protection, wound care, industrial filtration, geotextiles, civil engineering and sustainable energy applications

Download or read book Modern Mechanical Engineering written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2014-01-07 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

Download or read book Practical Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2021-08-31 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Micromechanics of Composite Materials provides an accessible treatment of micromechanical theories for the analysis and design of multi-phased composites. Written with both students and practitioners in mind and coupled with a fully functional MATLAB code to enable the solution of technologically relevant micromechanics problems, the book features an array of illustrative example problems and exercises highlighting key concepts and integrating the MATLAB code. The MATLAB scripts and functions empower readers to enhance and create new functionality tailored to their needs, and the book and code highly complement one another. The book presents classical lamination theory and then proceeds to describe how to obtain effective anisotropic properties of a unidirectional composite (ply) via micromechanics and multiscale analysis. Calculation of local fields via mechanical and thermal strain concentration tensors is presented in a unified way across several micromechanics theories. The importance of these local fields is demonstrated through the determination of consistent Margins of Safety (MoS) and failure envelopes for thermal and mechanical loading. Finally, micromechanics-based multiscale progressive damage is discussed and implemented in the accompanying MATLAB code. - Emphasizes appropriate application of micromechanics theories to composite behavior - Addresses multiple popular micromechanics theories, which are provided in MATLAB - Discusses stresses and strains resulting from realistic thermal and mechanical loading - Includes availability of solution manual for professors using the book in the classroom

Download or read book IUTAM Symposium on Smart Structures and Structronic Systems written by Ulrich Gabbert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium on Smart Structures and Structronic Systems, held in Magdeburg, Germany, 26-29 September 2000