Download or read book Securing Advanced Manufacturing in the United States written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-10-11 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manufacturing USA initiative seeks to reinforce U.S.-based advanced manufacturing through partnerships among industry, academia, and government. Started in 2012 and established with bipartisan support by the Revitalize American Manufacturing and Innovation Act of 2014, the initiative envisages a nationwide network of research centers for manufacturing innovation. As of May 2017, 14 manufacturing innovation institutes had been established to facilitate the movement of early-stage research into proven capabilities ready for adoption by U.S. manufacturers. To better understand the role and experiences of the Manufacturing USA institutes to date, a committee of the Innovation Policy Forum of the National Academies of Sciences, Engineering, and Medicine convened a workshop on May 23, 2017 drawing together institute directors and manufacturing policy experts along with leaders from industry, academia, and government. Participants addressed the role of the manufacturing institutes in increasing advanced manufacturing in the United States, examined selected foreign programs designed to support advanced manufacturing, and reviewed recent assessments of existing institutes. This publication summarizes the presentations and discussions from the workshop.

Download or read book Examining Federal Advanced Manufacturing Programs written by United States. Congress. House. Committee on Science, Space, and Technology (2011). Subcommittee on Research and Technology and published by . This book was released on 2013 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2023-12-05 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Strategic Planning for National Manufacturing Competitiveness written by United States. Congress. House. Committee on Science, Space, and Technology (2011). Subcommittee on Research and Technology and published by . This book was released on 2013 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strengthening American Manufacturing written by Committee on 21st Century Manufacturing: The Role of the Manufacturing Extension Partnership Program of the National Institute of Standards and Technology and published by National Academies Press. This book was released on 2013-10-03 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manufacturing Extension Partnership (MEP)-- a program of the U.S. Department of Commerce's National Institute of Standards and Technology (NIST)-- has sought for more than two decades to strengthen American manufacturing. It is a national network of affiliated manufacturing extension centers and field offices located throughout all fifty states and Puerto Rico. Qualified MEP Centers work directly with small and medium manufacturing firms in their state or sub-state region, providing expertise, services and assistance directed to foster growth, improve supply chain positioning, leverage emerging technologies, upgrade manufacturing processes, develop work force training, and apply and implement new information. Strengthening American Manufacturing: The Role of the Manufacturing Extension Partnership is the summary of a symposium convened to review current operations and some of the recent MEP initiatives in the broader context of global manufacturing trends and the opportunities for high-value manufacturing companies. Business leaders, academic experts, and state and federal officials addressed the metrics and impacts of MEP and identified potential areas of improvement. The meeting drew attention to the scale and focuses of MEP, and highlighted the role it plays in supporting and enabling U.S. manufacturers to compete more effectively in the global marketplace. This report includes an overview of key issues raised at this workshop and a detailed summary of the conference presentations.

Download or read book H R 5865 the American Manufacturing Competitiveness Act of 2012 and H R 5859 a Bill to Repeal an Obsolete Provision in Title 49 United States Code Requiring Motor Vehicle Insurance Cost Reporting written by United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Commerce, Manufacturing, and Trade and published by . This book was released on 2013 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovation for Value and Mission written by Peet van Biljon and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-09-20 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation. No other concept is so widely celebrated, yet so secretly dreaded. The reason: innovation requires managing through uncertainty. This is hard for any organization whether private or public, small or large. This book provides a roadmap for those who want to understand and manage innovation in all its aspects. It explains both the "how" and the "why" of innovation – its economic and policy context as well as the techniques by which it can be orchestrated, along with the management systems needed to govern it. Innovation is uniquely presented through both a private-sector (value-creating) and public-sector (mission-fulfilling) lens. Topics covered in context include modern innovation and creativity techniques such as design thinking and the Lean Startup, the organizational challenges of innovation, as well as innovation project- and portfolio management techniques. Business-model innovation and open innovation complete the picture from the manager’s perspective. The private and public financing of R&D, startups, and corporate innovation are presented – contrasting the private and public worlds while explaining how they complement each other. Government innovation policy is discussed in its historical and contemporary context, and the innovation policy toolset is introduced. Continual innovation is vital for companies and countries to prosper. Readers will learn why innovation must follow technological breakthroughs to raise productivity and economic growth, and how innovation – when done right – can benefit larger society. An explanation for unequal growth – that some companies, regions, and countries are not seeing the full productivity gains promised by modern technology – is explored in the context of technology diffusion. No previous experience in innovation management, economics or public policy is assumed, and the book moves fast to equip the reader with practical tools and techniques. Innovation for Value and Mission is suitable for an introductory graduate level course, or as a desk reference for experienced practitioners and policymakers. Because it connects multiple topic areas and contains ample additional references, the book is also a great resource for those with expertise in one particular area of innovation who desire to branch out into other areas.

Download or read book 21st Century Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2013-09-27 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manufacturing Extension Partnership (MEP) - a program of the U.S. Department of Commerce's National Institute of Standards and Technology - has sought for more than two decades to strengthen American manufacturing. It is a national network of affiliated manufacturing extension centers and field offices located throughout all fifty states and Puerto Rico. Funding for MEP Centers comes from a combination of federal, state, local and private resources. Centers work directly with manufacturing firms in their state or sub-state region. MEP Centers provide expertise, services and assistance directed toward improving growth, supply chain positioning, leveraging emerging technologies, improving manufacturing processes, work force training, and the application and implementation of information in client companies through direct assistance provided by Center staff and from partner organizations and third party consultants. 21st Century Manufacturing seeks to generate a better understanding of the operation, achievements, and challenges of the MEP program in its mission to support, strengthen, and grow U.S. manufacturing. This report identifies and reviews similar national programs from abroad in order to draw on foreign practices, funding levels, and accomplishments as a point of reference and discusses current needs and initiatives in light of the global focus on advanced manufacturing,

Download or read book What American Government Does written by Stan Luger and published by JHU Press. This book was released on 2017-05-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Takes a sophisticated approach to big questions . . . assess[es] the huge role of government in American life in an illuminating way.” —Frances Fox Piven Despite widespread anti-government sentiment in recent decades—including complaints that it does too much and that it doesn’t do enough—the fact remains that government has improved the lives of Americans in numerous ways, from providing income, food, education, housing, and healthcare support, to ensuring cleaner air, water, and food, to providing a vast infrastructure upon which economic growth depends. In What American Government Does, Stan Luger and Brian Waddell offer a practical understanding of the scope and function of American governance. They present a historical overview of the development of US governance that is rooted in the theoretical work of Charles Tilly, Karl Polanyi, and Michael Mann. Touching on everything from taxes, welfare, and national and domestic security to the government’s regulatory, developmental, and global responsibilities, each chapter covers a main function of American government and explains how it emerged and then evolved over time. Luger and Waddell are careful to identify both the controversies related to what government does and those areas of government that should elicit concern and vigilance. Analyzing the functions of the US government in terms of both a tug-of-war and a collaboration between state and societal forces, they provide a reading of American political development that dispels the myth of a weak, minimal, non-interventionist state, in a major contribution to the scholarly debate on the nature of the American state and the exercise of power in America.

Download or read book Balanced Trade written by Jesse Richman and published by Lexington Books. This book was released on 2014-04-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: How should a principled nation which believes in the benefits of mutually beneficial trade respond to the predations of mercantilist trading partners and imbalanced trade? Many argue that the response should be to do little or nothing. Balanced Trade argues that achieving the full benefits of international trade requires an effective response. Although trade deficits provide short-term gains in consumption, these are combined with long-term losses in consumption, innovation, investment, employment and power. Furthermore, market mechanisms do not correct trade imbalances that result from mercantilism, nor do they compensate for the long term shift in production and consumption towards the mercantilist. Balancing trade can make important short run and long run contributions to economic stability and prosperity. In America today, despite the growing evidence that imbalanced free trade is not working, many American economists remain adamant in their promotion of free trade. They are also quick to label actions taken to balance trade as protectionism. The political system has also failed to effectively address the problem of imbalanced trade, and the Federal Reserve has often exacerbated rather than addressed the challenge. We show that the classical economic arguments against mercantilism do not justify doing nothing. Effectively responding to imbalanced trade and mercantilism requires careful selection of strategy in order to achieve multiple objectives: balancing trade while maintaining the benefits of international trade, avoiding unnecessary inefficiencies, and maintaining compliance with international law. One of the best options is the Scaled Tariff. By targeting countries with which the United States has a large current account deficit, the Scaled Tariff would efficiently, legally, and effectively balance trade. It would be applied to all imported goods from trade surplus countries that have had a sizable trade surplus with the United States over the most recent four economic quarters.The tariff rate would be designed to take in a portion (e.g. 50%) of the bilateral trade deficit (goods plus services) as revenue. No particular product is protected; the scaled tariff simply changes the terms of trade between the two countries, much as currency devaluation would change the terms of trade with all countries.

Download or read book Workforce Education written by William B. Bonvillian and published by MIT Press. This book was released on 2021-02-02 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: A roadmap for how we can rebuild America's working class by transforming workforce education and training. The American dream promised that if you worked hard, you could move up, with well-paying working-class jobs providing a gateway to an ever-growing middle class. Today, however, we have increasing inequality, not economic convergence. Technological advances are putting quality jobs out of reach for workers who lack the proper skills and training. In Workforce Education, William Bonvillian and Sanjay Sarma offer a roadmap for rebuilding America's working class. They argue that we need to train more workers more quickly, and they describe innovative methods of workforce education that are being developed across the country.

Download or read book The Real Issues of the Middle East and the Arab Spring written by Thomas Andersson and published by Springer Science & Business Media. This book was released on 2012-11-15 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wave of protests and populist uprisings in the Middle East has heightened the focus on a volatile region. But the emphasis on political issues has obscured underlying issues concerning education, infrastructure, research, innovation, entrepreneurship and sustainable economic and social development. This volume, emerging in the aftermath of a conference and workshop on science and technology in the region, presents contributions from a range of experts from the Middle East, Europe, and the United States to provide fresh new insights and perspectives on the challenges and prospects for regional development in the changing global context of our time. The authors explore such topics as: the role of information and communication technologies; mindset change in support of investment in intangible assets and risk-taking; how to approach cultural issues, institutions and governance; collaborations with other regions, and; benchmarking performance while drawing lessons of relevance for the special local context. Ultimately, they offer a number of precise policy recommendations and practical insights for creating an enabling environment for capturing economic, political, and social opportunity.

Download or read book Rising to the Challenge written by National Research Council and published by National Academies Press. This book was released on 2012-08-06 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's position as the source of much of the world's global innovation has been the foundation of its economic vitality and military power in the post-war. No longer is U.S. pre-eminence assured as a place to turn laboratory discoveries into new commercial products, companies, industries, and high-paying jobs. As the pillars of the U.S. innovation system erode through wavering financial and policy support, the rest of the world is racing to improve its capacity to generate new technologies and products, attract and grow existing industries, and build positions in the high technology industries of tomorrow. Rising to the Challenge: U.S. Innovation Policy for Global Economy emphasizes the importance of sustaining global leadership in the commercialization of innovation which is vital to America's security, its role as a world power, and the welfare of its people. The second decade of the 21st century is witnessing the rise of a global competition that is based on innovative advantage. To this end, both advanced as well as emerging nations are developing and pursuing policies and programs that are in many cases less constrained by ideological limitations on the role of government and the concept of free market economics. The rapid transformation of the global innovation landscape presents tremendous challenges as well as important opportunities for the United States. This report argues that far more vigorous attention be paid to capturing the outputs of innovation - the commercial products, the industries, and particularly high-quality jobs to restore full employment. America's economic and national security future depends on our succeeding in this endeavor.

Download or read book Break the Caste written by George Gerharz and published by Garrett County Press. This book was released on 2021-10-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Break the Caste, George Gerharz unmasks common American misperceptions of poverty, inequality, and social mobility. Based on personal experience from five decades of anti-poverty work and current research, he proposes solutions to inequality, lack of mobility, and poverty and examines how the American social order and corporate powers create these problems. In this book, he provides four strategies to create a more equal and economically mobile nation.

Download or read book Triennial Review of the National Nanotechnology Initiative written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-12 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale science, engineering, and technology, often referred to simply as "nanotechnology," is the understanding, characterization, and control of matter at the scale of nanometers, the dimension of atoms and molecules. Advances in nanotechnology promise new materials and structures that are the basis of solutions, for example, for improving human health, optimizing available energy and water resources, supporting a vibrant economy, raising the standard of living, and increasing national security. Established in 2001, the National Nanotechnology Initiative (NNI) is a coordinated, multiagency effort with the mission to expedite the discovery, development, and deployment of nanoscale science and technology to serve the public good. This report is the latest triennial review of the NNI called for by the 21st Century Nanotechnology Research and Development Act of 2003. It examines and comments on the mechanisms in use by the NNI to advance focused areas of nanotechnology towards advanced development and commercialization and on the physical and human infrastructure needs for successful realization in the United States of the benefits of nanotechnology development.

Download or read book Public Sector Entrepreneurship written by Dennis Patrick Leyden and published by Oxford University Press. This book was released on 2015-01-06 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Public sector entrepreneurship refers to innovative public policy initiatives that generate greater economic prosperity. These initiatives can transform a status quo economic environment into one that is more conducive to economic units engaging in creative and innovative activities in the face of uncertainty. Public Sector Entrepreneurship traces the historical development of the concepts of private and public sector entrepreneurship and their connection to the separate notions of risk and uncertainty. Based on a formal conceptualization of these notions, the book illustrates throughout public sector entrepreneurship in practice using examples from U.S. technology and innovation policy. Technology policy-policy to enhance the application of new knowledge, learned through science, to some known problem-and innovation policy-policy to enhance the commercialization of a technology-are quintessential examples of the public sector recognizing and exploiting opportunities to bring about change and efficiency. Using this concept of public sector entrepreneurship as the lens to view the Bayh-Dole Act of 1980, the Stevenson-Wydler Act of 1980, the R&E Tax Credit of 1981, Small Business Innovation Development Act of 1982, the National Cooperative Research Act of 1984, and the Omnibus Trade and Competitiveness Act of 1988 affords us the ability to find elements of commonality among these policies and to discuss their impact on the U.S. economy from the perspective of entrepreneurial action.

Download or read book SMEs and Economic Integration in Southeast Asia written by Cassey Lee and published by ISEAS-Yusof Ishak Institute. This book was released on 2019-04-29 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and medium-sized enterprises (SMEs) account for about 97–99 per cent of total enterprises and 60–80 per cent of total employment in ASEAN countries. The participation of SMEs is thus crucial for achieving greater regional economic integration amongst ASEAN countries. SMEs are, however, often constrained by many disadvantages that limit their abilities to become importers and exporters. This is well documented in the research literature on trade and firm size. This volume contains selected ASEAN country studies on the participation of SMEs in regional economic integration based on primary microdata. This is supplemented by empirical studies on the role played by East Asian multinational enterprises in the region. "The editors and authors of SMEs and Economic Integration in Southeast Asia are to be congratulated for this major contribution to the scholarly and policy literature on a subject of much public discussion but limited analytical research. The emphasis on economic integration highlights the importance of these firms in Southeast Asia’s growing regional and global engagement. The thirteen chapters, by leading authors in the field, comprise both insightful country analyses and careful examination of the links between SMEs and foreign investment." Hal Hill, H.W. Arndt Professor Emeritus of Southeast Asian Economies, Australian National University