Download or read book Renewable Energy in District Heating and Cooling written by International Renewable Energy Agency (IRENA) and published by . This book was released on 2017-03-04 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: District heating and cooling (DHC) combined with renewable energy sources can help meet rising urban energy needs, improve efficiency, reduce emissions and improve local air quality. Although currently dominated by fossil fuels such as coal and gas, DHC systems can be upgraded, or new networks created, to use solid biofuel, solar and geothermal energy technologies. Depending on local conditions, renewable-based DHC brings a range of benefits, including increased energy security, improved health and reduced climate impact.To date, only a few countries have taken advantage of their renewable resource potential for DHC or created policies to promote further uptake. Sweden and Switzerland have started promoting renewable-based district heating,while Denmark - with ambitious decarbonisation policies -already uses high shares. Many cities and regions envisage a growing role for district in their energy plans; some are also looking increasingly at district cooling.As this REmap sector study from the International Renewable Energy Agency (IRENA) shows, renewables could feasibly supply more than one fifth of the energy needed for DHC worldwide. But to drive the transition, policy makers need to fully understand the costs, bene¿ts and actual potential for renewable-based DHC.
Download or read book District Energy in Cities written by United Nations Publications and published by UN. This book was released on 2017-03-29 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.
Download or read book Advances in Solar Heating and Cooling written by Ruzhu Wang and published by Woodhead Publishing. This book was released on 2016-05-25 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Solar Heating and Cooling presents new information on the growing concerns about climate change, the security of energy supplies, and the ongoing interest in replacing fossil fuels with renewable energy sources. The amount of energy used for heating and cooling is very significant, estimated, for example, as half of final energy consumption in Europe. Solar thermal installations have the potential to meet a large proportion of the heating and cooling needs of both buildings and industry and the number of solar thermal installations is increasing rapidly. This book provides an authoritative review of the latest research in solar heating and cooling technologies and applications. - Provides researchers in academia and industry with an authoritative overview of heating and cooling for buildings and industry in one convenient volume - Part III, 'Solar cooling technologies' is contributed by authors from Shanghai Jiao Tong University, which is a world-leader in this area - Covers advanced applications from zero-energy buildings, through industrial process heat to district heating and cooling
Download or read book Renewable Heating and Cooling written by Gerhard Stryi-Hipp and published by Elsevier. This book was released on 2015-11-20 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Heating and Cooling: Technologies and Applications presents the latest information on the generation of heat for industry and domestic purposes, an area where a significant proportion of total energy is consumed. In Europe, this figure is estimated to be almost 50%, with the majority of heat generated by the consumption of fossil fuels. As there is a pressing need to increase the uptake of renewable heating and cooling (RHC) to reduce greenhouse gas emissions, this book provides a comprehensive and authoritative overview on the topic. Part One introduces key RHC technologies and discusses RHC in the context of global heating and cooling demand, featuring chapters on solar thermal process heat generation, deep geothermal energy, and solar cooling technologies. Part Two explores enabling technologies, special applications, and case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC, along with case studies in China and Sweden. Users will find this book to be an essential resource for lead engineers and engineering consultants working on renewable heating and cooling in engineering companies, as well as academics and R&D professionals in private research institutes who have a particular interest in the subject matter. Includes coverage on biomass, solar thermal, and geothermal renewable heating and cooling technologies Features chapters on solar thermal process heat generation, deep geothermal energy, solar cooling technologies, and special applications Presents case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC Explores enabling technologies and special applications
Download or read book District Heating and Cooling Networks written by Antonio Colmenar Santos and published by MDPI. This book was released on 2020-05-12 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional thermal power generating plants reject a large amount of energy every year. If this rejected heat were to be used through district heating networks, given prior energy valorisation, there would be a noticeable decrease in the amount of fossil fuels imported for heating. As a consequence, benefits would be experienced in the form of an increase in energy efficiency, an improvement in energy security, and a minimisation of emitted greenhouse gases. Given that heat demand is not expected to decrease significantly in the medium term, district heating networks show the greatest potential for the development of cogeneration. Due to their cost competitiveness, flexibility in terms of the ability to use renewable energy resources (such as geothermal or solar thermal) and fossil fuels (more specifically the residual heat from combustion), and the fact that, in some cases, losses to a country/region’s energy balance can be easily integrated into district heating networks (which would not be the case in a “fully electric” future), district heating (and cooling) networks and cogeneration could become a key element for a future with greater energy security, while being more sustainable, if appropriate measures were implemented. This book therefore seeks to propose an energy strategy for a number of cities/regions/countries by proposing appropriate measures supported by detailed case studies.
Download or read book Renewable Energy for Residential Heating and Cooling written by Iea-Retd and published by Routledge. This book was released on 2012-06-25 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and cooling represent significant energy loads around the world, with the associated high level of carbon emissions. Many countries have commitments in place to derive an increasing proportion of the energy they use for heating and cooling from renewable sources; some are seeing greater success than others in moving towards these targets. This best practices handbook from the International Energy Agency's Renewable Energy Technology Deployment (RETD) Implementing Agreement provides energy policymakers and professionals in the renewable energy industry with a practical, easy to use guide and toolkit to the most effective policy options for deploying renewable energy for heating and cooling in the residential sector. The book opens with a comparative review of renewable energy for heating and cooling policies in a broad range of IEA member countries in Europe, Asia and North America and then goes on to present the policy approaches of the individual countries and more detailed studies of specific programmes. The second part of the book presents readers with flowcharts which allow them to navigate directly to the best practices which are most relevant to their situation. Planning, design and implementation are all covered, each with examination of the possible barriers that may be faced and the most appropriate policy response used to date. pUlished with IEA-RETD.
Download or read book Renewable Energy for Residential Heating and Cooling written by and published by Routledge. This book was released on 2011 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2011. Routledge is an imprint of Taylor & Francis, an informa company.
Download or read book District Heating and Cooling Networks in the European Union written by Antonio Colmenar-Santos and published by Springer. This book was released on 2017-07-18 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.
Download or read book Advanced Concepts for Renewable Energy Supply of Data Centres written by Jaume Salom and published by CRC Press. This book was released on 2022-09-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid increase of cloud computing, high performance computing (HPC) and the vast growth in Internet and Social Media use have aroused the interest in energy consumption and the carbon footprint of Data Centres. Data Centres primarily contain electronic equipment used for data processing (servers), data storage (storage equipment), and communications (network equipment). Collectively, this equipment processes, stores, and transmits digital information and is known as information technology (IT) equipment. Advanced Concepts for Renewable Energy Supply of Data Centres introduces a number of technical solutions for the supply of power and cooling energy into Data Centres with enhanced utilisation of renewable energy sources in order to achieve low energy Data Centres. Because of the high energy density nature of these unique infrastructures, it is essential to implement energy efficiency measures and reduce consumption before introducing any renewable energy source. A holistic approach is used with the objective of integrating many technical solutions such as management of the IT (Information Technology) load, efficient electrical supply to the IT systems, Low-Ex air-conditioning systems, interaction with district heating and cooling networks, re-use of heat, free cooling (air, seawater, groundwater), optimal use of heat and cold storage, electrical storage and integration in smart grids. This book is therefore a catalogue of advanced technical concepts that could be integrated into Data Centres portfolio in order to increase the overall efficiency and the share of renewable energies in power and cooling supply. Based on dynamic energy models implemented in TRNSYS some concepts are deeply evaluated through yearly simulations. The results of the simulation are illustrated with Sankey charts, where the energy flows per year within the subsystems of each concept for a selected scenario are shown, and graphs showing the results of parametric analysis. A set of environmental metrics (as the non-renewable primary energy) and financial metrics (CAPEX and OPEX) as well of energy efficiency metrics like the well-known PUE, are described and used to evaluate the different technical concepts.
Download or read book Integrated Spatial and Energy Planning written by Gernot Stoeglehner and published by Springer. This book was released on 2016-04-02 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on spatial planning – an important determinant of energy saving and renewable energy supply. Revealing the key driving forces for spatial development supporting the shift towards energy efficiency and renewable energy supplies, it shows the importance of integrated spatial and energy planning approaches for a timely and sustainable change of energy systems, thus supporting policies of climate protection. As operating within the context of renewable energy sources is becoming a major policy issue at the international, European and national level, spatial dimensions of renewable energy systems as well as challenges, barriers and opportunities in different spatial contexts become more important. This book analyses not only the fundamental system interrelations between resources, technologies and consumption patterns with respect to energy, but also the links to the spatial context, and provides guidelines for researchers as well as practitioners in this new, emerging field. It presents innovative analytical tools to solve real-world problems and discusses the most important fields of action in integrated spatial and energy planning including planning contents, planning visions and principles as well as planning process design and planning methodology.
Download or read book Geothermal Energy written by Marc A. Rosen and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers geothermal energy systems that utilize ground energy in conjunction with heat pumps to provide sustainable heating and cooling The book describes geothermal energy systems that utilize ground energy in conjunction with heat pumps and related technologies to provide heating and cooling. Also discussed are methods to model and assess such systems, as well as means to determine potential environmental impacts of geothermal energy systems and their thermal interaction. The book presents the most up-to-date information in the area. It provides material on a range of topics, from thermodynamic concepts to more advanced discussions of the renewability and sustainability of geothermal energy systems. Numerous applications of such systems are also provided. Geothermal Energy: Sustainable Heating and Cooling Using the Ground takes a research orientated approach to provide coverage of the state of the art and emerging trends, and includes numerous illustrative examples and case studies. Theory and analysis are emphasized throughout, with detailed descriptions of models available for vertical and horizontal geothermal heat exchangers. Key features: Explains geothermal energy systems that utilize ground energy in conjunction with heat pumps to provide heating and cooling, as well as related technologies such as thermal energy storage. Describes and discusses methods to model and analyze geothermal energy systems, and to determine their potential environmental impacts and thermal interactions. Covers various applications of geothermal energy systems. Takes a research orientated approach to provide coverage of the state of the art and emerging trends. Includes numerous illustrative examples and case studies. The book is key for researchers and practitioners working in geothermal energy, as well as graduate and advanced undergraduate students in departments of mechanical, civil, chemical, energy, environmental, process and industrial engineering.
Download or read book District Heating and Cooling written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Development and Applications and published by . This book was released on 1981 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Renewable Energy Utilization Using Underground Energy Systems written by Paweł Ocłoń and published by Springer Nature. This book was released on 2021-06-25 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses heat transfer in underground energy systems. It covers a wide range of important and practical topics including the modeling and optimization of underground power cable systems, modeling of thermal energy storage systems utilizing waste heat from PV panels cooling. Modeling of PV pannels with cooling. While the performance of energy systems which utilize heat transfer in the ground is not yet fully understood, this book attempts to make sense of them. It provides mathematical modeling fundaments, as well as experimental investigation for underground energy systems. The book shows detailed examples, with solution procedures. The solutions are based on the Finite Element Method and the Finite Volume Method. The book allows the reader to perform a detailed design of various underground energy systems, as well as enables them to study the economic aspects and energy efficiency of underground energy systems. Therefore, this text is of interest to researchers, students, and lecturers alike.
Download or read book Nordic heating and cooling written by Patronen, Jenni and published by Nordic Council of Ministers. This book was released on 2017-05-29 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: According to the EU Commission, the heating and cooling sector must sharply reduce its energy consumption and cut its use of fossil fuel in order to meet the EU's climate and energy goals. In the Nordic countries, a lot of effort has already been put to make heat production and consumption energy efficient and to decrease the emissions. To disseminate these experiences and good practices wider in Europe, and to identify further needs for co-operation, this study attempts to identify the common approaches of the Nordic countries towards the EU’s heating and cooling strategy and Winter Package regulation. This report describes the results of the work based on Pöyry’s analysis of the current heating and cooling sector practices and regulation in the Nordic countries, and interviews of the regulators and energy industry representatives from each country.
Download or read book Advanced Energy Efficiency Technologies for Solar Heating Cooling and Power Generation written by Xudong Zhao and published by . This book was released on 2019 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the research experience and outcomes of a group of international contributors, addresses a range of advanced energy efficiency technologies and their applications in solar heating, cooling and power generation, while also providing solutions for tackling recurring low efficiency problems in today's systems. It highlights the latest technologies and methods, which can significantly improve the performance of solar systems, enabling readers to design, construct and apply high-performance solar systems in or for their own projects. The contributors provide a systematic introduction to state-of-the-art energy efficiency technologies that demonstrates how to implement innovative solar systems. These technologies include: " heat pipes and loop heat pipes; " phase change materials (PCMs) and PCM slurries; " micro-channel panels; " desiccant/adsorption cycling; " ejector cooling and heat pumps; and " solar concentration and thermoelectric units. The book shows how innovative solar systems applicable to rural and urban buildings can be analysed and demonstrates the successful implementation of these advanced technologies. It delivers the design principles and associated energy performance assessment methods for a range of selected solar heating, cooling and power generation projects. This book offers a valuable source of information for final-year undergraduate students, as well as graduate students and academic lecturers, as it promotes the widespread deployment of advanced solar heating, cooling and power generation technologies applicable for buildings across the globe. The book is also a good point of reference for design engineers and energy consultants who wish to extend their knowledge of advanced technologies used to achieve energy efficiency.
Download or read book Advanced District Heating and Cooling DHC Systems written by Robin Wiltshire and published by Woodhead Publishing. This book was released on 2015-08-31 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced District Heating and Cooling (DHC) Systems presents the latest information on the topic, providing valuable information on the distribution of centrally generated heat or cold energy to buildings, usually in the form of space heating, cooling, and hot water. As DHC systems are more efficient and less polluting than individual domestic or commercial heating and cooling systems, the book provides an introduction to DHC, including its potential contribution to reducing carbon dioxide emissions, then reviews thermal energy generation for DHC, including fossil fuel-based technologies, those based on renewables, and surplus heat valorization. Final sections address methods to improve the efficiency of DHC. - Gives a comprehensive overview of DHC systems and the technologies and energy resources utilized within these systems - Analyzes the various methods used for harnessing energy to apply to DHC systems - Ideal resource for those interested in district cooling, teleheating, heat networks, distributed heating, thermal energy, cogeneration, combined heat and power, and CHP - Reviews the application of DHC systems in the field, including both the business model side and the planning needed to implement these systems
Download or read book District Heating and Cooling Program Overview Office of Buildings and Community Systems U S Department of Energy written by and published by . This book was released on 1988 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
