Download or read book Renewable Energy and Green Metallurgy Technology written by Xin Yao and published by . This book was released on 2024-03-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Special Issue is to immerse the reader in the latest green metallurgy technology. The production process in traditional metallurgical industry uses large amounts of fossil fuels, which consume energy and emit CO2 intensively, facing enormous challenges in energy and the environment. The industry is in urgent need of advanced techniques for replacing fossil fuels with renewable energy, and decreasing energy consumption and CO2 emission. Replacing fossil fuels with renewable energy, energy recovery, and advanced technology will lead to the development of the green metallurgical industry. In addition, the strengthening mechanisms and smelting processes of non-quenched and tempered steel for automobiles and high-nitrogen steel smelting technology will allow us to master the mechanism of green metallurgy production and decrease fossil fuel consumption and carbon dioxide emissions from the metallurgy process. The Special Issue mainly focuses on six selected topics, such as biomass energy and solar energy as replacements for fossil fuels, resource utilization of metallurgical slag, low-carbon smelting technology in steel, CO2 resource utilization, strengthening mechanisms and smelting processes of non-quenched and tempered steel for automobiles, high-nitrogen steel smelting technology, achieving green metallurgy production. The latest green metallurgy technology could provide the next direction for steel and iron production.
Download or read book Energy Technology 2023 written by Shafiq Alam and published by Springer Nature. This book was released on 2023-02-07 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clean and sustainable energy is of paramount importance for industrial activities, economic development, environment, and public welfare. Aiming to reach NetZero, researchers in both academia and industry as well as policymakers are now putting tremendous efforts into the generation, storage, and applications of clean energy. This collection focuses on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery, and emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal intensity and pollutants, and reduce carbon dioxide and other greenhouse emissions. Topics include, but are not limited to:• Energy efficient technologies for minerals, metals & materials processing • Clean energy technologies, such as biomass, solar, wind, geothermal, nuclear including SMRs, hydrogen, etc. • Renewable energy resources to reduce the consumption of traditional fossil fuels • Emerging technologies for renewable energy harvesting, conversion, and storage • New concepts or devices for energy generation, conversion, and distribution • Waste heat recovery and other industrial energy efficient technologies • Energy education and energy regulation • Scale-up, stability, and life-cycle analysis of energy technologies and improvement of existing energy-intensive processes • Theory and simulation in energy harvesting, conversion, and storage • Design, operation, and optimization of processes for energy generation (e.g., carbon capture) and conversion of energy carriers • Energy efficiency improvement in process engineering (e.g., for biomass conversion and improved combustion) and electrical engineering (e.g., for power conversion and developing smart grids) • Thermo-electric/electrolysis/photo-electrolysis/fundamentals of PV • Emission control, CO2 capture, and conversion • Carbon sequestration techniques • CO2 and other greenhouse gas reduction metallurgy in ferrous (iron & steel making and forming), non-ferrous and reactive metals including critical rare-earth metals • Sustainability and life cycle assessment of energy systems • Thermodynamics and modelling for sustainable metallurgical processes • 'Smart cool materials' for urban heat island mitigation (such as cool roof infrared reflecting material, and low-temperature heat absorbers for use in air conditioner condensers - like 'endothermic materials') • Methodologies for reducing the cost of energy materials production • Circular economy and developing resource efficiency model for cutting down the transport from remote places • Materials extraction and processing steps for enhancing energy efficiencies in batteries, supercapacitors, and energy efficient cells • Foundational industry (metals-alloys, chemicals, refractories, cement) and energy economy and role of mineral extraction
Download or read book Energy Technology 2020 Recycling Carbon Dioxide Management and Other Technologies written by Xiaobo Chen and published by Springer Nature. This book was released on 2020-01-15 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection addresses the pressing needs for sustainable technologies with reduced energy consumption and environmental pollutions and the development and application of alternative sustainable energy to maintain a green environment and efficient and long-lasting energy supply. Contributors represent both industry and academia and focus on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Authors also explore the valorization of materials and their embodied energy including byproducts or coproducts from ferrous and nonferrous industries, batteries, electronics, and other complex secondary materials.
Download or read book Energy Technology 2015 written by Animesh Jha and published by Springer. This book was released on 2016-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various technological aspects of sustainable energy ecosystems and processes that improve energy efficiency, and reduce and sequestrate carbon dioxide (CO2) and other greenhouse emissions. Papers emphasize the need for sustainable technologies in extractive metallurgy, materials processing and manufacturing industries with reduced energy consumption and CO2 emission. Industrial energy efficient technologies include innovative ore beneficiation, smelting technologies, recycling, and waste heat recovery. The book also contains contributions from all areas of non-nuclear and non-traditional energy sources, including renewable energy sources such as solar, wind, and biomass. Papers from the following symposia are presented in the book: Energy Technologies and Carbon Dioxide Management Recycling and Sustainability Update Magnetic Materials for Energy Applications V Sustainable Energy and Layered Double Hydroxides
Download or read book Primary Exploration of Hydrogen Metallurgy written by Jianliang Zhang and published by Springer Nature. This book was released on with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Energy written by M. A. Parvez Mahmud and published by Academic Press. This book was released on 2023-01-11 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Energy: A Sustainable Future looks at life cycle assessment theory, practice, and methodologies applied in renewable energy power plants. The state-of-the-art life cycle assessment methodologies applied in power generation units are discussed following LCA analysis and key findings from energy production processes. Providing fundamental knowledge of how to measure sustainability metrics using life cycle assessment in renewable power plants, this title outlines state-of-the-art research about LCA methodologies related to low-carbon energy systems, their outcome, and how to relate the sustainable power concept with a circular economy. With theoretical concepts of LCA applied in low-carbon power generation systems, outlining environmental impacts based on comprehensive examples and case studies in solar PV, solar thermal, hydropower plants and micro-grids, this book is of great interest to engineers, policy makers, researchers and academics in the area of electric power engineering. Consists of extensive and comprehensive life-cycle assessment examples and case studies for various renewable energy plants Enables power engineers to evaluate the sustainability index through environmental impact assessment in renewable power plants and micro-grids Includes assessment results showing future pathways for sustainability enhancement
Download or read book Sustainable and Green Electrochemical Science and Technology written by Keith Scott and published by John Wiley & Sons. This book was released on 2017-07-24 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable and Green Electrochemical Science and Technology brings together the basic concepts of electrochemical science and engineering and shows how these are applied in an industrial context, emphasising the major role that electrochemistry plays within society and industry in providing cleaner, greener and more sustainable technologies. Electrochemistry has many applications for sustainability; it can be used to store energy, synthesise materials and chemicals, to generate power and to recycle valuable resources. Coverage includes Electrochemistry, Electrocatalysis and Thermodynamics Electrochemical Cells, Materials and Reactors Carbon Dioxide Reduction and Electro-Organic Synthesis Hydrogen production and Water Electrolysis Inorganic Synthesis Electrochemical Energy Storage and Power Sources Electrochemical processes for recycling and resource recovery Fuel Cell Technologies This book is targeted at both industrial and academic readers, providing a good technological reference base for electrochemistry. It will enable the reader to build on basic principles of electrochemistry, and takes these through to cell design for various and diverse applications.
Download or read book Sustainability in the Mineral and Energy Sectors written by Sheila Devasahayam and published by CRC Press. This book was released on 2016-09-15 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable practices within the mining and energy sectors are assuming greater significance due to uncertainty and change within the global economy and safety, security, and health concerns. This book examines sustainability issues facing the mining and energy sectors by addressing six major themes: Mining and Mineral Processing; Metallurgy and Recycling; Environment; Energy; Socioeconomic and Regulatory; and Sustainable Materials and Fleets. Emphasizing an integrated transdisciplinary approach, it deliberates on optimizing mining productivity and energy efficiency and discusses integrated waste management practices. It discusses risk management, cost cutting, and integration of sustainable practices for long-term business value. It gives a comprehensive outlook for sustainable mineral futures from academic and industry perspectives covering mine to mill optimization, waste, risk and water management, improved efficiencies in mining tools and equipment, and performance indicators for sustainable developments. It covers how innovation and research underpin management of natural resources including sustainable carbon management. •Focuses on mining and mineral processing, metallurgy and recycling, the environment, energy, socioeconomic and regulatory issues, and sustainable materials and fleets. •Describes metallurgy and recycling and uses economic, environmental and social parameter analyses to identify areas for improvement in iron, steel, aluminium, lead, zinc, copper, and gold production. •Discusses current research on mining, performance indicators for sustainable development, sustainability in mining equipment, risk and safety management, and renewable energy resources •Covers alternative and conventional energy sources for the mineral sector as well water treatment and remediation and energy sustainability in mining. •Provides an overview of sustainable carbon management. •Offers an interdisciplinary approach with international focus.
Download or read book Fundamentals of Magnesium Alloy Metallurgy written by Mihriban O Pekguleryuz and published by Elsevier. This book was released on 2013-03-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and magnesium alloys offer a wealth of valuable properties, making them of great interest for use across a wide range of fields. This has led to extensive research focused on understanding the properties of magnesium and how these can be controlled during processing. Fundamentals of magnesium alloy metallurgy presents an authoritative overview of all aspects of magnesium alloy metallurgy, including physical metallurgy, deformation, corrosion and applications.Beginning with an introduction to the primary production of magnesium, the book goes on to discuss physical metallurgy of magnesium and thermodynamic properties of magnesium alloys. Further chapters focus on understanding precipitation processes of magnesium alloys, alloying behaviour of magnesium, and alloy design. The formation, corrosion and surface finishing of magnesium and its alloys are reviewed, before Fundamentals of magnesium alloy metallurgy concludes by exploring applications across a range of fields. Aerospace, automotive and other structural applications of magnesium are considered, followed by magnesium-based metal matrix composites and the use of magnesium in medical applications.With its distinguished editors and international team of expert contributors, Fundamentals of magnesium alloy metallurgy is a comprehensive tool for all those involved in the production and application of magnesium and its alloys, including manufacturers, welders, heat-treatment and coating companies, engineers, metallurgists, researchers, designers and scientists working with these important materials. Overviews all aspects of magnesium alloy metallurgy Discusses physical metallurgy of magnesium and thermodynamic properties of magnesium alloys Reviews the formation, corrosion and surface finishing of magnesium and its alloys
Download or read book Rare Earth Metal Recovery for Green Technologies written by Rajesh Kumar Jyothi and published by Springer. This book was released on 2021-03-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the development, use, extraction, and recovery of rare earth metals. Rare earth elements (REEs) occupy a key role in daily life in industrial applications. They are one of the critical elements for energy and sustainable growth. REEs are utilized in many modern electrical and electronic devices such as smart phones, computers, LED lights etc. Recovery of the REEs from secondary resources represents a way to meet the growing demand for electronic devices. Because of their rarity, utility, and importance, the recovery, utilization and recycling of rare earth metals is of utmost importance. This book presents both current methods of processing rare earths from primary and secondary sources and new, green routes for their isolation and purification. The book also addresses their utilization, re-use, reduction, and recycling policies that exist globally. Applications in metallurgy, magnets, ceramics, electronics, and chemical, optical, and nuclear technologies are discussed.
Download or read book The Rare Metals War written by Guillaume Pitron and published by . This book was released on 2023-02-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A celebrated international bestseller that exposes the ticking time-bomb underneath our new technological order. The resources race is on. Powering our digital lives and green technologies are some of the Earth's most precious metals -- but they are running out. And what will happen when they do? The green-tech revolution will reduce our reliance on nuclear power, coal, and oil, but by breaking free of fossil fuels, we are setting ourselves up for a new dependence -- on rare metals like cobalt, gold, and palladium. These are essential to electric vehicles, wind turbines, and solar panels, as well as our smartphones, computers, tablets, and other technologies. But we know very little about how rare metals are mined and traded, or their environmental, economic, and geopolitical costs -- until now.
Download or read book Advancements in Renewable Energy and Green Hydrogen written by Raboaca, Maria Simona and published by IGI Global. This book was released on 2024-04-26 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for sustainable energy solutions in rapidly evolving academic and industrial environments is at an all-time high. Challenges faced by those championing sustainability and energy solutions include the integration of green hydrogen, a clean and renewable energy carrier, into hybrid energy systems. Ensuring its traceability, certification, and efficient utilization creates an issue that academics, industry experts, and policymakers are struggling to solve. With the increasing importance of green hydrogen in reducing carbon emissions and addressing climate change, the need for a comprehensive guide to navigate this intricate territory is more pressing than ever. The Handbook of Research on Digitalization and Green Hydrogen Production is a groundbreaking book that provides a holistic and innovative approach to the challenges surrounding green hydrogen integration. It serves as a roadmap for academic scholars and industry professionals, providing deep insights into the various facets of green hydrogen, from production and storage to transportation and utilization. This book tackles the safety concerns associated with transporting green hydrogen and explores innovative technologies like Power-to-Gas-to-Power (P2G2P) and the conversion of hydrogen into ammonia. It also highlights the crucial role of standards and security regulations in ensuring the reliability of green hydrogen processes.
Download or read book Magnesium Technology 2014 written by Martyn Alderman and published by Springer. This book was released on 2016-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers in this collection represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. This volume covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications in such areas as hydrogen storage.
Download or read book Biomass and Carbon Fuels in Metallurgy written by Jaroslav Legemza and published by CRC Press. This book was released on 2019-12-19 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass and Carbon Fuels in Metallurgy presents contemporary and new insights into the use of carbonaceous (Biomass) fuels in the metallurgical sector. The authors describe application of these fuels in different technological processes to produce pig iron, steel and ferroalloys. Emphasis is placed on biomass and its metallurgical utilization. Coverage includes the specification of fuels, their classification and the characteristics of their basic properties. The use of carbonaceous fuels in the production of various kinds of agglomerates (ferriferous, manganese and metalized) is also covered. Key Features: Provides a comprehensive view of carbonaceous fuels in various metallurgy processes Details experiments conducted on the use of traditional and alternative (biomass) carbonaceous fuels for the production of agglomerates. Demonstrates that the energy potential of biomass can also be successfully used in pyrometallurgical processes Describes applications of biomass-based fuels in different technological processes for the production of pig iron, steel and ferroalloys. Coverage includes the specification of fuels, their classification and the characteristics of their basic properties.
Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.
Download or read book Fuelling the Future written by A. Mendez-Vilas and published by Universal-Publishers. This book was released on 2012-12-01 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book contains a selection of papers presented at The Energy & Materials Research Conference (EMR2012), which was held in Torremolinos, Málaga (Spain), during June 20th-22nd 2012."--p. ix.
Download or read book Integrating Green Chemistry and Sustainable Engineering written by Shahid ul-Islam and published by John Wiley & Sons. This book was released on 2019-04-01 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book covers the recent advances in sustainable technologies and developments, and describes how green chemistry and engineering practices are being applied and integrated in various industrial sectors. Over the past decade, the population explosion, rise in global warming, depletion of fossil fuel resources and environmental pollution have been the major driving force for promoting and implementing the principles of green chemistry and sustainable engineering in all sectors ranging from chemical to environmental sciences. It plays a growing role in the chemical processing industries. Green chemistry and engineering are relatively new areas focused on minimizing generations of pollution by utilizing alternative feedstocks, developing, selecting, and using less environmentally harmful solvents, finding new synthesis pathways, improving selectivity in reactions, generating less waste, avoiding the use of highly toxic compounds, and much more. In an effort to advance the discussion of green chemistry and engineering, this book contains 19 chapters describing greener approaches to the design and development of processes and products. The contributors describe the production of third generation biofuels, sustainable and economic production of hydrogen by water splitting using solar energy, efficient energy harvesting, mechanisms involved in the conversion of biomass, green nanocomposites, bio-based polymers, ionic liquids as green solvents, sustainable nitrogen fixation, bioremediation, and much more. The book aims at motivating chemists and engineers, as well as postgraduate and PhD students and postdocs to pay attention to an acute need for the implementation of green chemistry principles in the field of chemical engineering, biomedical engineering, agriculture, environmental engineering, chemical processing and material sciences.
