Download or read book Reinforced Concrete Flat Plates Under Lateral Loading written by Austin P. Pan and published by . This book was released on 1988 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Experimental Study of Flat plate Structures Under Vertical and Lateral Loads written by Shyh-Jiann Hwang and published by . This book was released on 1994 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Punching of Structural Concrete Slabs written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Punching is considered to be one of the most difficult problems in structural concrete design and mechanical models or theoretical analyses were developed rather late in the history of concrete research attempts. This fib Bulletin reviews the development of design models and theoretical analyses since the CEB Bulletin 168 Punching Shear in Reinforced Concrete - State-of-the-Art Report published in 1985. The role of the concrete tensile strength was specially addressed. In this respect the present bulletin is also following-up the CEB Bulletin 237 Concrete Tension and Size Effects - Utilisation of concrete tension in structural concrete design and relevance of size effect - Contributions from CEB Task Group 2.7 published in 1997. Apart from new theoretical developments a comprehensive databank for comparisons with experimental evidence is included. About 400 punching tests were critically reviewed and evaluated in a consistent manner. This is thought to be the first step towards a generally agreed selection of reliable tests. The evident value of such a data bank is illustrated by comparisons carried out between the data and some of the analytical proposals as well as empirical code formulas. List of contents : (1) Introduction, (2) Code equations, (3) Mechanical models for punching, (4) New developments for mechanical models, (5) Numerical investigations, (7) Comparison of mechanical models and test results of slabs without shear reinforcement, (8) Comparison of code rules and tests of flat slabs without shear reinforcement, (9) Comparison of codes, models and tests of flat slabs with shear reinforcement, (10) Experimental investigations, (11) Summary and conclusions, References, Appendices : (I) Databank on slabs without shear reinforcement, (II) Databank on slabs with shear reinforcement, (III) Comparison of test data with code rules, (IV) Comparison of test data with selected models, (V) Notations.
Download or read book Challenges Opportunities and Solutions in Structural Engineering and Construction written by Nader Ghafoori and published by CRC Press. This book was released on 2009-10-29 with total page 1890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges, Opportunities and Solutions in Structural Engineering and Construction addresses the latest developments in innovative and integrative technologies and solutions in structural engineering and construction, including: Concrete, masonry, steel and composite structures; Dynamic impact and earthquake engineering; Bridges and
Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 1989-08-31 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Punching shear of structural concrete slabs written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2017 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 81 reports the latest information available to researchers and practitioners on the analysis, design and experimental evidence of punching shear of structural concrete slabs. It follows previous efforts by the International Federation for Structural Concrete (fib) and its predecessor the Euro-International Committee for Concrete (CEB), through CEB Bulletin 168, Punching Shear in Reinforced Concrete (1985) and fibBulletin 12, Punching of structural concrete slabs (2001), and an international symposium sponsored by the punching shear subcommittee of ACI Committee 445 (Shear and Torsion) and held in Kansas City, Mo., USA, in 2005. This bulletin contains 18 papers that were presented in three sessions as part of an international symposium held in Philadelphia, Pa., USA, on October 25, 2016. The symposium was co-organized by the punching shear sub-committee of ACI 445 and by fib Working Party 2.2.3 (Punching and Shear in Slabs) with the objectives of not only disseminating information on this important design subject but also promoting harmonization among the various design theories and treatment of key aspects of punching shear design. The papers are organized in the same order they were presented in the symposium. The symposium honored Professor Emeritus Neil M. Hawkins (University of Illinois at Urbana-Champaign, USA), whose contributions through the years in the field of punching shear of structural concrete slabs have been paramount. The papers cover key aspects related to punching shear of structural concrete slabs under different loading conditions, the study of size effect on punching capacity of slabs, the effect of slab reinforcement ratio on the response and failure mode of slabs, without and with shear reinforcement, and its implications for the design and formulation in codes of practice, an examination of different analytical tools to predict the punching shear response of slabs, the study of the post-punching response of concrete slabs, the evaluation of design provisions in modern codes based on recent experimental evidence and new punching shear theories, and an overview of the combined efforts undertaken jointly by ACI 445 and fib WP 2.2.3 to generate test result databanks for the evaluation and calibration of punching shear design recommendations in North American and international codes of practice.
Download or read book Lateral Response of Nonseismically Detailed Reinforced Concrete Flat Slab Structures written by Laurel M. Dovich and published by Ann Arbor, Mich. : University Microfilms International. This book was released on 1994 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theories and Applications of Plate Analysis written by Rudolph Szilard and published by John Wiley & Sons. This book was released on 2004-01-02 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by a renowned structural engineer offers comprehensive coverage of both static and dynamic analysis of plate behavior, including classical, numerical, and engineering solutions. It contains more than 100 worked examples showing step by step how the various types of analysis are performed.
Download or read book ADVANCED REINFORCED CONCRETE DESIGN written by P. C. VARGHESE and published by PHI Learning Pvt. Ltd.. This book was released on 2009-01-09 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended as a companion volume to the author's Limit State Design of Reinforced Concrete (published by Prentice-Hall of India), the Second Edition of this comprehensive and systematically organized text builds on the strength of the first edition, continuing to provide a clear and masterly exposition of the fundamentals of the theory of concrete design. The text meets the twin objective of catering to the needs of the postgraduate students of Civil Engineering and the needs of the practising civil engineers as it focuses also on the practices followed by the industry. This text, along with Limit State Design, covers the entire design practice of revised Code IS456 (2000). In addition, it analyzes the procedures specified in many other BIS codes such as those on winds, earthquakes, and ductile detailing. What's New to This Edition Chapter 18 on Earthquake Forces and Structural Response of framed buildings has been completely revised and updated so as to conform to the latest I.S. Codes 1893 (2002) entitled Criteria for Earthquake Resistant Design of Structures (Part I - Fifth Revision). Chapters 19 and 21 which too deal with earthquake design have been revised. A Summary of elementary design of reinforced concrete members is added as Appendix. Valuable tables and charts are presented to help students and practising designers to arrive at a speedy estimate of the steel requirements in slabs, beams, columns and footings of ordinary buildings.
Download or read book Tubular Structures XI written by JeffreyA. Packer and published by Routledge. This book was released on 2017-10-02 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This topical book contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the "11th International Symposium and IIW International Conference on Tubular Structures". The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: novel applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members, earthquake resistance, specification and code developments, material properties and structural reliability, impact resistance and brittle fracture, fire resistance, casting and fabrication innovations. Research and development issues presented in this book are applicable to buildings, bridges, offshore structures, entertainment rides, cranes, towers and various mechanical and agricultural equipment. This book is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students. The conference presentations herein include two keynote lectures (the International Institute of Welding Houdremont Lecture and the ISTS Kurobane Lecture), plus finalists in the CIDECT Student Papers Competition. The 11th International Symposium and IIW International Conference on Tubular Structures – ISTS11 – took place in Québec City, Canada from August 31 to September 2, 2006.
Download or read book Reinforced Concrete Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2009-12-14 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the world of concrete as it applies to the construction of buildings, Reinforced Concrete Design of Tall Buildings provides a practical perspective on all aspects of reinforced concrete used in the design of structures, with particular focus on tall and ultra-tall buildings. Written by Dr. Bungale S. Taranath, this work explains t
Download or read book Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision written by Robby Caspeele and published by CRC Press. This book was released on 2018-10-31 with total page 3160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.
Download or read book Practical Design of Reinforced Concrete Buildings written by Syed Mehdi Ashraf and published by CRC Press. This book was released on 2017-11-10 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide comprehensive, practical knowledge for the design of reinforced concrete buildings. The approach will be unique as it will focus primarily on the design of various structures and structural elements as done in design offices with an emphasis on compliance with the relevant codes. It will give an overview of the integrated design of buildings and explain the design of various elements such as slabs, beams, columns, walls, and footings. It will be written in easy-to-use format and refer to all the latest relevant American codes of practice (IBC and ASCE) at every stage. The book will compel users to think critically to enhance their intuitive design capabilities.
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1986 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Facilities Engineering Handbook written by United States. National Aeronautics and Space Administration and published by . This book was released on 1974 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
