Download or read book Regularized Predictive Control Framework for Robust Dynamic Legged Locomotion written by Gerardo Bledt and published by . This book was released on 2020 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legged robots have the potential to be highly dynamic machines capable of outperforming humans and animals in executing locomotion tasks within dangerous and unstructured environments. Unfortunately, current control methods still lack the ability to move with the agility and robustness needed to traverse arbitrary terrains with the same grace and reliability as animals. This dissertation presents the successful implementation of a novel nonlinear optimization-based Regularized Predictive Control (RPC) framework that optimizes robot states, footstep locations, and ground reaction forces over a future prediction horizon. RPC exploits expertly designed and data-driven extracted heuristics by directly embedding them in the optimization through regularization in the cost function. Well-designed regularization should bias results towards a "good enough" heuristic solution by shaping the cost space favorably, while allowing the optimization to find a better result if it exists. However, designing meaningful regularized cost functions and adequate heuristics is challenging and not straightforward. A novel framework is presented for automatically extracting and designing new principled legged locomotion heuristics by fitting simple intuitive models to simulated and experimental data using RPC. Statistically correlated relationships between desired commands, robot states, and optimal control inputs are found by allowing the optimization to more exhaustively search the cost space during offline explorations when not subjected to real-time computation constraints. This method extracts simple, but powerful heuristics that can approximate complex dynamics and account for errors stemming from model simplifications or parameter uncertainty without the loss of physical intuition. Nonlinear optimization-based controllers have shown improved capabilities in simulation, but fall short when implemented on hardware systems that must adhere to real-time computation constraints and physical limits. Various methods and algorithms critical to the success of the robot were developed to overcome these challenges. The controller is verified experimentally using the MIT Cheetah 3 and Mini Cheetah robot platforms. Results demonstrate the ability of the robot to track dynamic velocity and turn rate commands with a variety of parametrized gaits, remain upright through large impulsive and sustained disturbances, and traverse highly irregular terrains. All of these behaviors are achieved with no modifications to the controller structure and with one set of gains signifying the generalized robustness of RPC. This work represents a step towards more robust dynamic locomotion capabilities for legged robots.
Download or read book Policy Regularized Model Predictive Control Framework for Robust Legged Locomotion written by Gerardo Bledt and published by . This book was released on 2018 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel Policy Regularized Model Predictive Control (PR-MPC) framework is developed to allow general robust legged locomotion with the MIT Cheetah quadruped robot. The full system is approximated by a simple control model that retains the key nonlinearities characteristic to legged contact dynamics while reducing the complexity of the continuous dynamics. Nominal footstep locations and feedforward forces for controlling the robot's center of mass are designed from simple physics-based heuristics for steady state legged movement. By regularizing the predictive optimization with these policies, we can exploit the known dynamics of the system to bias the controller towards the steady state gait while remaining free to explore the cost space during transient behaviors and disturbances. The nonlinear optimization makes use of direct collocation on the simplified dynamics to pose the problem with a highly sparse structure for fast computation. A generalized approach to the controller design is independent from specific gait pattern and reference policy and allows stabilization of aperiodic locomotion. Simulation results show dynamic capabilities in a variety of gaits including trotting, bounding, and galloping, all without changing the set of algorithm parameters between experiments. Robustness to sensor and input noise, large push disturbances, and unstructured terrain demonstrate the ability of the predictive controller to adapt to uncertainty.
Download or read book Hybrid Control and Motion Planning of Dynamical Legged Locomotion written by Nasser Sadati and published by John Wiley & Sons. This book was released on 2012-09-11 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need in the field for a comprehensive review of motion planning algorithms and hybrid control methodologies for complex legged robots. Introducing a multidisciplinary systems engineering approach for tackling many challenges posed by legged locomotion, the book provides engineering detail including hybrid models for planar and 3D legged robots, as well as hybrid control schemes for asymptotically stabilizing periodic orbits in these closed-loop systems. Complete with downloadable MATLAB code of the control algorithms and schemes used in the book, this book is an invaluable guide to the latest developments and future trends in dynamical legged locomotion.
Download or read book Actuation Aware Simplified Dynamic Models for Robotic Legged Locomotion written by Romeo Orsolino and published by Istitituto Italiano di Tecnologia (IIT). This book was released on 2019-02-14 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent years, we witnessed an ever increasing number of successful hardware implementations of motion planners for legged robots. If one common property is to be identified among these real-world applications, that is the ability of performing online (re)planning. Online planning is forgiving, in the sense that it allows to relentlessly compensate for external disturbances of whatever form they might be, ranging from unmodeled dynamics to external pushes or unexpected obstacles and, at the same time, follow user commands. Initially replanning was restricted only to heuristic-based planners that exploit the low computational effort of simplified dynamic models. Such models deliberately only capture the main dynamics of the system, thus leaving to the controllers the issue of anchoring the desired trajectory to the whole body model of the robot. In recent years, however, a number of novel Model Predictive Control (MPC) approaches have been presented that attempt to increase the accuracy of the obtained solutions by employing more complex dynamic formulations, this without trading-off the computational efficiency of simplified models. In this dissertation, as an example of successful hardware implementation of heuristics and simplified model-based locomotion, I first describe the control framework that I developed for the generation of an omni-directional bounding gait for the HyQ quadruped robot. By analyzing the stable limit cycles for the sagittal dynamics and the Center of Pressure (CoP) for the lateral stabilization, the described locomotion framework is able to achieve a stable bounding gait while adapting the footsteps to terrains of mild roughness and to sudden changes of the user desired linear and angular velocities. The next topic reported and second contribution of this dissertation is my effort to formulate more descriptive simplified dynamic models, without compromising their computational efficiency, in order to extend the navigation capabilities of legged robots to complex geometry environments. With this in mind, I investigated the possibility of incorporating feasibility constraints in these template models and, in particular, I focused on the joint-torque limits, which are usually neglected at the planning stage. Along the same direction, the third contribution discussed in this thesis is the formulation of the so called actuation wrench polytope (AWP), defined as the set of feasible wrenches that an articulated robot can perform given its actuation limits. Interesected with the contact wrench cone (CWC), this yields a new 6D polytope that we name feasible wrench polytope (FWP), defined as the set of all wrenches that a legged robot can realize given its actuation capabilities and the friction constraints. Results are reported where, thanks to efficient computational geometry algorithms and to appropriate approximations, the FWP is employed for a one-step receding horizon optimization of center of mass trajectory and phase durations given a predefined step sequence on rough terrains. In order to augment the robot’s reachable workspace, I then decided to trade off the generality of the FWP formulation for a suboptimal scenario in which a quasi-static motion is assumed. This led to the definition of a new concept that I refer to under the name of feasible region. This can be seen as a different variant of 2D linear subspaces orthogonal to gravity where the robot is guaranteed to place its own center of mass (CoM) while being able to carry its own body weight given its actuation capabilities. The feasible region provides an intuitive tool for the visualization in 2D of the actuation capabilities of legged robots. The low dimensionality of the feasible region also enables the concurrent online optimization of actuation consistent CoM trajectories and target foothold locations on rough terrains, which can hardly be achieved with other state-of-the-art approaches.
Download or read book Bioinspired Legged Locomotion written by Maziar Ahmad Sharbafi and published by Butterworth-Heinemann. This book was released on 2017-11-21 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioinspired Legged Locomotion: Models, Concepts, Control and Applications explores the universe of legged robots, bringing in perspectives from engineering, biology, motion science, and medicine to provide a comprehensive overview of the field. With comprehensive coverage, each chapter brings outlines, and an abstract, introduction, new developments, and a summary. Beginning with bio-inspired locomotion concepts, the book's editors present a thorough review of current literature that is followed by a more detailed view of bouncing, swinging, and balancing, the three fundamental sub functions of locomotion. This part is closed with a presentation of conceptual models for locomotion. Next, the book explores bio-inspired body design, discussing the concepts of motion control, stability, efficiency, and robustness. The morphology of legged robots follows this discussion, including biped and quadruped designs. Finally, a section on high-level control and applications discusses neuromuscular models, closing the book with examples of applications and discussions of performance, efficiency, and robustness. At the end, the editors share their perspective on the future directions of each area, presenting state-of-the-art knowledge on the subject using a structured and consistent approach that will help researchers in both academia and industry formulate a better understanding of bioinspired legged robotic locomotion and quickly apply the concepts in research or products. Presents state-of-the-art control approaches with biological relevance Provides a thorough understanding of the principles of organization of biological locomotion Teaches the organization of complex systems based on low-dimensional motion concepts/control Acts as a guideline reference for future robots/assistive devices with legged architecture Includes a selective bibliography on the most relevant published articles
Download or read book Applied Optimal Control for Dynamically Stable Legged Locomotion written by Russell L. Tedrake and published by . This book was released on 2004 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Online learning and controller adaptation will be an essential component for legged robots in the next few years as they begin to leave the laboratory setting and join our world. I present the first example of a learning system which is able to quickly and reliably acquire a robust feedback control policy for 3D dynamic bipedal walking from a blank slate using only trials implemented on the physical robot. The robot begins walking within a minute and learning converges in approximately 20 minutes. The learning works quickly enough that the robot is able to continually adapt to the terrain as it walks. This success can be attributed in part to the mechanics of our robot, which is capable of stable walking down a small ramp even when the computer is turned off. In this thesis, I analyze the dynamics of passive dynamic walking, starting with reduced planar models and working up to experiments on our real robot. I describe, in detail, the actor-critic reinforcement learning algorithm that is implemented on the return map dynamics of the biped. Finally, I address issues of scaling and controller augmentation using tools from optimal control theory and a simulation of a planar one-leg hopping robot. These learning results provide a starting point for the production of robust and energy efficient walking and running robots that work well initially, and continue to improve with experience.
Download or read book Hierarchical Controller for Highly Dynamic Locomotion Utilizing Pattern Modulation and Impedance Control written by Jongwoo Lee (S.M.) and published by . This book was released on 2013 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a hierarchical control algorithm for quadrupedal locomotion. We address three challenges in developing a controller for high-speed running: locomotion stability, control of ground reaction force, and coordination of four limbs. To tackle these challenges, the proposed algorithm employs three strategies. Leg impedance control provides programmable virtual compliance of each leg which achieve self-stability in locomotion. The four legs exert forces to the ground using equilibrium-point hypothesis. A gait pattern modulator imposes a desired footfall sequence. The control algorithm is verified in a dynamic simulator constructed using MATLAB and then in the subsequent experiments on the MIT Cheetah robot. The experiments on the MIT Cheetah robot demonstrates high speed trot running reaching up to the speed of 6 m/s on a treadmill. This speed corresponds to a Froude number (Fr = 7.34), which is comparatively higher than other existing quadrupedal robots.
Download or read book Proceedings of 2022 Chinese Intelligent Systems Conference written by Yingmin Jia and published by Springer Nature. This book was released on 2022-09-26 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 18th Chinese Intelligent Systems Conference, CISC 2022, which was held during October 15–16, 2022, in Beijing, China. The papers in these proceedings deal with various topics in the field of intelligent systems and control, such as multi-agent systems, complex networks, intelligent robots, complex system theory and swarm behavior, event-triggered control and data-driven control, robust and adaptive control, big data and brain science, process control, intelligent sensor and detection technology, deep learning and learning control guidance, navigation and control of aerial vehicles.
Download or read book Fast Sensing and Adaptive Actuation for Robust Legged Locomotion written by An Mo and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust legged locomotion in complex terrain demands fast perturbation detection and reaction. In animals, due to the neural transmission delays, the high-level control loop involving the brain is absent from mitigating the initial disturbance. Instead, the low-level compliant behavior embedded in mechanics and the mid-level controllers in the spinal cord are believed to provide quick response during fast locomotion. Still, it remains unclear how these low- and mid-level components facilitate robust locomotion. This thesis aims to identify and characterize the underlining elements responsible for fast sensing and actuation. To test individual elements and their interplay, several robotic systems were implemented. The implementations include active and passive mechanisms as a combination of elasticities and dampers in multi-segment robot legs, central pattern generators inspired by intraspinal controllers, and a synthetic robotic version of an intraspinal sensor. The first contribution establishes the notion of effective damping. Effective damping is defined as the total energy dissipation during one step, which allows quantifying how much ground perturbation is mitigated. Using this framework, the optimal damper is identified as viscous and tunable. This study paves the way for integrating effective dampers to legged designs for robust locomotion. The second contribution introduces a novel series elastic actuation system. The proposed system tackles the issue of power transmission over multiple joints, while featuring intrinsic series elasticity. The design is tested on a hopper with two more elastic elements, demonstrating energy recuperation and enhanced dynamic performance. The third contribution proposes a novel tunable damper and reveals its influence on legged hopping. A bio-inspired slack tendon mechanism is implemented in parallel with a spring. The tunable damping is rigorously quantified on a central-pattern-generator-driven hopping robot, which reveals the trade-off between locomotion robustness and efficiency. The last contribution explores the intraspinal sensing hypothesis of birds. We speculate that the observed intraspinal structure functions as an accelerometer. This accelerometer could provide fast state feedback directly to the adjacent central pattern generator circuits, contributing to birds' running robustness. A biophysical simulation framework is established, which provides new perspectives on the sensing mechanics of the system, including the influence of morphologies and material properties. Giving an overview of the hierarchical control architecture, this thesis investigates the fast sensing and actuation mechanisms in several control layers, including the low-level mechanical response and the mid-level intraspinal controllers. The contributions of this work provide new insight into animal loco-motion robustness and lays the foundation for future legged robot design.
Download or read book Legged Robots that Balance written by Marc H. Raibert and published by MIT Press. This book was released on 1986 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, by a leading authority on legged locomotion, presents exciting engineering and science, along with fascinating implications for theories of human motor control. It lays fundamental groundwork in legged locomotion, one of the least developed areas of robotics, addressing the possibility of building useful legged robots that run and balance. The book describes the study of physical machines that run and balance on just one leg, including analysis, computer simulation, and laboratory experiments. Contrary to expectations, it reveals that control of such machines is not particularly difficult. It describes how the principles of locomotion discovered with one leg can be extended to systems with several legs and reports preliminary experiments with a quadruped machine that runs using these principles. Raibert's work is unique in its emphasis on dynamics and active balance, aspects of the problem that have played a minor role in most previous work. His studies focus on the central issues of balance and dynamic control, while avoiding several problems that have dominated previous research on legged machines. Marc Raibert is Associate Professor of Computer Science and Robotics at Carnegie-Mellon University and on the editorial board of The MIT Press journal, Robotics Research. Legged Robots That Balanceis fifteenth in the Artificial Intelligence Series, edited by Patrick Winston and Michael Brady.
Download or read book Learning Motor Skills written by Jens Kober and published by Springer. This book was released on 2013-11-23 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in reinforcement learning applied to robotics both in terms of novel algorithms and applications. It discusses recent approaches that allow robots to learn motor. skills and presents tasks that need to take into account the dynamic behavior of the robot and its environment, where a kinematic movement plan is not sufficient. The book illustrates a method that learns to generalize parameterized motor plans which is obtained by imitation or reinforcement learning, by adapting a small set of global parameters and appropriate kernel-based reinforcement learning algorithms. The presented applications explore highly dynamic tasks and exhibit a very efficient learning process. All proposed approaches have been extensively validated with benchmarks tasks, in simulation and on real robots. These tasks correspond to sports and games but the presented techniques are also applicable to more mundane household tasks. The book is based on the first author’s doctoral thesis, which won the 2013 EURON Georges Giralt PhD Award.
Download or read book The Symbolic Species The Co evolution of Language and the Brain written by Terrence W. Deacon and published by W. W. Norton & Company. This book was released on 1998-04-17 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A work of enormous breadth, likely to pleasantly surprise both general readers and experts."—New York Times Book Review This revolutionary book provides fresh answers to long-standing questions of human origins and consciousness. Drawing on his breakthrough research in comparative neuroscience, Terrence Deacon offers a wealth of insights into the significance of symbolic thinking: from the co-evolutionary exchange between language and brains over two million years of hominid evolution to the ethical repercussions that followed man's newfound access to other people's thoughts and emotions. Informing these insights is a new understanding of how Darwinian processes underlie the brain's development and function as well as its evolution. In contrast to much contemporary neuroscience that treats the brain as no more or less than a computer, Deacon provides a new clarity of vision into the mechanism of mind. It injects a renewed sense of adventure into the experience of being human.
Download or read book Exact and Approximate Modeling of Linear Systems written by Ivan Markovsky and published by SIAM. This book was released on 2006-01-31 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exact and Approximate Modeling of Linear Systems: A Behavioral Approach elegantly introduces the behavioral approach to mathematical modeling, an approach that requires models to be viewed as sets of possible outcomes rather than to be a priori bound to particular representations. The authors discuss exact and approximate fitting of data by linear, bilinear, and quadratic static models and linear dynamic models, a formulation that enables readers to select the most suitable representation for a particular purpose. This book presents exact subspace-type and approximate optimization-based identification methods, as well as representation-free problem formulations, an overview of solution approaches, and software implementation. Readers will find an exposition of a wide variety of modeling problems starting from observed data. The presented theory leads to algorithms that are implemented in C language and in MATLAB.
Download or read book The Playful Machine written by Ralf Der and published by Springer Science & Business Media. This book was released on 2012-01-11 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous robots may become our closest companions in the near future. While the technology for physically building such machines is already available today, a problem lies in the generation of the behavior for such complex machines. Nature proposes a solution: young children and higher animals learn to master their complex brain-body systems by playing. Can this be an option for robots? How can a machine be playful? The book provides answers by developing a general principle---homeokinesis, the dynamical symbiosis between brain, body, and environment---that is shown to drive robots to self- determined, individual development in a playful and obviously embodiment- related way: a dog-like robot starts playing with a barrier, eventually jumping or climbing over it; a snakebot develops coiling and jumping modes; humanoids develop climbing behaviors when fallen into a pit, or engage in wrestling-like scenarios when encountering an opponent. The book also develops guided self-organization, a new method that helps to make the playful machines fit for fulfilling tasks in the real world. The book provides two levels of presentation. Students and scientific researchers interested in the field of robotics, self-organization and dynamical systems theory may be satisfied by the in-depth mathematical analysis of the principle, the bootstrapping scenarios, and the emerging behaviors. But the book additionally comes with a robotics simulator inviting also the non- scientific reader to simply enjoy the fabulous world of playful machines by performing the numerous experiments.
Download or read book Rigid Body Dynamics Algorithms written by Roy Featherstone and published by Springer. This book was released on 2014-11-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rigid Body Dynamics Algorithms presents the subject of computational rigid-body dynamics through the medium of spatial 6D vector notation. It explains how to model a rigid-body system and how to analyze it, and it presents the most comprehensive collection of the best rigid-body dynamics algorithms to be found in a single source. The use of spatial vector notation greatly reduces the volume of algebra which allows systems to be described using fewer equations and fewer quantities. It also allows problems to be solved in fewer steps, and solutions to be expressed more succinctly. In addition algorithms are explained simply and clearly, and are expressed in a compact form. The use of spatial vector notation facilitates the implementation of dynamics algorithms on a computer: shorter, simpler code that is easier to write, understand and debug, with no loss of efficiency.
Download or read book Model Predictive Control in the Process Industry written by Eduardo F. Camacho and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control is an important technique used in the process control industries. It has developed considerably in the last few years, because it is the most general way of posing the process control problem in the time domain. The Model Predictive Control formulation integrates optimal control, stochastic control, control of processes with dead time, multivariable control and future references. The finite control horizon makes it possible to handle constraints and non linear processes in general which are frequently found in industry. Focusing on implementation issues for Model Predictive Controllers in industry, it fills the gap between the empirical way practitioners use control algorithms and the sometimes abstractly formulated techniques developed by researchers. The text is firmly based on material from lectures given to senior undergraduate and graduate students and articles written by the authors.
Download or read book Artificial Intelligence Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-12-12 with total page 3095 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ongoing advancements in modern technology have led to significant developments in artificial intelligence. With the numerous applications available, it becomes imperative to conduct research and make further progress in this field. Artificial Intelligence: Concepts, Methodologies, Tools, and Applications provides a comprehensive overview of the latest breakthroughs and recent progress in artificial intelligence. Highlighting relevant technologies, uses, and techniques across various industries and settings, this publication is a pivotal reference source for researchers, professionals, academics, upper-level students, and practitioners interested in emerging perspectives in the field of artificial intelligence.
