Download or read book Reformate Production from Naphtha Cost Analysis Reformate E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Aromatic Reformate production from naphtha using a semi-regeneration process. The process examined is similar to UOP RZ Platforming process. In this process, hydrogen is generated as by-product. This report was developed based essentially on the following reference(s): "Aromatics", Encyclopedia of Hydrocarbons, Volume II, 2006 Keywords: Fixed Bed, Reformer, Benzene, Toluene, Aromatics, Reforming Process

Download or read book Hydrogen via Light Naphtha Reforming Cost Analysis Hydrogen E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Hydrogen production from light naphtha. The process examined is a typical steam reforming process. This report was developed based essentially on the following reference(s): "Hydrogen", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: H2, Water-gas Shifting, Reformer

Download or read book Catalytic naphtha reforming science and technology written by George J. Parera Antos (Jose M.Aitani, Abdullah M) and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Management of Energy environment Systems written by Wesley K. Foell and published by John Wiley & Sons. This book was released on 1979 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comporison of the geman democratic republic. A methodology for constructing and modeling energy/environment futures. Alternative energy/environment futures for rhone-alpes prologue: The wisconsin scenarios in retrospect. Alternative energy/environment futures for wisconsin. Cross-regional comparison of energy/environment futures.

Download or read book Storage Stability of Fuels written by Krzysztof Biernat and published by BoD – Books on Demand. This book was released on 2015-02-04 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis of the results of studies of motor fuels ageing, conducted in laboratory and model conditions, in terms of building a system operating on-line, allowing continuous assessment of the operational usability of gasoline and diesel fuels, including those containing the addition of ethanol and FAME, respectively. This research was carried out in the framework of the project: "A system for the continuous control of the degree and rate of the liquid fuels ageing process during storage, which received co-funding from the European Regional Development Fund under the Operational Programme "Innovative Economy". The book presents an evaluation of the impact of fuel production processes on its stability and an analysis of changes in normative parameters of fuels during their storage and use. The book presents also the results of tests on the corrosive effects of fuels during storage processes. This project was co-financed by the European Regional Development Fund under the Operational Programme "Innovative Economy".

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.

Download or read book Advances in Petrochemicals written by Vivek Patel and published by BoD – Books on Demand. This book was released on 2015-09-30 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petrochemical industry is an important area in our pursuits for economic growth, employment generation, and basic needs. It is a huge field that encompasses many commercial petrochemical and polymer-enabled products. The book is designed to help the reader, particularly students and researchers of petroleum science and engineering, to understand synthesis, processing, mechanics, and simulation of the petroleum processes. The selection of topics addressed and the examples, tables, and graphs used to illustrate them are governed, to a large extent, by the fact that this book is aimed primarily at petroleum science and engineering technologists. Undoubtedly, this book contains must read materials for students, engineers, and researchers working in the area of petrochemicals and petroleum and provides valuable insights into the related synthesis, processing, mechanisms, and simulation. This book is concise, self-explanatory, informative, and cost-effective.

Download or read book Perspectives on Deep Sea Mining written by Rahul Sharma and published by Springer Nature. This book was released on 2022-01-13 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a sequel to ’Deep-Sea Mining: Resource Potential, Technical and Environmental Considerations’ (2017) and ‘Environmental Issues of Deep-Sea Mining: Impacts, Consequences and Policy Perspectives’ (2019), and aims to provide a comprehensive volume on different perspectives of deep-sea mining from specialists around the world. The work is timely, as deep-sea minerals continue to enthuse researchers involved in activities such as ascertaining their potential as alternative sources for critical metals for green energy and other industrial applications, as well as technology development for their sustainable exploration and exploitation, while addressing environmental concerns. With a steady increase in the number of contractors having exclusive rights over large tracts of seafloor in the ‘Area’, i.e. area beyond national jurisdictions, the International Seabed Authority, mandated with the responsibility of regulating such activities, is in the process of developing a code for exploitation of deep-sea minerals. These, coupled with growing interest among private entrepreneurs, investment companies and policy makers, underscore the need for updated information to be made available in one place on the subject of deep-sea mining. The book evaluates the potential and sustainability of mining for deep-sea minerals compared to other land-based deposits, the technologies needed for mining and processing of ores, the approach towards environmental monitoring and management, as well as the regulatory frameworks and legal challenges to manage deep-sea mining activities. The book is expected to serve as an important reference for all stakeholders including researchers, contractors, mining companies, regulators and NGOs involved in deep-sea mining.

Download or read book Scientific Investigations Report written by Sharon E. Kroening and published by . This book was released on 2004 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications

Download or read book Reformate Production from Naphtha Cost Analysis Reformate E23A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Reformate production from naphtha using a continuous catalyst regeneration process. The process examined is similar to UOP CCR Platforming process. In this process, liquefied petroleum gas (LPG) is generated as by-product. This report was developed based essentially on the following reference(s): US Patent 8900442 and US Patent 4325806, both issued to UOP in 2014 and 1982, respectively Keywords: Catalytic Reforming, Reformer, Gravity Flowing Catalyst, BTX, Aromatics, Hydrotreater

Download or read book Chemical Reaction Engineering written by Martin Schmal and published by CRC Press. This book was released on 2014-04-04 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reaction Engineering: Essentials, Exercises and Examples presents the essentials of kinetics, reactor design and chemical reaction engineering for undergraduate students. Concise and didactic in its approach, it features over 70 resolved examples and many exercises.The work is organized in two parts: in the first part kinetics is presented

Download or read book Reformate Production from Naphtha Cost Analysis Reformate E22A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Aromatic Reformate production from naphtha using a catalytic reforming process. The process examined is similar to Chevron Phillips Aromax process. In this process, hydrogen is generated as by-product. This report was developed based essentially on the following reference(s): US Patent 4,645,586, issued to Chevron Chemical in 1987 Keywords: Reformer, BTX, CP Chem, Fixed Bed Reforming, Toluene, On-Purpose Benzene Production

Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. - Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications - Highly visual full color graphics facilitate understanding of materials concepts and properties - Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process - For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com - Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: - Text and figures have been revised and updated throughout - The number of worked examples has been increased by 50% - The number of standard end-of-chapter exercises in the text has been doubled - Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology

Download or read book Hydrogen Power Theoretical and Engineering Solutions written by T.O. Saetre and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains selected contributions to the second Hydrogen Power, Theoretical and Engineering Solutions, International Symposium (HYPOTHESIS II), held in Grimstad, Norway, from 18 to 22 August 1997. The scientific programme included 10 oral sessions and a poster session. Widely based national committees, supported by an International Scientific Advisory Board and the International Coordinators, made every effort to design and bring together a programme of great excellence. The more than one hundred papers submitted represent the efforts of research groups from all over the World. The international character of HYPOTHESIS II has been augmented by contributions coming from seven countries outside Europe. The contributions reflect the progress that has been achieved in hydrogen technology aimed primarily at hydrogen as the ultimate energy vector. This research have already yielded mature technologies for mass production in many areas. These and future results will be of increased interest and importance as global and local environmental issues move higher up the political agenda. In order to facilitate new contacts between scientists and strengthen existing ones, the symposium incorporated an extensive social program managed by the Conference Administrator, Ms. Ann Y stad.