Download or read book Reference Free CMOS Pipeline Analog to Digital Converters written by Michael Figueiredo and published by Springer Science & Business Media. This book was released on 2012-08-24 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows that digitally assisted analog to digital converters are not the only way to cope with poor analog performance caused by technology scaling. It describes various analog design techniques that enhance the area and power efficiency without employing any type of digital calibration circuitry. These techniques consist of self-biasing for PVT enhancement, inverter-based design for improved speed/power ratio, gain-of-two obtained by voltage sum instead of charge redistribution, and current-mode reference shifting instead of voltage reference shifting. Together, these techniques allow enhancing the area and power efficiency of the main building blocks of a multiplying digital-to-analog converter (MDAC) based stage, namely, the flash quantizer, the amplifier, and the switched capacitor network of the MDAC. Complementing the theoretical analyses of the various techniques, a power efficient operational transconductance amplifier is implemented and experimentally characterized. Furthermore, a medium-low resolution reference-free high-speed time-interleaved pipeline ADC employing all mentioned design techniques and circuits is presented, implemented and experimentally characterized. This ADC is said to be reference-free because it precludes any reference voltage, therefore saving power and area, as reference circuits are not necessary. Experimental results demonstrate the potential of the techniques which enabled the implementation of area and power efficient circuits.

Download or read book High Resolution and High Speed Integrated CMOS AD Converters for Low Power Applications written by Weitao Li and published by Springer. This book was released on 2017-08-01 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a step-by-step tutorial on how to design a low-power, high-resolution (not less than 12 bit), and high-speed (not less than 200 MSps) integrated CMOS analog-to-digital (AD) converter, to respond to the challenge from the rapid growth of IoT. The discussion includes design techniques on both the system level and the circuit block level. In the architecture level, the power-efficient pipelined AD converter, the hybrid AD converter and the time-interleaved AD converter are described. In the circuit block level, the reference voltage buffer, the opamp, the comparator, and the calibration are presented. Readers designing low-power and high-performance AD converters won’t want to miss this invaluable reference. Provides an in-depth introduction to the newest design techniques for the power-efficient, high-resolution (not less than 12 bit), and high-speed (not less than 200 MSps) AD converter; Presents three types of power-efficient architectures of the high-resolution and high-speed AD converter; Discusses the relevant circuit blocks (i.e., the reference voltage buffer, the opamp, and the comparator) in two aspects, relaxing the requirements and improving the performance.

Download or read book Analysis and Design of Pipeline Analog to Digital Converters written by Yun Chiu and published by Springer-Verlag New York Incorporated. This book was released on 2006-01-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a treatment of the subject of the pipeline analog-to-digital converter (ADC), this book emphasizes implementation techniques using CMOS switched-capacitor circuits. The core materials of the textbook include architecture, circuit building blocks, practical limitations, consideration of precision, and calibration techniques.

Download or read book CMOS Data Converters for Communications written by Mikael Gustavsson and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Data Converters for Communications distinguishes itself from other data converter books by emphasizing system-related aspects of the design and frequency-domain measures. It explains in detail how to derive data converter requirements for a given communication system (baseband, passband, and multi-carrier systems). The authors also review CMOS data converter architectures and discuss their suitability for communications. The rest of the book is dedicated to high-performance CMOS data converter architecture and circuit design. Pipelined ADCs, parallel ADCs with an improved passive sampling technique, and oversampling ADCs are the focus for ADC architectures, while current-steering DAC modeling and implementation are the focus for DAC architectures. The principles of the switched-current and the switched-capacitor techniques are reviewed and their applications to crucial functional blocks such as multiplying DACs and integrators are detailed. The book outlines the design of the basic building blocks such as operational amplifiers, comparators, and reference generators with emphasis on the practical aspects. To operate analog circuits at a reduced supply voltage, special circuit techniques are needed. Low-voltage techniques are also discussed in this book. CMOS Data Converters for Communications can be used as a reference book by analog circuit designers to understand the data converter requirements for communication applications. It can also be used by telecommunication system designers to understand the difficulties of certain performance requirements on data converters. It is also an excellent resource to prepare analog students for the new challenges ahead.

Download or read book CMOS Telecom Data Converters written by Angel Rodríguez-Vázquez and published by Springer Science & Business Media. This book was released on 2004-01-31 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Telecom Data Converters compiles the latest achievements regarding the design of high-speed and high-resolution data converters in deep submicron CMOS technologies. The four types of analog-to-digital converter architectures commonly found in this arena are covered, namely sigma-delta, pipeline, folding/interpolating and flash. For all these types, latest achievements regarding the solution of critical architectural and circuital issues are presented, and illustrated through IC prototypes with measured state-of-the-art performances. Some of these prototypes are conceived to be employed at the chipset of newest generation wireline modems (ADSL and ADSL+). Others are intended for wireless transceivers. Besides analog-to-digital converters, the book also covers other functions needed for communication systems, such as digital-to-analog converters, analog filters, programmable gain amplifiers, digital filters, and line drivers.

Download or read book CMOS Integrated Analog to Digital and Digital to Analog Converters written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters describes in depth converter specifications like Effective Number of Bits (ENOB), Spurious Free Dynamic Range (SFDR), Integral Non-Linearity (INL), Differential Non-Linearity (DNL) and sampling clock jitter requirements. Relations between these specifications and practical issues like matching of components and offset parameters of differential pairs are derived. CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters describes the requirements of input and signal reconstruction filtering in case a converter is applied into a signal processing system. CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters describes design details of high-speed A/D and D/A converters, high-resolution A/D and D/A converters, sample-and-hold amplifiers, voltage and current references, noise-shaping converters and sigma-delta converters, technology parameters and matching performance, comparators and limitations of comparators and finally testing of converters.

Download or read book Integrated Analog To Digital and Digital To Analog Converters written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog-to-digital (A/D) and digital-to-analog (D/A) converters provide the link between the analog world of transducers and the digital world of signal processing, computing and other digital data collection or data processing systems. Several types of converters have been designed, each using the best available technology at a given time for a given application. For example, high-performance bipolar and MOS technologies have resulted in the design of high-resolution or high-speed converters with applications in digital audio and video systems. In addition, high-speed bipolar technologies enable conversion speeds to reach the gigaHertz range and thus have applications in HDTV and digital oscilloscopes. Integrated Analog-to-Digital and Digital-to-Analog Converters describes in depth the theory behind and the practical design of these circuits. It describes the different techniques to improve the accuracy in high-resolution A/D and D/A converters and also special techniques to reduce the number of elements in high-speed A/D converters by repetitive use of comparators. Integrated Analog-to-Digital and Digital-to-Analog Converters is the most comprehensive book available on the subject. Starting from the basic elements of theory necessary for a complete understanding of the design of A/D and D/A converters, this book describes the design of high-speed A/D converters, high-accuracy D/A and A/D converters, sample-and-hold amplifiers, voltage and current reference sources, noise-shaping coding and sigma-delta converters. Integrated Analog-to-Digital and Digital-to-Analog Converters contains a comprehensive bibliography and index and also includes a complete set of problems. This book is ideal for use in an advanced course on the subject and is an essential reference for researchers and practicing engineers.

Download or read book High Performance AD and DA Converters IC Design in Scaled Technologies and Time Domain Signal Processing written by Pieter Harpe and published by Springer. This book was released on 2014-07-23 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 23rd workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, serving as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book A New Family of CMOS Cascode Free Amplifiers with High Energy Efficiency and Improved Gain written by Ricardo Filipe Sereno Póvoa and published by Springer. This book was released on 2018-08-10 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need for energy-efficient amplifiers, providing gain enhancement strategies, suitable to run in parallel with lower supply voltages, by introducing a new family of single-stage cascode-free amplifiers, with proper design, optimization, fabrication and experimental evaluation. The authors describe several topologies, using the UMC 130 nm CMOS technology node with standard-VT devices, for proof-of-concept, achieving results far beyond what is achievable with a classic single-stage folded-cascode amplifier. Readers will learn about a new family of circuits with a broad range of applications, together with the familiarization with a state-of-the-art electronic design automation methodology used to explore the design space of the proposed circuit family.

Download or read book Pipelined Analog to Digital Converter and Fault Diagnosis written by Alok Barua and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipelined architecture analog-to-digital converters (ADCs) have become the architecture of choice for high speed and moderate to high resolution devices. Subsequently, different techniques of the fault diagnosis by built in self-test (BIST) system have been developed. This book gives a rigorous, theoretical and mathematical analysis for the design of pipelined ADCs, along with detailed practical aspects of implementing it in very large-scale integration (VLSI). In each chapter a unique fault diagnosis technique for pipelined ADC has been proposed. Chapter 1 discusses a 1.8V 10-bit 500 mega samples-per-second parallel pipelined ADC, describing the design of high speed, low power, low voltage ADC in CMOS technology. Chapter 2 introduces a BIST system where both the circuit and its diagnosis tool are implemented on the same chip. Chapter 3 examines the design of an oscillation-based BIST system for a 1.8V 8-bit 125-mega samples per second pipelined ADC. Chapter 4 focuses on the evaluation of dynamic parameters of a pipelined ADC with an oscillation-based BIST. Chapter 5 covers reconfigurable BIST architecture for pipelined ADCs. The book is an ideal reference for graduate students and researchers within electrical, electronics and computer engineering.

Download or read book Low Power High Resolution Analog to Digital Converters written by Amir Zjajo and published by Springer Science & Business Media. This book was released on 2010-10-29 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the fast advancement of CMOS fabrication technology, more and more signal-processing functions are implemented in the digital domain for a lower cost, lower power consumption, higher yield, and higher re-configurability. This has recently generated a great demand for low-power, low-voltage A/D converters that can be realized in a mainstream deep-submicron CMOS technology. However, the discrepancies between lithography wavelengths and circuit feature sizes are increasing. Lower power supply voltages significantly reduce noise margins and increase variations in process, device and design parameters. Consequently, it is steadily more difficult to control the fabrication process precisely enough to maintain uniformity. The inherent randomness of materials used in fabrication at nanoscopic scales means that performance will be increasingly variable, not only from die-to-die but also within each individual die. Parametric variability will be compounded by degradation in nanoscale integrated circuits resulting in instability of parameters over time, eventually leading to the development of faults. Process variation cannot be solved by improving manufacturing tolerances; variability must be reduced by new device technology or managed by design in order for scaling to continue. Similarly, within-die performance variation also imposes new challenges for test methods. In an attempt to address these issues, Low-Power High-Resolution Analog-to-Digital Converters specifically focus on: i) improving the power efficiency for the high-speed, and low spurious spectral A/D conversion performance by exploring the potential of low-voltage analog design and calibration techniques, respectively, and ii) development of circuit techniques and algorithms to enhance testing and debugging potential to detect errors dynamically, to isolate and confine faults, and to recover errors continuously. The feasibility of the described methods has been verified by measurements from the silicon prototypes fabricated in standard 180nm, 90nm and 65nm CMOS technology.

Download or read book Performance Optimization Techniques in Analog Mixed Signal and Radio Frequency Circuit Design written by Fakhfakh, Mourad and published by IGI Global. This book was released on 2014-10-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving the performance of existing technologies has always been a focal practice in the development of computational systems. However, as circuitry is becoming more complex, conventional techniques are becoming outdated and new research methodologies are being implemented by designers. Performance Optimization Techniques in Analog, Mix-Signal, and Radio-Frequency Circuit Design features recent advances in the engineering of integrated systems with prominence placed on methods for maximizing the functionality of these systems. This book emphasizes prospective trends in the field and is an essential reference source for researchers, practitioners, engineers, and technology designers interested in emerging research and techniques in the performance optimization of different circuit designs.

Download or read book Pipelined Analog to digital Conversion Using Class AB Amplifiers written by Kyung Ryun Kim and published by Stanford University. This book was released on 2010 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: In high-performance pipelined analog-to-digital converters (ADCs), the residue amplifiers dissipate the majority of the overall converter power. Therefore, finding alternatives to the relatively inefficient, conventional class-A circuit realization is an active area of research. One option for improvement is to employ class-AB amplifiers, which can, in principle, provide large drive currents on demand and improve the efficiency of residue amplification. Unfortunately, due to the simultaneous demand for high speed and high gain in pipelined ADCs, the improvements seen in class-AB designs have so far been limited. This dissertation presents the design of an efficient class-AB amplification scheme based on a pseudo-differential, single-stage and cascode-free architecture. Nonlinear errors due to finite DC gain are addressed using a deterministic digital background calibration that measures the circuit imperfections in time intervals between normal conversion cycles of the ADC. As a proof of concept, a 12-bit 30-MS/s pipelined ADC was realized using class-AB amplifiers with the proposed digital calibration. The prototype ADC occupies an active area of 0.36 mm2 in 90-nm CMOS. It dissipates 2.95 mW from a 1.2-V supply and achieves an SNDR of 64.5 dB for inputs near the Nyquist frequency. The corresponding figure of merit is 72 fJ/conversion-step.

Download or read book Modular Low Power High Speed CMOS Analog to Digital Converter of Embedded Systems written by Keh-La Lin and published by Springer Science & Business Media. This book was released on 2006-01-14 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main trends of microelectronics is toward design for integrated systems, i.e., system-on-a-chip (SoC) or system-on-silicon (SoS). Due to this development, design techniques for mixed-signal circuits become more important than before. Among other devices, analog-to-digital and digital-to-analog converters are the two bridges between the analog and the digital worlds. Besides, low-power design technique is one of the main issues for embedded systems, especially for hand-held applications. Modular Low-Power, High-Speed CMOS Analog-to-Digital Converter for Embedded Systems aims at design techniques for low-power, high-speed analog-to-digital converter processed by the standard CMOS technology. Additionally this book covers physical integration issues of A/D converter integrated in SoC, i.e., substrate crosstalk and reference voltage network design.

Download or read book Data Conversion Handbook written by Walt Kester and published by Newnes. This book was released on 2005 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete update of a classic handbook originally created by Analog Devices and never previously published offers the most complete and up-to-date reference available on data conversion, from the world authority on the subject. It describes in depth the theory behind and the practical design of data conversion circuits. It describes the different architectures used in A/D and D/A converters - including many advances that have been made in this technology in recent years - and provides guidelines on which types are best suited for particular applications. It covers error characterization and testing specifications, essential design information that is difficult to find elsewhere. The book also contains a wealth of practical application circuits for interfacing and supporting A/D and D/A converters within an electronic system. In short, everything an electronics engineer needs to know about data converters can be found in this volume, making it an indispensable reference with broad appeal. The accompanying CD-ROM provides software tools for testing and analyzing data converters as well as a searchable pdf version of the text. * brings together a huge amount of information impossible to locate elsewhere. * many recent advances in converter technology simply aren't covered in any other book. * a must-have design reference for any electronics design engineer or technician

Download or read book High Speed Analog to Digital Conversion written by Michael J. Demler and published by Elsevier. This book was released on 2012-12-02 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the theory and applications of high-speed analog-to-digital conversion. An analog-to-digital converter takes real-world inputs (such as visual images, temperature readings, and rates of speed) and transforms them into digital form for processing by computer. This book discusses the design and uses of such circuits, with particular emphasis on improving the speed of the conversion process and the accuracy of its output--how well the output is a corresponding digital representation of the output*b1input signal. As computers become increasingly interfaced to the outside world, "ADC" techniques will become ever more important.

Download or read book Physical Model and Applications of High Efficiency Electro Optical Conversion Devices Volume II written by Feng Chi and published by Frontiers Media SA. This book was released on 2023-03-31 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: