Download or read book Methods of Measuring Moisture in Building Materials and Structures written by Lars-Olof Nilsson and published by Springer. This book was released on 2018-04-13 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: RILEM TC 248-MMB was established in 2012 with the main aim to improve and distribute knowledge related to moisture measurement in construction materials in various scientific and industrial applications. Properties and performance of building materials and structures are influenced to a large extent by the moisture conditions in the materials. Obvious examples are heat conductivity, shrinkage and creep, transport properties, most types of deterioration, discoloration etc. For research and applications the moisture conditions must be quantified, by measurements in the laboratory or under field conditions. There is much variation in methods being used, even within the same topic, in different countries, both with regard to materials and to applications. No consensus whatsoever does exist. For the construction industry it is important to be able to quantify the moisture conditions in an accurate way in various applications. This state-of-the-art report is divided into two parts, Principles and Applications, with altogether 28 chapters on various moisture measuring principles and a number of applications.
Download or read book Internal Corrosion of Water Distribution Systems 2 Edition written by American Water Works Association and published by American Water Works Association. This book was released on 1996 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference for engineers, consultants, and public administration officials is recognized as the most complete, practical guide to water pipe corrosion, its health effects, and how to control it.
Download or read book Transport and Interactions of Chlorides in Cement based Materials written by Caijun Shi and published by CRC Press. This book was released on 2019-07-26 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chloride-induced corrosion is the most important durability issue of reinforced concrete structures, and the prediction and prevention of chloride-induced corrosion has attracted considerable interest all over the world. Given that chloride penetrates through the concrete cover, the issues concerning its transport are crucial. These include testing methods, prediction, and the prevention of ingress. During the transport process, physical and chemical interaction occurs between chloride and cement hydrates, which in turn affects the further transport, so the transport of chloride and these interactions are closely related and underpin our understanding of chloride-induced corrosion in RC structures. This book provides in-depth discussion of chloride transport and its interaction in cement-based materials, and reviews and summarizes the state of the art. The mechanisms and testing methods for chloride transport, chemical interactions of chloride with cement hydrates, chloride binding isotherms, measurement of penetration depths, factors affecting chloride transport, and modeling of chloride transport are discussed in detail. This book serves as a reference for researchers or engineer, and a textbook for graduate students.
Download or read book Molecular Simulation on Cementitious Materials From Computational Chemistry Method to Application written by Dongshuai Hou and published by Frontiers Media SA. This book was released on 2022-02-09 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cement Based Materials for Nuclear Waste Storage written by Florence Bart and published by Springer Science & Business Media. This book was released on 2012-08-16 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the re-emergence of nuclear power as an acceptable energy source on an international basis continues, the need for safe and reliable ways to dispose of radioactive waste becomes ever more critical. The ultimate goal for designing a predisposal waste-management system depends on producing waste containers suitable for storage, transportation and permanent disposal. Cement-Based Materials for Nuclear-Waste Storage provides a roadmap for the use of cementation as an applied technique for the treatment of low- and intermediate-level radioactive wastes. Coverage includes, but is not limited to, a comparison of cementation with other solidification techniques, advantages of calcium-silicate cements over other materials and a discussion of the long-term suitability and safety of waste packages as well as cement barriers.
Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.
Download or read book Pore Structure of Cement Based Materials written by Kalliopi K. Aligizaki and published by CRC Press. This book was released on 2005-09-22 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pore Structure of Cement-Based Materials provides a thorough treatment of the experimental techniques used to characterize the pore structure of materials. The text presents the principles and practical applications of the techniques used, organized in an easy-to-follow and uncomplicated manner, providing the theoretical background, the way to anal
Download or read book International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement based Materials and Concrete Structures written by Agnieszka Jędrzejewska and published by Springer Nature. This book was released on 2023-06-08 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advances, innovations, and applications in cement-based materials (CBM) and concrete structures, as presented by leading international researchers and engineers at the International RILEM Conference on synergizing expertise toward sustainability and robustness of CBM and concrete structures (SynerCrete), held in Milos Island, Greece, on June 14-16, 2023. The aim of the conference was to discuss and arouse progress in research, development, and application of CBM and structural concrete through combination of expertise from distinct fields of knowledge, such as performance-based design, 3D modeling for analysis/design, building information modeling, and even robotics, while keeping focus on multiscale approaches at time and spatial levels. It covers a diverse range of topics concerning alternative concrete formulations for adaptation to climate change, performance-based and multiphysics/multiscale design and innovative testing, structural health monitoring and maintenance management, integral BIM-based planning, and resource-responsible building. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations. The two volumes encompass more than 200 original contributions in the field.
Download or read book Corrosion of Steel in Concrete written by Luca Bertolini and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel-reinforced concrete is used ubiquitously as a building material due to its unique combination of the high compressive strength of concrete and the high tensile strength of steel. Therefore, reinforced concrete is an ideal composite material that is used for a wide range of applications in structural engineering such as buildings, bridges, tunnels, harbor quays, foundations, tanks and pipes. To ensure durability of these structures, however, measures must be taken to prevent, diagnose and, if necessary, repair damage to the material especially due to corrosion of the steel reinforcement. The book examines the different aspects of corrosion of steel in concrete, starting from basic and essential mechanisms of the phenomenon, moving up to practical consequences for designers, contractors and owners both for new and existing reinforced and prestressed concrete structures. It covers general aspects of corrosion and protection of reinforcement, forms of attack in the presence of carbonation and chlorides, problems of hydrogen embrittlement as well as techniques of diagnosis, monitoring and repair. This second edition updates the contents with recent findings on the different topics considered and bibliographic references, with particular attention to recent European standards. This book is a self-contained treatment for civil and construction engineers, material scientists, advanced students and architects concerned with the design and maintenance of reinforced concrete structures. Readers will benefit from the knowledge, tools, and methods needed to understand corrosion in reinforced concrete and how to prevent it or keep it within acceptable limits.
Download or read book Introduction to Urban Water Distribution Second Edition written by Nemanja Trifunovic and published by CRC Press. This book was released on 2020-08-31 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Urban Water Distribution comprises the core training material used in the Master of Science programme in Urban Water and Sanitation at IHE Delft Institute for Water Education. Participants in this programme are professionals working in the water and sanitation sector from over forty, predominantly developing, countries from all parts of the world. Outside this diverse audience, the most appropriate readers are those who know little or nothing about the subject. However, experts dealing with advanced problems can also use it as a refresher of their knowledge, as well as the teachers in this field may like to use some of the contents in their educational programmes. The general focus in the book is on understanding the steady-state hydraulics that forms the basis of hydraulic design and computer modelling applied in water distribution. The main purpose of the workshop problems and three computer exercises is to develop a temporal and spatial perception of the main hydraulic parameters in the system for given layout and demand scenarios. Furthermore, the book contains a detailed discussion on water demand, which is a fundamental element of any network analysis, and general principles of network construction, operation and maintenance. The book includes nearly 700 illustrations and the accompanying electronic materials contain all the spreadsheet applications and the network model files used in solving the workshop problems and computer exercises. This book is the first volume of the Introduction to Urban Water Distribution, 2nd Edition set.
Download or read book Structure and Performance of Cements Second Edition written by P. Barnes and published by CRC Press. This book was released on 2002-11-01 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing together a multinational team of authors, this second edition of Structure and Performance of Cements highlights the latest global advances in the field of cement technology. Three broad categories are covered: basic materials and methods, cement extenders, and techniques of examination. Within these categories consideration has been given to environmental issues such as the use of waste materials in cement-burning as supplementary fuels and new and improved methods of instrumentation for examining structural aspects and performance of cements. This book also covers cement production, mineralogy and hydration, as well as the mechanical properties of cement, and the corrosion and durability of cementitious systems. Special cements are included, along with calcium aluminate and blended cements together with a consideration of the role of gypsum in cements. Structure and Performance of Cements is an invaluable key reference for academics, researchers and practitioners alike.
Download or read book Final Report written by David W. DeBerry and published by . This book was released on 1982 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cementitious Materials written by Herbert Pöllmann and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aside from water the materials which are used by mankind in highest quantities arecementitious materials and concrete. This book shows how the quality of the technical product depends on mineral phases and their reactions during the hydration and strengthening process. Additives and admixtures infl uence the course of hydration and the properties. Options of reducing the CO2-production in cementitious materials are presented and numerous examples of unhydrous and hydrous phases and their formation conditions are discussed. This editorial work consists of four parts including cement composition and hydration, Special cement and binder mineral phases, Cementitious and binder materials, and Measurement and properties. Every part contains different contributions and covers a broad range within the area. Contents Part I: Cement composition and hydration Diffraction and crystallography applied to anhydrous cements Diffraction and crystallography applied to hydrating cements Synthesis of highly reactive pure cement phases Thermodynamic modelling of cement hydration: Portland cements – blended cements – calcium sulfoaluminate cements Part II: Special cement and binder mineral phases Role of hydrotalcite-type layered double hydroxides in delayed pozzolanic reactions and their bearing on mortar dating Setting control of CAC by substituted acetic acids and crystal structures of their calcium salts Crystallography and crystal chemistry of AFm phases related to cement chemistry Part III: Cementitious and binder materials Chemistry, design and application of hybrid alkali activated binders Binding materials based on calcium sulphates Magnesia building material (Sorel cement) – from basics to application New CO2-reduced cementitious systems Composition and properties of ternary binders Part IV: Measurement and properties Characterization of microstructural properties of Portland cements by analytical scanning electron microscopy Correlating XRD data with technological properties No cement production without refractories
Download or read book Lea s Chemistry of Cement and Concrete written by Peter Hewlett and published by Elsevier. This book was released on 2003-11-12 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.
Download or read book Performance of Cement Based Materials in Aggressive Aqueous Environments written by Mark Alexander and published by Springer Science & Business Media. This book was released on 2012-12-18 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete and cement-based materials must operate in increasingly aggressive aqueous environments, which may be either natural or industrial. These materials may suffer degradation in which ion addition and/or ion exchange reactions occur, leading to a breakdown of the matrix microstructure and consequent weakening. Sometimes this degradation can be extremely rapid and serious such as in acidic environments, while in other cases degradation occurs over long periods. Consequences of material failure are usually severe – adversely affecting the health and well-being of human communities and disturbing ecological balances. There are also large direct costs of maintaining and replacing deteriorated infrastructure and indirect costs from loss of production during maintenance work, which place a great burden on society. The focus of this book is on addressing issues concerning performance of cement-based materials in aggressive aqueous environments , by way of this State-of-the-Art Report. The book represents the work of many well-known and respected authors who contributed chapters or parts of chapters. Four main themes were addressed: I. Nature and kinetics of degradation and deterioration mechanisms of cement-based materials in aggressive aqueous environments, II. Modelling of deterioration in such environments, III. Test methods to assess performance of cement-based materials in such environments, and which can be used to characterise and rate relative performance and inform long term predictions, IV. Engineering implications and consequences of deterioration in aggressive aqueous environments, and engineering approaches to the problem.
Download or read book Introduction to Urban Water Distribution written by Nemanja Trifunovic and published by CRC Press. This book was released on 2006-03-09 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing primarily on understanding the steady-state hydraulics that form the basis of hydraulic design and computer modelling applied in water distribution, Introduction to Urban Water Distribution elaborates the general principles and practices of water distribution in a straightforward way. The workshop problems and design exercise develop a tem
Download or read book Self Healing Phenomena in Cement Based Materials written by Mario de Rooij and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-healing materials are man-made materials which have the built-in capability to repair damage. Failure in materials is often caused by the occurrence of small microcracks throughout the material. In self-healing materials phenomena are triggered to counteract these microcracks. These processes are ideally triggered by the occurrence of damage itself. Thus far, the self-healing capacity of cement-based materials has been considered as something "extra". This could be called passive self-healing, since it was not a designed feature of the material, but an inherent property of it. Centuries-old buildings have been said to have survived these centuries because of the inherent self-healing capacity of the binders used for cementing building blocks together. In this State-of-the-Art Report a closer look is taken at self-healing phenomena in cement-based materials. It is shown what options are available to design for this effect rather than have it occur as a "coincidental extra".
