Download or read book New Trends in Removal of Heavy Metals from Industrial Wastewater written by Maulin P. Shah and published by Elsevier. This book was released on 2021-04-23 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Trends in Removal of Heavy Metals from Industrial Wastewater covers the applicable technologies relating to the removal of heavy metals from wastewater and new and emerging trends in the field, both at the laboratory and industrial scale. Sections explore new environmentally friendly technologies, the principles of sustainable development, the main factors contributing to heavy metal removal from wastewater, methods and procedures, materials (especially low-cost materials originated from industrial and agricultural waste), management of wastewater containing heavy metals and wastewater valorization, recycling, environmental impact, and wastewater policies for post heavy metal removal. This book is an advanced and updated vision of existing heavy metal removal technologies with their limitations and challenges and their potential application to remove heavy metals/environmental pollutants through advancements in bioremediation. Finally, sections also cover new trends and advances in environmental bioremediation with recent developments in this field by an application of chemical/biochemical and environmental biotechnology. - Outlines the fate and occurrence of heavy metals in Wastewater Treatment Plants (WWTPs) and potential approaches for their removal - Describes the techniques currently available for removing heavy metals from wastewater - Discusses the emerging technologies in heavy metal removal - Covers biological treatments to remove heavy metals - Includes the valorization of heavy metal containing wastewater
Download or read book Biohydrometallurgical Recycling of Metals from Industrial Wastes written by Hong Hocheng and published by CRC Press. This book was released on 2017-09-11 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many available metal recycling methods are simple and fast, they are also expensive and cause environmental pollution. Biohydrometallurgical processing of metals offers an alternative to overcome these issues, as the use of biological means not only helps to conserve dwindling ore resources but also fulfills the need for the unambiguous need to extract metals in nonpolluting, low-energy, and low-cost way. This book covers biohydrometallurgy and its application in the recovery of metals from secondary sources like wastes. It aims to provide readers with a comprehensive overview of different wastes for metal recovery and biological treatment methods that are both environmentally friendly and economically viable.
Download or read book Biological Treatment of Industrial Wastewater written by Maulin P. Shah and published by Royal Society of Chemistry. This book was released on 2021-12-03 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological Treatment of Industrial Wastewater presents a comprehensive overview of the latest advances and trends in the use of bioreactors for treating industrial wastewater.
Download or read book Environmental Materials and Waste written by Majeti Narasimha Vara Prasad and published by Academic Press. This book was released on 2016-04-19 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Materials and Waste: Resource Recovery and Pollution Prevention contains the latest information on environmental sustainability as a wide variety of natural resources are increasingly being exploited to meet the demands of a worldwide growing population and economy. These raw materials cannot, or can only partially, be substituted by renewable resources within the next few decades. As such, the efficient recovery and processing of mineral and energy resources, as well as recycling such resources, is now of significant importance. The book takes a multidisciplinary approach to fully realize the number of by-products which can be remanufactured, providing the foundation needed across disciplines to tackle this issue. As awareness and opportunities to recover valuable resources from process and bleed streams is gaining interest, sustainable recovery of environmental materials, including wastewater, offers tremendous opportunity to combine profitable and sustainable production. - Presents a state-of-the-art guide to environmental sustainability - Provides an overview of the field highlighting recent and emerging issues in environmental resource recovery that cover a wide array of by-products for remanufacture potential - Details a multidisciplinary approach to fully realize the number of by-products which can be remanufactured, providing the foundation needed across disciplines to tackle these global issues
Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2005-03-11 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.
Download or read book Heavy Metals in the Environment written by Lawrence K. Wang and published by CRC Press. This book was released on 2009-06-23 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful modern heavy metal control program for any industry will include not only traditional water pollution control, but also air pollution control, soil conservation, site remediation, groundwater protection, public health management, solid waste disposal, and combined industrial-municipal heavy metal waste management. In fact, it should be
Download or read book Methods for Bioremediation of Water and Wastewater Pollution written by Inamuddin and published by Springer Nature. This book was released on 2020-10-05 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced techniques for wastewater treatment and the chapters review the environmental impact of water pollution, the analysis of water quality, and technologies for the preservation of water resources. Also outlined in this volume is the bioremediation of heavy metals, dyes, bisphenols, phthalates, cyanobacteria in contaminated water and wastewater. Another focus of this book is the use of natural remediation techniques such as bacterial biofilms and enzymes.
Download or read book Decontamination of Heavy Metals written by Jiaping Paul Chen and published by CRC Press. This book was released on 2012-12-18 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy metals, such as lead, chromium, cadmium, zinc, copper, and nickel, are important constituents of most living organisms, as well as many nonliving substances. Some heavy metals are essential for growth of biological and microbiological lives, yet their presence in excessive quantities is harmful to humans and interferes with many environmental
Download or read book Metals in Wastes written by Karolina Wieszczycka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-07-23 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals in Wastes is an excellent guide for scientists, students, engineers, chemists, and industrial chemists who are looking for knowledge of the main sources of metals in industrial wastes. Metals are valuable materials that can be recycled again and again without degrading their properties. The recycling of metals enables us to preserve natural resources while requiring less energy to process than the manufacture of new products using virgin raw materials. A team of experts reviews the state-of-the-art and provides the readers not only with a comprehensive in-depth overview of the main composition of wastes but also discloses innovative methods which have been applied for recovery of critical and valuable metals in petrochemical industry, rubber, energy and automotive industries. This know-how could be considered as a useful reference tool for moving towards the zero-waste economy. Additionally, the book describes the economic aspects of metals recovery from various sources. This is essential for those already involved in the metals business and also for the financial, investment and advisory community internationally.
Download or read book High Tech Trash written by Elizabeth Grossman and published by Island Press. This book was released on 2006-05-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Digital Age was expected to usher in an era of clean production, an alternative to smokestack industries and their pollutants. But as environmental journalist Elizabeth Grossman reveals in this penetrating analysis of high tech manufacture and disposal, digital may be sleek, but it's anything but clean. Deep within every electronic device lie toxic materials that make up the bits and bytes, a complex thicket of lead, mercury, cadmium, plastics, and a host of other often harmful ingredients. High Tech Trash is a wake-up call to the importance of the e-waste issue and the health hazards involved. Americans alone own more than two billion pieces of high tech electronics and discard five to seven million tons each year. As a result, electronic waste already makes up more than two-thirds of the heavy metals and 40 percent of the lead found in our landfills. But the problem goes far beyond American shores, most tragically to the cities in China and India where shiploads of discarded electronics arrive daily. There, they are "recycled"-picked apart by hand, exposing thousands of workers and community residents to toxics. As Grossman notes, "This is a story in which we all play a part, whether we know it or not. If you sit at a desk in an office, talk to friends on your cell phone, watch television, listen to music on headphones, are a child in Guangdong, or a native of the Arctic, you are part of this story." The answers lie in changing how we design, manufacture, and dispose of high tech electronics. Europe has led the way in regulating materials used in electronic devices and in e-waste recycling. But in the United States many have yet to recognize the persistent human health and environmental effects of the toxics in high tech devices. If Silent Spring brought national attention to the dangers of DDT and other pesticides, High Tech Trash could do the same for a new generation of technology's products.
Download or read book Waste Treatment in the Metal Manufacturing Forming Coating and Finishing Industries written by Lawrence K. Wang and published by CRC Press. This book was released on 2016-04-19 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive in its scope and directly applicable to daily waste management problems of specific industries, Waste Treatment in the Metal Manufacturing, Forming, Coating, and Finishing Industries covers hazardous industrial waste treatment, renovation, and reuse in the metal manufacturing, forming, coating, enameling, and finishing industries. It
Download or read book Biosorption written by Jan Derco and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Municipal and industrial wastewaters contain a wide spectrum of pollutants. Their effective removal presents a challenge for water treatment technology. Biosorption of nutrients and pollutants has been used in sewage treatment since the discovery of the activated sludge process. It is a passive uptake process by which pollutants are adsorbed on the surface of cell walls and/or dissolved in structures of microorganism cells that are present in sludge. Sorbed pollutants remain in the sludge and can be potentially released back into the environment depending on their condition and the reversibility of the pollutant-sludge interaction. An overview of typical biosorption applications for the removal of nutrients, organic pollutants, and metals in wastewater treatment is provided in different areas of their use for the protection of aquatic ecosystems and human health. This book will be of interest to operators of wastewater treatment plants and sludge treatment and disposal facilities as well as to researchers and university students in the field of environmental engineering.
Download or read book E Waste in Transition written by Florin-Constantin Mihai and published by BoD – Books on Demand. This book was released on 2016-06-29 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: E-waste management is a serious challenge across developed, transition, and developing countries because of the consumer society and the globalization process. E-waste is a fast-growing waste stream which needs more attention of international organizations, governments, and local authorities in order to improve the current waste management practices. The book reveals the pollution side of this waste stream with critical implications on the environment and public health, and also it points out the resource side which must be further developed under the circular economy framework with respect to safety regulations. In this context, complicated patterns at the global scale emerge under legal and illegal e-waste trades. The linkages between developed and developing countries and key issues of e-waste management sector are further examined in the book.
Download or read book Industrial Wastewater Treatment Recycling and Reuse written by Vivek V. Ranade and published by Butterworth-Heinemann. This book was released on 2014-07-21 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Wastewater Treatment, Recycling and Reuse is an accessible reference to assist you when handling wastewater treatment and recycling. It features an instructive compilation of methodologies, including advanced physico-chemical methods and biological methods of treatment. It focuses on recent industry practices and preferences, along with newer methodologies for energy generation through waste. The book is based on a workshop run by the Indus MAGIC program of CSIR, India. It covers advanced processes in industrial wastewater treatment, applications, and feasibility analysis, and explores the process intensification approach as well as implications for industrial applications. Techno-economic feasibility evaluation is addressed, along with a comparison of different approaches illustrated by specific case studies. Industrial Wastewater Treatment, Recycling and Reuse introduces you to the subject with specific reference to problems currently being experienced in different industry sectors, including the petroleum industry, the fine chemical industry, and the specialty chemicals manufacturing sector. - Provides practical solutions for the treatment and recycling of industrial wastewater via case studies - Instructive articles from expert authors give a concise overview of different physico-chemical and biological methods of treatment, cost-to-benefit analysis, and process comparison - Supplies you with the relevant information to make quick process decisions
Download or read book Waste Management Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2019-12-06 with total page 1680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the world’s population continues to grow and economic conditions continue to improve, more solid and liquid waste is being generated by society. Improper disposal methods can not only lead to harmful environmental impacts but can also negatively affect human health. To prevent further harm to the world’s ecosystems, there is a dire need for sustainable waste management practices that will safeguard the environment for future generations. Waste Management: Concepts, Methodologies, Tools, and Applications is a vital reference source that examines the management of different types of wastes and provides relevant theoretical frameworks about new waste management technologies for the control of air, water, and soil pollution. Highlighting a range of topics such as contaminant removal, landfill treatment, and recycling, this multi-volume book is ideally designed for environmental engineers, waste authorities, solid waste management companies, landfill operators, legislators, environmentalists, policymakers, government officials, academicians, researchers, and students.
Download or read book Heavy Metals In Water written by Sanjay K. Sharma and published by Royal Society of Chemistry. This book was released on 2014 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest research on dissolved heavy metals in drinking water and their removal.
Download or read book Heavy Metals in Water excluding Mercury written by Water Resources Scientific Information Center and published by . This book was released on 1977 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:
