Download or read book Recrystallization in Materials Processing written by Vadim Glebovsky and published by BoD – Books on Demand. This book was released on 2015-10-28 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Recrystallization in Materials Processing shows selected results obtained during the last few years by researchers worked on recrystallization-related issues. These researchers offer their knowledge from a range of scientific disciplines, such as materials science, metallurgy and pharmacology. The authors emphasize that the progress in this particular field of scientific research is possible today due to coordinated efforts of many research groups that work in materials science, chemistry, physics, pharmacology, and other sciences. Thus, it is possible to perform a detailed analysis of the scientific problem. The analysis starts from the selection of appropriate techniques and methods of characterization. It is then combined with the development of new tools in diagnostics, and it finished with physical modeling of phenomena.
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Recrystallization Types Techniques and Applications written by Ke Huang and published by . This book was released on 2020-03-16 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: A very large part of metallic materials is used in the wrought form. Several thermomechanical processing (TMP) steps are usually employed to produce the intermediate or final products, during which recrystallization and its related phenomena such as work hardening, recovery and grain growth may take place. The sophisticated controlling of recrystallization is one of the most effective ways to tailor the microstructures and mechanical properties of metallic components. Recrystallization: Types, Techniques and Applications is the joint work of several well-known active scientists within this field, and each one focuses on the latest developments of their specific topics. This book covers the deformation structure and recovery, recrystallization and grain growth phenomena, characterization of recrystallization, interaction between recrystallization and solute/second phase particles, the competition between phase transformation and recrystallization, as well as numerical modelling of recrystallization. It is a standard reference for practicing engineers and researchers involved in hot deformation and heat treatment of metallic materials.
Download or read book Recent Developments in the Study of Recrystallization written by Peter Wilson and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization is a phenomenon moderately well documented in the geological and metallurgical literature. This book provides a timely overview of the latest research and methods in a variety of fields where recrystallization is studied and is an important factor. The main advantage of a new look at these fields is the rapid increase in modern techniques, such as TEM, spectrometers and modeling capabilities, all of which are providing us with far better images and analysis than ever previously possible. This book will be invaluable to a wide range of research scientists; metallurgists looking to improve properties of alloys, those interested in how the latest equipment may be used to image grains and to all those who work with frozen aqueous solutions where recrystallization may be a problem.
Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti
Download or read book Recrystallization of Metallic Materials written by Frank Haessner and published by . This book was released on 1978 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Processing Fundamentals 2020 written by Jonghyun Lee and published by Springer. This book was released on 2021-01-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes contributions on the physical and numerical modeling of materials processing, and covers a range of metals and minerals. Authors present models and results related to the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Download or read book Grain Boundary Migration in Metals written by Gunter Gottstein and published by CRC Press. This book was released on 1999-06-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behavior of adjacent materials at the boundary where they meet is an essential aspect of creating new engineering materials. Grain Boundary Migration in Metals is an authoritative account of the physics of grain boundary motion, written by two highly respected researchers. They provide a comprehensive overview of current knowledge regarding the migration process and how it affects microstructure evolution, focusing their treatment exclusively on the properties and behavior of grain boundaries with well defined geometry and crystallography. With their emphasis on applications-such as the characterization of microstructure and texture, recrystallization, and grain growth-the authors effectively fill the gap between the physics of grain boundary motion and its engineering practicality. The need for better microstructural design motivates permanent thrust for research in the field, and continued rapid progress appears inevitable. Grain Boundary Migration in Metals provides a solid foundation in the phenomena and serves as a valuable reference for professionals in materials science, solid state physics, and any industry engaged in metals production and the heat treatment of metals and alloys.
Download or read book Processing Structure Property Relationships in Metals written by Alessandra Varone and published by MDPI. This book was released on 2019-11-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the industrial manufacturing of metals, the achievement of products featuring desired characteristics always requires the control of process parameters in order to obtain a suitable microstructure. The strict relationship among process parameters, microstructure, and mechanical properties is a matter of interest in different areas, such as foundry, plastic forming, sintering, welding, etc., and regards both well-established and innovative processes. Nowadays, circular economy and sustainable technological development are dominant paradigms and impose an optimized use of resources, a lower energetic impact of industrial processes and new tasks for materials and products. In this frame, this Special Issue covers a broad range of research works and contains research and review papers.
Download or read book Recrystallization 90 written by T. Chandra and published by . This book was released on 1990 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Grain Growth IV written by Eric J. Palmiere and published by Trans Tech Publications Ltd. This book was released on 2012-04-12 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Fourth International Conference on Recrystallization and Grain Growth, July 4-9, 2010, Sheffield, UK
Download or read book Recrystallization and Related Annealing Phenomena written by Anthony Rollett and published by Newnes. This book was released on 2017-07-24 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization and Related Annealing Phenomena, Third Edition, fulfills the information needs of materials scientists in both industry and academia. The subjects treated in the book are all active research areas, forming a major part of at least four regular international conference series. This new third edition ensures the reader has access to the latest findings, and is essential reading to those working in the forefront of research in universities and laboratories. For those in industry, the book highlights applications of the research and technology, exploring, in particular, the significant progress made recently in key areas such as deformed state, including deformation to very large strains, the characterization of microstructures by electron backscatter diffraction, the modeling and simulation of annealing, and continuous recrystallization. - Includes over 50% of new, revised, and updated material, highlighting the significant recent literature results in grain growth in non-crystallizing systems, 3D characterization techniques, quantitative modeling techniques, and all-new appendices on texture and measurements - Contains synthesized, detailed coverage from leading authors that bridge the gap between theory and practice - Includes a critical level of synthesis and pedagogy with an authored rather than edited volume
Download or read book Advanced Topics on Crystal Growth written by Sukarno Ferreira and published by BoD – Books on Demand. This book was released on 2013-02-20 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal growth is the key step of a great number of very important applications. The development of new devices and products, from the traditional microelectronic industry to pharmaceutical industry and many others, depends on crystallization processes. The objective of this book is not to cover all areas of crystal growth but just present, as specified in the title, important selected topics, as applied to organic and inorganic systems. All authors have been selected for being key researchers in their field of specialization, working in important universities and research labs around the world. The first section is mainly devoted to biological systems and covers topics like proteins, bone and ice crystallization. The second section brings some applications to inorganic systems and describes more general growth techniques like chemical vapor crystallization and electrodeposition. This book is mostly recommended for students working in the field of crystal growth and for scientists and engineers in the fields of crystalline materials, crystal engineering and the industrial applications of crystallization processes.
Download or read book Magnesium Technology 2020 written by and published by . This book was released on 2020 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2020 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Recrystallization and Grain Growth written by and published by . This book was released on 2004 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization written by Krzysztof Sztwiertnia and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization shows selected results obtained during the last few years by scientists who work on recrystallization-related issues. These scientists offer their knowledge from the perspective of a range of scientific disciplines, such as geology and metallurgy. The authors emphasize that the progress in this particular field of science is possible today thanks to the coordinated action of many research groups that work in materials science, chemistry, physics, geology, and other sciences. Thus, it is possible to perform a comprehensive analysis of the scientific problem. The analysis starts from the selection of appropriate techniques and methods of characterization. It is then combined with the development of new tools in diagnostics, and it ends with modeling of phenomena.
