Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Recrystallization and Related Annealing Phenomena written by Anthony Rollett and published by Newnes. This book was released on 2017-07-24 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization and Related Annealing Phenomena, Third Edition, fulfills the information needs of materials scientists in both industry and academia. The subjects treated in the book are all active research areas, forming a major part of at least four regular international conference series. This new third edition ensures the reader has access to the latest findings, and is essential reading to those working in the forefront of research in universities and laboratories. For those in industry, the book highlights applications of the research and technology, exploring, in particular, the significant progress made recently in key areas such as deformed state, including deformation to very large strains, the characterization of microstructures by electron backscatter diffraction, the modeling and simulation of annealing, and continuous recrystallization. - Includes over 50% of new, revised, and updated material, highlighting the significant recent literature results in grain growth in non-crystallizing systems, 3D characterization techniques, quantitative modeling techniques, and all-new appendices on texture and measurements - Contains synthesized, detailed coverage from leading authors that bridge the gap between theory and practice - Includes a critical level of synthesis and pedagogy with an authored rather than edited volume
Download or read book Recrystallization written by Krzysztof Sztwiertnia and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization shows selected results obtained during the last few years by scientists who work on recrystallization-related issues. These scientists offer their knowledge from the perspective of a range of scientific disciplines, such as geology and metallurgy. The authors emphasize that the progress in this particular field of science is possible today thanks to the coordinated action of many research groups that work in materials science, chemistry, physics, geology, and other sciences. Thus, it is possible to perform a comprehensive analysis of the scientific problem. The analysis starts from the selection of appropriate techniques and methods of characterization. It is then combined with the development of new tools in diagnostics, and it ends with modeling of phenomena.
Download or read book Techniques in Organic Chemistry written by Jerry R. Mohrig and published by Macmillan. This book was released on 2006 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Is the most comprehensive and detailed presentation of lab techniques available for organic chemistry students - and the least expensive. It combines specific instructions for 3 different kinds kinds of laboratory glassware and offers extensive coverage of spectroscopic techniques and a strong emphasis on safety issues.
Download or read book Recrystallization Types Techniques and Applications written by Ke Huang and published by . This book was released on 2020-03-16 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: A very large part of metallic materials is used in the wrought form. Several thermomechanical processing (TMP) steps are usually employed to produce the intermediate or final products, during which recrystallization and its related phenomena such as work hardening, recovery and grain growth may take place. The sophisticated controlling of recrystallization is one of the most effective ways to tailor the microstructures and mechanical properties of metallic components. Recrystallization: Types, Techniques and Applications is the joint work of several well-known active scientists within this field, and each one focuses on the latest developments of their specific topics. This book covers the deformation structure and recovery, recrystallization and grain growth phenomena, characterization of recrystallization, interaction between recrystallization and solute/second phase particles, the competition between phase transformation and recrystallization, as well as numerical modelling of recrystallization. It is a standard reference for practicing engineers and researchers involved in hot deformation and heat treatment of metallic materials.
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-04-25 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference provides thorough and in-depth coverage of the latest production and processing technologies encountered in the aluminum alloy industry, discussing current analytical methods for aluminum alloy characterization as well as extractive metallurgy, smelting, master alloy formation, and recycling. The Handbook of Aluminum: Volume 2 examin
Download or read book Dolomitization and Limestone Diagenesis written by Raymond C. Murray and published by . This book was released on 1965 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Texture Analysis written by Olaf Engler and published by CRC Press. This book was released on 2009-11-16 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping broke new ground by collating seventy years worth of research in a convenient single-source format. Reflecting emerging methods and the evolution of the field, the second edition continues to provide comprehensive coverage of the concepts, pra
Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.
Download or read book Continuum Scale Simulation of Engineering Materials written by Dierk Raabe and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap by presenting our current knowledge and understanding of continuum-based concepts behind computational methods used for microstructure and process simulation of engineering materials above the atomic scale. The volume provides an excellent overview on the different methods, comparing the different methods in terms of their respective particular weaknesses and advantages. This trains readers to identify appropriate approaches to the new challenges that emerge every day in this exciting domain. Divided into three main parts, the first is a basic overview covering fundamental key methods in the field of continuum scale materials simulation. The second one then goes on to look at applications of these methods to the prediction of microstructures, dealing with explicit simulation examples, while the third part discusses example applications in the field of process simulation. By presenting a spectrum of different computational approaches to materials, the book aims to initiate the development of corresponding virtual laboratories in the industry in which these methods are exploited. As such, it addresses graduates and undergraduates, lecturers, materials scientists and engineers, physicists, biologists, chemists, mathematicians, and mechanical engineers.
Download or read book Handbook of Workability and Process Design written by George E. Dieter and published by ASM International. This book was released on 2003-01-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Materials Science and Engineering written by William D. Callister, Jr. and published by John Wiley & Sons. This book was released on 2020-07-28 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an unbound, three hole punched version. Fundamentals of Materials Science and Engineering: An Integrated Approach, Binder Ready Version, 5th Edition takes an integrated approach to the sequence of topics – one specific structure, characteristic, or property type is covered in turn for all three basic material types: metals, ceramics, and polymeric materials. This presentation permits the early introduction of non-metals and supports the engineer's role in choosing materials based upon their characteristics. Using clear, concise terminology that is familiar to students, Fundamentals presents material at an appropriate level for both student comprehension and instructors who may not have a materials background. This text is an unbound, three hole punched version. Access to WileyPLUS sold separately.
Download or read book Ultra Fine Grained Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2009-04-08 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. It thoroughly describes theoretical achievements in ultra-fine grain steel and its refinement. It also discusses progress in related areas of engineering and technology. The author has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three national research programs in China.
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book Micromechanisms in Particle Hardened Alloys written by J. W. Martin and published by Cambridge University Press. This book was released on 1980-07-10 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was first published in 1980. A great number of metallic materials in practical use owe their strength to the presence in their microstructure of particles of a hard precipitated phase. The text emphasises the importance of scientific rather than empirical methods in attempting to develop particle-hardened alloys. The author progresses from an elementary knowledge of metallurgy to theories relating to the deformation and fracture of alloys of this type. He also discusses the use of such theories to describe observations on both model materials and practical metals. After a discussion of the microstructures of these alloys, how they form and how to describe them quantitatively, their deformation and fracture behaviour at both low and elevated temperatures are examined.
Download or read book Materials Science and Engineering written by G. F. Carter and published by ASM International. This book was released on 1991-01-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:
