Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways EAU 2012 written by HTG and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "EAU 2012" takes into account the new generation of standards, which is shortly to be introduced into the building control system; it consists of Eurocode 7, the associated national application documents and additional national regulations (DIN 1054:2010). In certain cases, partial safety factors are determined differently based on experience in practice. This means that the safety standard of sea and port buildings remains in place; the recommendations nevertheless satisfy the requirements for international recognition and application regarding the planning, design, specification, tender procedure, construction and monitoring, as well as the handover of - and cost accounting for - port and waterway systems under uniform criteria.
Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways EAU 2004 written by Arbeitsausschuss and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1949 the "Committee for Waterfront Structures" has operated on honorary base as a committee of the Society for Harbour Engineering (HTG), Hamburg, and since 1951 also as working group of the German Society for Geotechnics (DGGT), Essen. Its full designation reads "Committee for Simplification an Standardization of Calculation and Construction of Waterfront Structures", which also outlines its goals. Following on from the previous joint publications, this new edition of EAU 2004 contains the safety concept with partial safety factors in accordance with the Eurocodes or the European prestandards as well as with the new edition of the corresponding German standard, partially differing on account of practice experiences. The recommendations continue to satisfy the requirements for international acknowledgement and application with regard to planning, design tendering, the awarding of contracts, building and building supervision. Further, the inspection and accounting procedures for harbour and waterway constructions are given from uniform points of view.
Download or read book Recommendations of the Committee for Waterfront Structures Harbours and Waterways written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Port Designer s Handbook written by Carl A. Thoresen and published by Thomas Telford. This book was released on 2003 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past twenty years there has been considerable improvement and new information in the design of port and berth structures. This handbook reflects the lastest progress and developments in navigation safety, port planning and site selection, layout of container, oil and gas terminals, cargo handling, berth design and construction, fender and mooring principles. It presents guidelines and recommendations for the main items and assumptions in the layout, desing and construction of modern port structures, and the forces and loadings acting on them. The book provides an evaluation of different designs and construction methods for port and berth structures, and recommendations given by the different international harbour standards and recommendations. Practising harbour and port engineers and students will find the handbook an invaluable source of information.
Download or read book Hydraulic Fill Manual written by Jan van 't Hoff and published by CRC Press. This book was released on 2012-12-18 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without proper hydraulic fill and suitable specialised equipment, many major infrastructure projects such as ports, airports, roads, industrial or housing projects could not be realised. Yet comprehensive information about hydraulic fill is difficult to find. This thoroughly researched book, written by noted experts, takes the reader step-by-step through the complex development of a hydraulic fill project. Up-to-date and in-depth, this manual will enable the client and his consultant to understand and properly plan a reclamation project. It provides adequate guidelines for design and quality control and allows the contractor to work within known and generally accepted guidelines and reasonable specifications. The ultimate goal is to create better-designed, more adequately specified and less costly hydraulic fill projects. The Hydraulic Fill Manual covers a range of topics such as: • The development cycle of a hydraulic fill project • How technical data are acquired and applied • The construction methods applicable to a wide variety of equipment and soil conditions, the capabilities of dredging equipment and the techniques of soil improvement • How to assess the potentials of a borrow pit • Essential environment assessment issues • The design of the hydraulic fill mass, including the boundary conditions for the design, effects of the design on its surroundings, the strength and stiffness of the fill mass, density, sensitivity to liquefaction, design considerations for special fill material such as silts, clays and carbonate sands, problematic subsoils and natural hazards • Quality control and monitoring of the fill mass and its behaviour after construction. This manual is of particular interest to clients, consultants, planning and consenting authorities, environmental advisors, contractors and civil, geotechnical, hydraulic and coastal engineers involved in dredging and land reclamation projects.
Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-09 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.
Download or read book Design of Marine Facilities written by John Gaythwaite and published by American Society of Civil Engineers. This book was released on 2016 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quay Walls Second Edition written by J.G. de Gijt and published by CRC Press. This book was released on 2013-12-02 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the handbook of Quay Walls provides the reader with essential knowledge for the planning, design, execution and maintenance of quay walls, as well as general information about historical developments and lessons learned from the observation of ports in various countries. Technical chapters are followed by a detailed calculation of a quay wall based on a semi-probabilistic design procedure, which applies the theory presented earlier. Since the publication of the Dutch edition in 2003 and the English version in 2005, considerable new experience has been obtained by the many practitioners using the book, prompting the update of this handbook. Moreover, the introduction of the Eurocodes in 2012 has prompted a complete revision of the Design chapter, which is now compliant with the Eurocodes. Furthermore, additional recommendations for using FEM-analysis in quay wall design have been included. In response to ongoing discussions within the industry about buckling criteria for steel pipe piles, a thorough research project was carried out on steel pipe piles fi lled with sand and on piles without sand. The results of this research programme have also been incorporated in this new version. Finally, the section on corrosion has been updated to refl ect the latest knowledge and attention has been given to the latest global developments in quay wall engineering. The new edition was made possible thanks to the contributions of numerous experts from the Netherlands and Belgium.
Download or read book Flexible Dolphins written by Crow and published by CRC Press. This book was released on 2021-09-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Millions of breasting and mooring dolphins have been installed in inland waterways adjacent to jetties and waiting facilities for ship-to-ship transhipment or as crash barriers in commercial port areas throughout the world. A dolphin is a marine structure that is frequently installed in ports, waterways and other places related to marine traffic. Dolphins are typically located adjacent to waterfront structures such as quay walls, jetties, locks and bridge piers. The purpose of a dolphin is threefold: Allow ships to berth and moor safely and efficiently Protect waterfront structures by acting as a crash barrier and sacrificial structure Direct and guide marine traffic by acting as a lead-in dolphin and navigation aid The main objective of this handbook is to provide engineers, asset managers, suppliers, tender teams, contractors and principals with such guidance on the design and construction of flexible dolphins by collecting and describing knowledge of and experience with these flexible marine structures.This handbook is intended to prevent extensive discussions during the design and construction stages of projects involving flexible dolphins. It is part of a series of Dutch port infrastructure design recommendations that include the Quay Walls handbook and Jetties and Wharfs handbook.
Download or read book Handbook of Terminal Planning written by Jürgen W. Böse and published by Springer Nature. This book was released on 2020-09-14 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seaport Container Terminals (SCT) operate as central nodes in worldwide hub-and-spoke networks, and link ocean-going vessels with smaller feeder vessels, as well as with inbound and outbound hinterland transportation systems using road, rail, or inland waterways. The volume of transcontinental container flows has gained enormously over the last five decades frequently leading to double-digit annual growth rates for the SCT. The 2nd edition of the Handbook of Terminal Planning also deals with problems being induced by questions of terminal development on a long-term basis (strategic level). Facing present and upcoming challenges for SCT operation—such as more and more mega vessels, extremely high hinterland peaks, higher environmental standards, less public acceptance and the stronger competition between terminals serving the same hinterland—the focus of the book is on successful approaches and solutions primarily addressing the planning of terminal structures. Nevertheless, operational aspects are considered, as well as how they effectively contribute to problem solving on the strategic level.
Download or read book Jetties and Wharfs written by CROW and published by CRC Press. This book was released on 2021-09-29 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: For centuries, jetties and wharfs have been designed and built around the world and play an important role in contemporary ports. The difference in the use of jetties, piers and wharfs is that jetties are frequently used for the transhipment and storage of light materials and ro-ro traffic, while piers are generally used for heavy loads like iron ore. That is why piers are mostly designed and constructed like quay walls (which are beyond the scope of this handbook). The designs were originally based on trial and error and the insights of those who dared to conquer local conditions, such as wind, waves, currents and soil composition. Design and construction techniques have since evolved into the designs we see on the coast or in river ports and seaports nowadays. The purpose of this handbook is to provide insight and guidelines regarding aspects that are important in the design of jetties and wharfs. Jetty-specific issues such as loads, interfaces between materials, installations on jetties and wharfs, as well as detailing aspects, are also covered. This handbook is part of a series of Dutch port infrastructure design recommendations that include the Quay Walls handbook and Flexible Dolphins handbook.
Download or read book Advances in Computer Methods and Geomechanics written by Amit Prashant and published by Springer Nature. This book was released on 2020-01-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers from IACMAG Symposium,The major themes covered in this conference are Earthquake Engineering, Ground Improvement and Constitutive Modelling. This volume will be of interest to researchers and practitioners in geotechnical and geomechanical engineering.
Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.
Download or read book Earth Pressure written by Achim Hettler and published by John Wiley & Sons. This book was released on 2020-01-13 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of earth pressure is one of the oldest and most extensive chapters in soil mechanics and foundation engineering and is one of the pillars of structural engineering. First the development of earth pressure theory is comprehensively described. The descriptions range from the first approaches to the determination of earth pressure through continuum mechanical earth pressure models to the integration of earth pressure research into the disciplinary structure of geotechnics. The main part of the book comprises a selection of current calculation basics. The aim is to provide a collection of working instructions for foundation and structural engineers in construction companies, consultants and in building supervision as well as students. In order to further theoretical understanding, the essential basics of the determination of earth pressure are first presented. Then the most important processes for active and passive earth pressure and at-rest earth pressure for practical application are dealt with, with spatial effects also being taken into account. The book sets out to provide brief information about rarely encountered questions with references to further literature. In recent years, the dependency of earth pressure on displacement has been paid ever more attention. This applies not just to the passive but also to the active case. Questions are repeatedly passed to the DIN committee "calculation processes". A selection of these is dealt with in the commentary to DIN 4085, which came out in September 2018. The history of earth pressure theory is supplemented by 40 selected short biographies of scientists and practical engineers, who have taken up the subject and further developed it over the years. The book also has two appendices with terms, formula symbols and indices as well as earth pressure tables.
Download or read book The Power of Urban Water written by Nicola Chiarenza and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-05-05 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water is a global resource for modern societies - and water was a global resource for pre-modern societies. The many different water systems serving processes of urbanisation and urban life in ancient times and the Middle Ages have hardly been researched until now. The numerous contributions to this volume pose questions such as what the basic cultural significance of water was, the power of water, in the town and for the town, from different points of view. Symbolic, aesthetic, and cult aspects are taken up, as is the role of water in politics, society, and economy, in daily life, but also in processes of urban planning or in urban neighbourhoods. Not least, the dangers of polluted water or of flooding presented a challenge to urban society. The contributions in this volume draw attention to the complex, manifold relations between water and human beings. This collection presents the results of an international conference in Kiel in 2018. It is directed towards both scholars in ancient and mediaeval studies and all those interested in the diversity of water systems in urban space in ancient and mediaeval times.
Download or read book Models for Financing Cost and Risk Assessment of Major Railway Tunnel Projects in Europe written by Ernst & Sohn and published by VCH. This book was released on 2020-03-09 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for the Design of Fender Systems written by Maritime Navigation Commission. Working Group 33 and published by PIANC. This book was released on 2002 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
