Download or read book RF Superconductivity written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2009-04-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book to RF Superconducting, written by one of the leading experts. The book provides fast and up-to-date access to the latest advances in the key technology for future accelerators. Experts as well as newcomers to the field will benefit from the discussion of progress in the basic science, technology as well as recent and forthcoming applications. Researchers in accelerator physics will also find much that is relevant to their discipline.

Download or read book Advances in Cryogenic Engineering written by Peter Kittel and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 2054 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oregon Convention Center, Portland, Oregon, was the venue for the 1997 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. John Barclay, of the University of Victoria, and David Smathers, of Cabot Performance Materials, were conference chairmen. Portland is the home of Northwest Natural Gas, a pioneer in the use of liquid natural gas, and Portland State University, where cryogenic research has long been conducted. The program consisted of 350 CEC papers, considerable more than CEC-95. This was the largest number of papers ever submitted to the CEC. Of these, 263 papers are published here, in Volume 43 of Advances in Cryogenic Engineering. Once again the volume is published in two books. CEC PAPER REVIEW PROCESS Since 1954 Advances in Cryogenic Engineering has been the archival publication of papers presented at the biennial CEC!ICMC conferences. The publication includes invited, unsolicited, and government sponsored research papers in the research areas of cryogenic engineering and applications. All of the papers published must (1) be presented at the conference, (2) pass the peer review process, and (3) report previously unpublished theoretical studies, reviews, or advances in cryogenic engineering.

Download or read book Reviews of Accelerator Science and Technology written by Alexander W. Chao and published by World Scientific. This book was released on 2013-01-28 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to superconducting technology and its applications, including superconducting magnets (SC magnets) and superconducting radio-frequency (SRF) cavities.

Download or read book Reviews Of Accelerator Science And Technology Volume 5 Applications Of Superconducting Technology To Accelerators written by Alexander Wu Chao and published by World Scientific. This book was released on 2013-01-28 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several decades major advances in accelerators have resulted from breakthroughs in accelerator science and accelerator technology. After the introduction of a new accelerator physics concept or the implementation of a new technology, a leap in accelerator performance followed. A well-known representation of these advances is the Livingston chart, which shows an exponential growth of accelerator performance over the last seven or eight decades. One of the breakthrough accelerator technologies that support this exponential growth is superconducting technology. Recognizing this major technological advance, we dedicate Volume 5 of Reviews of Accelerator Science and Technology (RAST) to superconducting technology and its applications.Two major applications are superconducting magnets (SC magnets) and superconducting radio-frequency (SRF) cavities. SC magnets provide much higher magnetic field than their room-temperature counterparts, thus allowing accelerators to reach higher energies with comparable size as well as much reduced power consumption. SRF technology allows field energy storage for continuous wave applications and energy recovery, in addition to the advantage of tremendous power savings and better particle beam quality. In this volume, we describe both technologies and their applications. We also include discussion of the associated R&D in superconducting materials and the future prospects for these technologies.

Download or read book Handbook Of Accelerator Physics And Engineering Third Edition written by Alexander Wu Chao and published by World Scientific. This book was released on 2023-02-02 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing many new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to common formulae of previous compilations, hard to find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world's most able practioners of the art and science of accelerators.The seven chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities due to the various interactions mentioned. A chapter on operational considerations including discussions on the assessment and correction of orbit and optics errors, realtime feedbacks, generation of short photon pulses, bunch compression, phase-space exchange, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cryogenic vacuum systems, steady state microbuching, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes, machine learning, multiple frequency rf systems, FEL seeding, ultrafast electron diffraction, and Gamma Factory. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement, including undulators, and acceleration (both normal and superconducting) receive detailed treatment in a sub-systems chapter, beam measurement and apparatus being treated therein as well.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.

Download or read book Proceedings of the Workshop on Applications of High Intensity Proton Accelerators written by Rajendran Raja and published by World Scientific. This book was released on 2010 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume captures the contents of the talks given at the Workshop on Applications of High Intensity Proton Accelerators held at Fermilab Oct 19ndash;21, 2009. This workshop brought together experts from a variety of disciplines to explore new and profound ways proton accelerators can be used in the future. The workshop explored uses of such a proton source for producing intense muon, kaon and neutrino beams as well as using the intense protons for new forms of nuclear reactors that go by the name Accelerator Driven Sub-critical systems that promise to increase our available nuclear fuel supply by orders of magnitude while at the same time solving the nuclear waste problem. Intense proton beams can also be used to produce short-lived nuclear isotopes that are important in the medical industry.

Download or read book Reviews Of Accelerator Science And Technology Volume 4 Accelerator Applications In Industry And The Environment written by Alexander Wu Chao and published by World Scientific. This book was released on 2012-02-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their debut in the late 1920s, particle accelerators have evolved into a backbone for the development of science and technology in modern society. Of about 30,000 accelerators at work in the world today, a majority is for applications in industry (about 20,000 systems worldwide).There are two major categories of industrial applications: materials processing and treatment, and materials analysis. Materials processing and treatment includes ion implantation (semi-conductor materials, metals, ceramics, etc.) and electron beam irradiation (sterilization of medical devices, food pasteurization, treatment of carcasses and tires, cross-linking of polymers, cutting and welding, curing of composites, etc.). Materials analysis covers ion beam analysis (IBA), non-destructive detection using photons and neutrons, as well as accelerator mass spectrometry (AMS). All the products that are processed, treated and inspected using beams from particle accelerators are estimated to have a collective value of US$500 billion per annum worldwide. Accelerators are also applied for environment protection, such as purifying drinking water, treating waste water, disinfecting sewage sludge and removing pollutants from flue gases.Industrial accelerators continue to evolve, in terms of new applications, qualities and capabilities, and reduction of their costs. Breakthroughs are encountered whenever a new product is made, or an existing product becomes more cost effective. Their impact on our society continues to grow with the potential to address key issues in economics or the society of today.This volume contains fourteen articles, all authored by renowned scientists in their respective fields.

Download or read book Reviews of Accelerator Science and Technology written by Alex Chao and published by World Scientific. This book was released on 2012-02-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends for electron beam accelerator applications in industry / Sueo Machi -- Ion implantation for semiconductor doping and materials modification / Lawrence A. Larson, Justin M. Williams and Michael I. Current -- Ion beam analysis: a century of exploiting the electronic and nuclear structure of the atom for materials characterisation / Chris Jeynes, Roger P. Webb and Annika Lohstroh -- Neutrons and photons in nondestructive detection / J.F. Harmon, D.P. Wells and A.W. Hunt -- Review of cyclotrons for the production of radioactive isotopes for medical and industrial applications / Paul Schmor -- Development of accelerator mass spectrometry and its applications / Jiaer Chen [und weitere] -- Electron accelerators for environmental protection / Andrzej G. Chmielewski -- Studying radiation damage in structural materials by using ion accelerators / Peter Hosemann -- Direct current accelerators for industrial applications / Ragnar Hellborg and Harry J. Whitlow -- Radio-frequency electron accelerators for industrial applications / Marshall R. Cleland -- Accelerators for neutron generation and their applications / Guenter Mank, Guenter Bauer and Francoise Mulhauser -- Prospects for accelerator technology / Alan Todd -- CERN: from birth to success / Herwig Schopper -- Simon van der Meer (1925-2011): a modest genius of accelerator science / Vinod C. Chohan

Download or read book Reviews Of Accelerator Science And Technology Volume 10 The Future Of Accelerators written by Weiren Chou and published by World Scientific. This book was released on 2019-09-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 10 in the series of the annual journal Reviews of Accelerator Science and Technology (RAST), will be its final volume. Its theme is 'The Future of Accelerators'. This volume, together with previous 9 volumes, gives readers a complete picture as well as detailed technical information about the accelerator field, and its many driving and fascinating aspects.This volume has 17 articles. The first 15 articles have a different approach from the previous volumes. They emphasize the more personal views, perspectives and advice from the frontier researchers rather than provide a review or survey of a specific subfield. This emphasis is more aligned with the theme of the current volume. The other two articles are dedicated respectively to Leon Lederman and Burton Richter, two prominent leaders of our community who left us last year.

Download or read book Applied Superconductivity written by Paul Seidel and published by John Wiley & Sons. This book was released on 2015-01-29 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the details of many applications, is an essential reference for physicists and engineers in academic research as well as in industry. Readers looking for a comprehensive overview on basic effects related to superconductivity and superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors with respect to their application. Technology, preparation and characterization are covered for bulk, single crystals, thins fi lms as well as electronic devices, wires and tapes. The main benefit of this work lies in its broad coverage of significant applications in magnets, power engineering, electronics, sensors and quantum metrology. The reader will find information on superconducting magnets for diverse applications like particle physics, fusion research, medicine, and biomagnetism as well as materials processing. SQUIDs and their usage in medicine or geophysics are thoroughly covered, as are superconducting radiation and particle detectors, aspects on superconductor digital electronics, leading readers to quantum computing and new devices.

Download or read book Free Electron Lasers 2002 written by K.-J. Kim and published by Newnes. This book was released on 2012-12-02 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 24th International Free Electron Laser Conference and the 9th Free Electron Laser Users Workshop, which were held on September 9-13, 2002 at Argonne National Laboratory. Part I has been reprinted from Nucl. Instr. and Meth. A 507 (2003), Nos. 1-2.

Download or read book The Physics and Applications of High Brightness Electron Beams written by Luigi Palumbo and published by World Scientific. This book was released on 2007 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings comprise cutting-edge contributions by researchers at the frontiers of beam physics, free-electron-based light sources, and advanced accelerators. It represents a snap-shot of activity in these fields at a critical historical juncture, where rapid experimental progress is being reported, and new facilities such as X-ray free-electron lasers are under construction. The volume features invited contributions from leading researchers from the international beam physics community that summarize the state-of-the-art research in individual topics, as well as timely contributions from participants that arose during the workshop itself.

Download or read book The Physics and Applications of High Brightness Electron Beams written by INFN ELOISATRON Project. Workshop and published by World Scientific. This book was released on 2007 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings comprise cutting-edge contributions by researchers at the frontiers of beam physics, free-electron-based light sources, and advanced accelerators. It represents a snap-shot of activity in these fields at a critical historical juncture, where rapid experimental progress is being reported, and new facilities such as X-ray free-electron lasers are under construction. The volume features invited contributions from leading researchers from the international beam physics community that summarize the state-of-the-art research in individual topics, as well as timely contributions from participants that arose during the workshop itself.

Download or read book CERN Courier written by and published by . This book was released on 2012 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cryostat Design written by J.G. Weisend II and published by Springer. This book was released on 2016-08-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are leading experts in the field, most of whom participated in the design of the cryostats being described. The concluding chapter offers an overview of lessons learned and summarises some key hints and tips for practical cryostat design. The book will help the reader to expand their knowledge of many disciplines required for good cryostat design, including the cryogenic properties of materials, heat transfer and thermal insulation, instrumentation, safety, structures and seals.

Download or read book Global developments towards continuous wave free electron lasers written by Ye Chen and published by Frontiers Media SA. This book was released on 2023-11-09 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Superconducting Radiofrequency Technology for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2023-05-15 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting Radiofrequency Technology for Accelerators Single source reference enabling readers to understand and master state-of-the-art accelerator technology Superconducting Radiofrequency Technology for Accelerators provides a quick yet thorough overview of the key technologies for current and future accelerators, including those projected to enable breakthrough developments in materials science, nuclear and astrophysics, high energy physics, neutrino research and quantum computing. The work is divided into three sections. The first part provides a review of RF superconductivity basics, the second covers new techniques such as nitrogen doping, nitrogen infusion, oxide-free niobium, new surface treatments, and magnetic flux expulsion, high field Q slope, complemented by discussions of the physics of the improvements stemming from diagnostic techniques and surface analysis as well as from theory. The third part reviews the on-going applications of RF superconductivity in already operational facilities and those under construction such as light sources, proton accelerators, neutron and neutrino sources, ion accelerators, and crab cavity facilities. The third part discusses planned accelerator projects such as the International Linear Collider, the Future Circular Collider, the Chinese Electron Positron Collider, and the Proton Improvement Plan-III facility at Fermilab as well as exciting new developments in quantum computing using superconducting niobium cavities. Written by the leading expert in the field of radiofrequency superconductivity, Superconducting Radiofrequency Technology for Accelerators covers other sample topics such as: Fabrication and processing on Nb-based SRF structures, covering cavity fabrication, preparation, and a decade of progress in the field SRF physics, covering zero DC resistance, the Meissner effect, surface resistance and surface impedance in RF fields, and non-local response of supercurrent N-doping and residual resistance, covering trapped DC flux losses, hydride losses, and tunneling measurements Theories for anti-Q-slope, covering the Xiao theory, the Gurevich theory, non-equilibrium superconductivity, and two fluid model based on weak defects Superconducting Radiofrequency Technology for Accelerators is an essential reference for high energy physicists, power engineers, and electrical engineers who want to understand the latest developments of accelerator technology and be able to harness it to further research interest and practical applications.