Download or read book State of the Art and Practice in the Assessment of Earthquake Induced Soil Liquefaction and Its Consequences written by National Academies of Sciences, Engineering, and Medicine and published by . This book was released on 2019-01-30 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-induced soil liquefaction (liquefaction) is a leading cause of earthquake damage worldwide. Liquefaction is often described in the literature as the phenomena of seismic generation of excess porewater pressures and consequent softening of granular soils. Many regions in the United States have been witness to liquefaction and its consequences, not just those in the west that people associate with earthquake hazards. Past damage and destruction caused by liquefaction underline the importance of accurate assessments of where liquefaction is likely and of what the consequences of liquefaction may be. Such assessments are needed to protect life and safety and to mitigate economic, environmental, and societal impacts of liquefaction in a cost-effective manner. Assessment methods exist, but methods to assess the potential for liquefaction triggering are more mature than are those to predict liquefaction consequences, and the earthquake engineering community wrestles with the differences among the various assessment methods for both liquefaction triggering and consequences. State of the Art and Practice in the Assessment of Earthquake-Induced Soil Liquefaction and Its Consequences evaluates these various methods, focusing on those developed within the past 20 years, and recommends strategies to minimize uncertainties in the short term and to develop improved methods to assess liquefaction and its consequences in the long term. This report represents a first attempt within the geotechnical earthquake engineering community to consider, in such a manner, the various methods to assess liquefaction consequences.
Download or read book Recent Challenges and Advances in Geotechnical Earthquake Engineering written by Sitharam, T.G. and published by IGI Global. This book was released on 2018-08-24 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid design and craftsmanship are a necessity for structures and infrastructures that must stand up to natural disasters on a regular basis. Continuous research developments in the engineering field are imperative for sustaining buildings against the threat of earthquakes and other natural disasters. Recent Challenges and Advances in Geotechnical Earthquake Engineering provides innovative insights into the methods of structural engineering techniques, as well as disaster management strategies. The content within this publication represents the work of rock fracturing, hazard analysis, and seismic acceleration. It is a vital reference source for civil engineers, researchers, and academicians, and covers topics centered on improving a structure’s safety, stability, and resistance to seismic hazards.
Download or read book Handbook of Research on Trends and Digital Advances in Engineering Geology written by Ceryan, Nurcihan and published by IGI Global. This book was released on 2017-07-12 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering geologists face the task of addressing geological factors that can affect planning with little time and with few resources. A solution is using the right tools to save time searching for answers and devote attention to making critical engineering decisions. The Handbook of Research on Trends and Digital Advances in Engineering Geology is an essential reference source for the latest research on new trends, technology, and computational methods that can model engineering phenomena automatically. Featuring exhaustive coverage on a broad range of topics and perspectives such as acoustic energy, landslide mapping, and natural hazards, this publication is ideally designed for academic scientists, industry and applied researchers, and policy and decision makers seeking current research on new tools to aid in timely decision-making of critical engineering situations.
Download or read book Advanced Soil Dynamics and Earthquake Engineering written by Bharat Bhushan Prasad and published by PHI Learning Pvt. Ltd.. This book was released on 2011 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book In Situ Testing in Geomechanics written by Fernando Schnaid and published by CRC Press. This book was released on 2008-12-15 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the practice and theory of the five key tests used in site characterisation by Geomechanical and Environmental Engineers. These tests are: Standard Penetration Tests, Cone Penetration Tests, Vane Test, Pressuremeter Tests, Dilatometer Tests. This book is aimed at practising engineers although its practical angle will also appeal to Civil Engineering students in their 3rd and 4th years.
Download or read book Earthquake Engineering Handbook written by Charles Scawthorn and published by CRC Press. This book was released on 2002-09-27 with total page 1508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes are nearly unique among natural phenomena - they affect virtually everything within a region, from massive buildings and bridges, down to the furnishings within a home. Successful earthquake engineering therefore requires a broad background in subjects, ranging from the geologic causes and effects of earthquakes to understanding the imp
Download or read book Soil Liquefaction During Earthquakes written by I. M. Idriss and published by . This book was released on 2008 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book North Baja Pipeline Project written by and published by . This book was released on 2002 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Engineering written by Yousef Bozorgnia and published by CRC Press. This book was released on 2004-05-11 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-contributor book provides comprehensive coverage of earthquake engineering problems, an overview of traditional methods, and the scientific background on recent developments. It discusses computer methods on structural analysis and provides access to the recent design methodologies and serves as a reference for both professionals and res
Download or read book The Evolution of Geotech 25 Years of Innovation written by Reginald Hammah and published by CRC Press. This book was released on 2021-11-23 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication includes 82 technical papers presented at Rocscience International Conference (RIC) 2021, held online on April 20 and 21, 2021. Rocscience created this event to bring geotechnical academics, researchers and practitioners together to exchange ideas as part of celebrating 25 years of the company’s existence. The papers in these proceedings were from keynotes, panel discussions and papers, selected after careful review of over 100 technical submissions delivered at RIC 2021. The technical papers were grouped into sessions based on their subject areas. The conference aimed to stimulate discussions that could help the industry work towards overcoming geotechnical engineering limitations today. It also sought to foster creative thinking that will advance the current states of the art and practice. The keynote addresses, panel discussions and technical presentations tried to examine geotechnical problems and situations from fresh perspectives. RIC 2021 hopes that the proceedings will continue to enrich our thinking and contribute to achieving a critical mass of change in our practices and approaches. We look forward to significant improvements in our industry.
Download or read book Geotechnical Earthquake Engineering written by Steven L. Kramer and published by CRC Press. This book was released on 2024-11-29 with total page 1061 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated second edition provides an introduction to geotechnical earthquake engineering for first-year graduate students in geotechnical or earthquake engineering graduate programs with a level of detail that will also be useful for more advanced students as well as researchers and practitioners. It begins with an introduction to seismology and earthquake ground motions, then presents seismic hazard analysis and performance-based earthquake engineering (PBEE) principles. Dynamic soil properties pertinent to earthquake engineering applications are examined, both to facilitate understanding of soil response to seismic loads and to describe their practical measurement as part of site characterization. These topics are followed by site response and its analysis and soil–structure interaction. Ground failure in the form of soil liquefaction, cyclic softening, surface fault rupture, and seismically induced landslides are also addressed, and the book closes with a chapter on soil improvement and hazard mitigation. The first edition has been widely used around the world by geotechnical engineers as well as many seismologists and structural engineers. The main text of this book and the four appendices: • Cover fundamental concepts in applied seismology, geotechnical engineering, and structural dynamics. • Contain numerous references for further reading, allowing for detailed exploration of background or more advanced material. • Present worked example problems that illustrate the application of key concepts emphasized in the text. • Include chapter summaries that emphasize the most important points. • Present concepts of performance-based earthquake engineering with an emphasis on uncertainty and the types of probabilistic analyses needed to implement PBEE in practice. • Present a broad, interdisciplinary narrative, drawing from the fields of seismology, geotechnical engineering, and structural engineering to facilitate holistic understanding of how geotechnical earthquake engineering is applied in seismic hazard and risk analyses and in seismic design.
Download or read book Advances in Indian Earthquake Engineering and Seismology written by M. L. Sharma and published by Springer. This book was released on 2018-06-22 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is an up-to-date guide for students, policy makers and engineers on earthquake engineering, including methods and technologies for seismic hazard detection and mitigation. The book was written in honour of the late Professor Jai Krishna, who was a pioneer in teaching and research in the field of earthquake engineering in India during his decades-long work at the University of Roorkee (now the Indian Institute of Technology Roorkee). The book comprehensively covers the historical development of earthquake engineering in India, and uses this background knowledge to address the need for current advances in earthquake engineering, especially in developing countries. After discussing the history and growth of earthquake engineering in India from the past 50 years, the book addresses the present status of earthquake engineering in regards to the seismic resistant designs of bridges, buildings, railways, and other infrastructures. Specific topics include response spectrum superposition methods, design philosophy, system identification approaches, retaining walls, and shallow foundations. Readers will learn about developments in earthquake engineering over the past 50 years, and how new methods and technologies can be applied towards seismic risk and hazard identification and mitigation.
Download or read book Seismic Performance of Soil Foundation Structure Systems written by Nawawi Chouw and published by CRC Press. This book was released on 2017-08-25 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Performance of Soil-Foundation-Structure Systems presents invited papers presented at the international workshop (University of Auckland, New Zealand, 21-22 November 2016). This international workshop brought together outstanding work in earthquake engineering that embraces a holistic consideration of soilfoundation-structure systems. For example, the diversity of papers in this volume is represented by contributions from the fields of shallow foundation in liquefiable soil, spatially distributed lifelines, bridges, clustered structures (see photo on front cover), sea floor seismic motion, multi-axial ground excitation, deep foundations, soil-foundation-structurefluid interaction, liquefaction-induced settlement and uplift with SFSI. A fundamental knowledge gap is manifested by the isolated manner geotechnical and structural engineers work. A holistic consideration of soil-foundation-structures systems is only possible if civil engineers work collaboratively to the mutual benefit of all disciplines. Another gap occurs by the retarded application of up-to-date research findings in engineering design practices. Seismic Performance of Soil-Foundation-Structure Systems is the outcome from the recognized need to close this gap, since it has been observed that a considerable delay exists between published research findings and application of the principles revealed by the research. Seismic Performance of Soil-Foundation-Structure Systems will be helpful in developing more understanding of the complex nature of responses these systems present under strong earthquakes, and will assist engineers in closing the gaps identified above.
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 7743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Download or read book Handbook of Research on Swarm Intelligence in Engineering written by Bhattacharyya, Siddhartha and published by IGI Global. This book was released on 2015-04-30 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Swarm Intelligence has recently emerged as a next-generation methodology belonging to the class of evolutionary computing. As a result, scientists have been able to explain and understand real-life processes and practices that previously remained unexplored. The Handbook of Research on Swarm Intelligence in Engineering presents the latest research being conducted on diverse topics in intelligence technologies such as Swarm Intelligence, Machine Intelligence, Optical Engineering, and Signal Processing with the goal of advancing knowledge and applications in this rapidly evolving field. The enriched interdisciplinary contents of this book will be a subject of interest to the widest forum of faculties, existing research communities, and new research aspirants from a multitude of disciplines and trades.
Download or read book Recent Advances in Mathematics for Engineering written by Mangey Ram and published by CRC Press. This book was released on 2020-03-17 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, mathematics has experienced amazing growth in the engineering sciences. Mathematics forms the common foundation of all engineering disciplines. This book provides a comprehensive range of mathematics applied in various fields of engineering for different tasks such as civil engineering, structural engineering, computer science, and electrical engineering, among others. It offers chapters that develop the applications of mathematics in engineering sciences, conveys the innovative research ideas, offers real-world utility of mathematics, and has a significance in the life of academics, practitioners, researchers, and industry leaders. Features Focuses on the latest research in the field of engineering applications Includes recent findings from various institutions Identifies the gaps in the knowledge in the field and provides the latest approaches Presents international studies and findings in modeling and simulation Offers various mathematical tools, techniques, strategies, and methods across different engineering fields
