Download or read book Recent Advances in Analysis of Heat Transfer for Fin Type Surfaces written by Bengt Sundén and published by Witpress. This book was released on 2000 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descripción del editor: "This volume is concerned with the heat transfer from extended surfaces, such as fins attached to a primary transfer surface. These are used extensively within heat exchanges and on heat transfer equipment to ensure that a specified rate of heat transfer is achieved between a heat source and sink. All of the chapters come from invited contributors and follow a unified outline and presentation.Contents: Overview of Extended Surface Heat Transfer ââ,¬â€œ Fins; Coupled Forced Convection, Conduction and Thermal Radiation of a Rectangular Fin in a Confined Space; Mechanistic Investigation of the Performance of a Triangular Fin; Conjugate Free and Mixed Convection Heat Transfer from a Vertical Fin Embedded in a Porous Medium; About Fin Performance and Optimization; Two-Dimensional Effects in Extended Surface Assessment; Steady-State Heat Transfer and Performance Assessment; Multi-Louvred Fin Surfaces; Methodology for the Design of Multi-Stream Plate-Fin Heat Exchangers; Incorporation of a Consideration of Operability into the Design of Multi-Stream Heat Exchangers." (WIT Press).
Download or read book Extended Surface Heat Transfer written by Allan D. Kraus and published by John Wiley & Sons. This book was released on 2002-03-14 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drei anerkannte Experten dieses schnellebigen, modernen Fachgebiets erläutern hier Theorie, Design und Anwendungen eines breiten Spektrums von Oberflächen, die speziell für den effizienten Wärmetransport ausgelegt sind. Behandelt werden u. a. kompakte Wärmetauscher, periodische Wärmeströme und Siedevorgänge an Kühlrippen. Umfassend und informativ!
Download or read book Heat Transfer Enhancement in Plate and Fin Extended Surfaces written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-06-24 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief deals with heat transfer and friction in plate and fin extended heat transfer enhancement surfaces. It examines Offset-Strip Fin (OSF), Enhancement Principle, Analytically Based Models for j and f vs. Re, Transition from Laminar to Turbulent Region, Correlations for j and f vs. Re, Use of OSF with Liquids, Effect of Percent Fin Offset, Effect of Burred Edges, Louver fin, heat transfer and friction correlations, flow structure in the louver fin array, analytical model for heat transfer and friction, convex louver fin, wavy fin, 3D corrugated fin, perforated fin, pin fins and wire mesh, types of vortex generators, metal foam fin, plain fin, packings, numerical simulation of various types of fins.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 2000-10-31 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than is allowable in either journals or texts.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1998-05-18 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer
Download or read book Recent Advances in Computational and Experimental Mechanics Vol II written by D. K. Maiti and published by Springer Nature. This book was released on 2022-02-26 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.
Download or read book Convection in Porous Media written by D.A. Nield and published by Springer Science & Business Media. This book was released on 2006-02-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonprofit organizations are suffering from the continuing economic downturn. Donations are decreasing while demand for services is growing, forcing these organizations to be increasingly efficient and effective with their funds. This book introduces the reader to the basic concepts of project management. It provides approaches and templates to help nonprofit managers quickly implement practices to help them manage their limited resources, both financial and volunteer. The book also provides a tool to help the project team determine which practices are most appropriate. The book explores how social media and other technology tools can be used to assist in the management of time-sensitive projects and shows how project portfolio management can be a tool to assist in communications with boards of directors and other governing entities. The project portfolio is a tool that development office managers can easily implement and adopt to facilitate resource assignment. Finally, the book offers three case studies of nonprofit projects that went awry and shows how project management would have assisted.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 1995-05-25 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than is allowablein either journals or texts.
Download or read book Handbook of Porous Media written by Kambiz Vafai and published by CRC Press. This book was released on 2000-07-12 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Presents the most important and up-to-date research related to heat transfer in porous media, focusing on practical applications of the latest studies to engineering products and procedures. Includes theoretical models of fluid flow, capillary effects, application of fractal and percolation characterizing porous materials, multiphase flow and heat transfer, turbulent flow and heat transfer, improved measurement and flow visualization techniques, and enhanced design correlations."
Download or read book Fin Shape Thermal Optimization Using Bejan s Constuctal Theory written by Giulio Lorenzini and published by Springer Nature. This book was released on 2022-05-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains research results obtained by applying Bejan's Constructal Theory to the study and therefore the optimization of fins, focusing on T-shaped and Y-shaped ones. Heat transfer from finned surfaces is an example of combined heat transfer natural or forced convection on the external parts of the fin, and conducting along the fin. Fin's heat exchange is rather complex, because of variation of both temperature along the fin and convective heat transfer coefficient. Furthermore possible presence of more fins invested by the same fluid flow has to be considered. Classical fin theory tried to reduce the coupled heat transfer problem to a one-dimensional problem by defining an average temperature of the fin and writing equations using this parameter. However, it was shown that this approach cannot be used because of the effects of two-dimensional heat transfer, especially in the presence of short fins. CFD codes offer the possibility to consider bi-dimensional (and more generally, three-dimensional) effects and then a more real approach to the physic phenomena of finned surface's heat exchange. A commercial CFD code was used to analyse the case of heat exchange in presence of T-shaped fins, following an approach suggested by Bejan's Constructal Theory. The comparative results showed a significant agreement with previous research taken as a reference, and this result allows for the application of this approach to a wider range of systems. T-shaped optimized fin geometry is the starting point for further research. Starting from the optimal results (T-shape optimized fins), we show the trend of the assessment parameter (the dimensionless conductance) in function of the angle a between the two horizontal arms of the fin. A value for a, 90°
Download or read book Two Phase Heat Transfer Enhancement written by Sujoy Kumar Saha and published by Springer. This book was released on 2019-07-04 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief concerns heat transfer and pressure drop in heat transfer enhancement for boiling and condensation. The authors divide their topic into six areas: abrasive treatment and coatings, combined structured and porous surfaces, basic principles of boiling mechanism, vapor space condensation, convective vaporization, and forced condensation inside tubes. Within this framework, the book examines range of specific phenomena including abrasive treatment, open grooves, 3D cavities, etched surfaces, electroplating, pierced 3D cover sheets, attached wire and screen promoters, non-wetting coatings, oxide and ceramic coatings, porous surfaces, structured surfaces (integral roughness), combined structured and porous surfaces, composite surfaces, single-tube pool boiling tests, theoretical fundamentals like liquid superheat, effect of cavity shape and contact angle on superheat, entrapment of vapor in cavities, nucleation at a surface cavity, effect of dissolved gases, bubble departure diameter, bubble dynamics, boiling hysteresis and orientation effects, basic principles of boiling mechanism, visualization and mechanism of boiling in subsurface tunnels, and Chien and Webb parametric boiling studies.
Download or read book Convective Heat Transfer written by I. Pop and published by Elsevier. This book was released on 2001-02-23 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in studying the phenomena of convective heat and mass transfer between an ambient fluid and a body which is immersed in it stems both from fundamental considerations, such as the development of better insights into the nature of the underlying physical processes which take place, and from practical considerations, such as the fact that these idealised configurations serve as a launching pad for modelling the analogous transfer processes in more realistic physical systems. Such idealised geometries also provide a test ground for checking the validity of theoretical analyses. Consequently, an immense research effort has been expended in exploring and understanding the convective heat and mass transfer processes between a fluid and submerged objects of various shapes. Among several geometries which have received considerable attention are plates, circular and elliptical cylinders, and spheres, although much information is also available for some other bodies, such as corrugated surfaces or bodies of relatively complicated shapes. The book is a unified progress report which captures the spirit of the work in progress in boundary-layer heat transfer research and also identifies potential difficulties and areas for further study. In addition, this work provides new material on convective heat and mass transfer, as well as a fresh look at basic methods in heat transfer. Extensive references are included in order to stimulate further studies of the problems considered. A state-of-the-art picture of boundary-layer heat transfer today is presented by listing and commenting also upon the most recent successful efforts and identifying the needs for further research.
Download or read book Design and Operation of Heat Exchangers and their Networks written by Wilfried Roetzel and published by Academic Press. This book was released on 2019-10-04 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of heat Exchangers and Their Networks presents a comprehensive and detailed analysis on the thermal design methods for the most common types of heat exchangers, with a focus on their networks, simulation procedures for their operations, and measurement of their thermal performances. The book addresses the fundamental theories and principles of heat transfer performance of heat exchangers and their applications and then applies them to the use of modern computing technology. Topics discussed include cell methods for condensers and evaporators, dispersion models for heat exchangers, experimental methods for the evaluation of heat exchanger performance, and thermal calculation algorithms for multi-stream heat exchangers and heat exchanger networks. Includes MATLAB codes to illustrate how the technologies and methods discussed can be easily applied and developed. Analyses a range of different models, applications, and case studies in order to reveal more advanced solutions for industrial applications. Maintains a strong focus on the fundamental theories and principles of the heat transfer performance of heat exchangers and their applications for complex flow arrangement.
Download or read book Introduction to Heat Transfer written by Bengt Sundén and published by WIT Press. This book was released on 2012 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the basic mechanisms for transfer of heat, this book gives a deeper and more comprehensive view than existing titles on the subject. Derivation and presentation of analytical and empirical methods are provided for calculation of heat transfer rates and temperature fields as well as pressure drop. The book covers thermal conduction, forced and natural laminar and turbulent convective heat transfer, thermal radiation including participating media, condensation, evaporation and heat exchangers. This book is aimed to be used in both undergraduate and graduate courses in heat transfer and thermal engineering. It can successfully be used in R & D work and thermal engineering design in industry and by consultancy firms
Download or read book Fin Shape Thermal Optimization Using Bejan s Constuctal Theory written by Giulio Lorenzini and published by Morgan & Claypool Publishers. This book was released on 2011-01-02 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains research results obtained by applying Bejan's Constructal Theory to the study and therefore the optimization of fins, focusing on T-shaped and Y-shaped ones. Heat transfer from finned surfaces is an example of combined heat transfer natural or forced convection on the external parts of the fin, and conducting along the fin. Fin's heat exchange is rather complex, because of variation of both temperature along the fin and convective heat transfer coefficient. Furthermore possible presence of more fins invested by the same fluid flow has to be considered. Classical fin theory tried to reduce the coupled heat transfer problem to a one-dimensional problem by defining an average temperature of the fin and writing equations using this parameter. However, it was shown that this approach cannot be used because of the effects of two-dimensional heat transfer, especially in the presence of short fins. CFD codes offer the possibility to consider bi-dimensional (and more generally, three-dimensional) effects and then a more real approach to the physic phenomena of finned surface's heat exchange. A commercial CFD code was used to analyse the case of heat exchange in presence of T-shaped fins, following an approach suggested by Bejan's Constructal Theory. The comparative results showed a significant agreement with previous research taken as a reference, and this result allows for the application of this approach to a wider range of systems. T-shaped optimized fin geometry is the starting point for further research. Starting from the optimal results (T-shape optimized fins), we show the trend of the assessment parameter (the dimensionless conductance) in function of the angle α between the two horizontal arms of the fin. A value for α, 90°
Download or read book Advances in Enhanced Heat Transfer written by and published by . This book was released on 1979 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Thermal Sciences and Engineering written by Hemant B. Mehta and published by Springer Nature. This book was released on 2023-05-05 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advances in Fluid Flow and Thermal Sciences (ICAFFTS 2021) and summarizes the modern research practices in thermal sciences and engineering. The content of book involves advanced topics in heat transfer science, automobile, refrigeration and air conditioning, cryogenics, non-conventional systems and energy storage. Topics on cutting edge research in the area of hybrid nano-PCM-based systems, solar-based applications, bio-diesel and nano additives-based combustion, fuel cell and thermoacoustic engine are also included. In addition, this book contains recent research in the area of two-phase thermal management of Li-Ion/Li-titanium battery and LED systems using heat sink, heat pipe, pulsating heat pipe and thermosyphon with next-generation refrigerants, PCM and nanofluid. Some thermal aspects of virus/aerosol research, advances in volumetric velocimetry and application of artificial intelligence in thermal systems are also covered. This book is a valuable reference for academicians, researchers and professionals working in the various fields of thermal sciences.
