Download or read book Spark Ignition Engine Knock Detection Using In cylinder Optical Probes written by Zhihong Sun and published by . This book was released on 1997 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Spark Ignition Engine Modeling and Control System Design written by Amir-Mohammad Shamekhi and published by CRC Press. This book was released on 2023-02-22 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a step-by-step guide to the engine control system design, providing case studies and a thorough analysis of the modeling process using machine learning, and model predictive control (MPC). Covering advanced processes alongside the theoretical foundation, MPC enables engineers to improve performance in both hybrid and non-hybrid vehicles. Control system improvement is one of the major priorities for engineers seeking to enhance an engine. Often possible on a low budget, substantial improvements can be made by applying cutting-edge methods, such as artificial intelligence when modeling engine control system designs and using MPC. This book presents approaches to control system improvement at mid, low, and high levels of control. Beginning with the model-in-the-loop hierarchical control design of ported fuel injection SI engines, this book focuses on optimal control of both transient and steady state and also discusses hardware-in-the-loop. The chapter on low-level control discusses adaptive MPC and adaptive variable functioning, as well as designing a fuel injection feed-forward controller. At mid-level control, engine calibration maps are discussed, with consideration of constraints such as limits on pollutant emissions. Finally, the high-level control methodology is discussed in detail in relation to transient torque control of SI engines. This comprehensive yet clear guide to control system improvement is an essential read for any engineer working in automotive engineering and engine control system design.

Download or read book 15th European Workshop on Advanced Control and Diagnosis ACD 2019 written by Elena Zattoni and published by Springer Nature. This book was released on 2022-06-13 with total page 1441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, published in two volumes, embodies the proceedings of the 15th European Workshop on Advanced Control and Diagnosis (ACD 2019) held in Bologna, Italy, in November 2019. It features contributed and invited papers from academics and professionals specializing in an important aspect of control and automation. The book discusses current theoretical research developments and open problems and illustrates practical applications and industrial priorities. With a focus on both theory and applications, it spans a wide variety of up-to-date topics in the field of systems and control, including robust control, adaptive control, fault-tolerant control, control reconfiguration, and model-based diagnosis of linear, nonlinear and hybrid systems. As the subject coverage has expanded to include cyber-physical production systems, industrial internet of things and sustainability issues, some contributions are of an interdisciplinary nature, involving ICT disciplines and environmental sciences. This book is a valuable reference for both academics and professionals in the area of systems and control, with a focus on advanced control, automation, fault diagnosis and condition monitoring.

Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Download or read book Modeling of Real Fuels and Knock Occurrence for an Effective 3D CFD Virtual Engine Development written by Francesco Cupo and published by Springer Nature. This book was released on 2020-09-14 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: To drastically reduce the emission of greenhouse gases, the development of future internal combustion engines will be strictly linked to the development of CO2 neutral fuels (e.g. biofuels and e-fuels). This evolution implies an increase in development complexity, which needs the support of engine 3D-CFD simulations. Francesco Cupo presents approaches to accurately describe fuel characteristics and knock occurrence in SI engines, thus improving the current simulation capability in investigating alternative fuels and innovative combustion processes. The developed models are successfully used to investigate the influence of ethanol-based fuels and water injection strategies on knock occurrence and to conduct a virtual fuel design for and engine operating with the innovative SACI combustion strategy.

Download or read book New Strategies for Detecting Knock in Spark Ignition Engines written by T. A. Fauzi Soelaiman and published by . This book was released on 1992 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of China SAE Congress 2020 Selected Papers written by China Society of Automotive Engineers and published by Springer Nature. This book was released on 2022-01-13 with total page 1670 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather outstanding papers presented at the China SAE Congress 2020, held on Oct. 27-29, Shanghai, China. Featuring contributions mainly from China, the biggest carmaker as well as most dynamic car market in the world, the book covers a wide range of automotive-related topics and the latest technical advances in the industry. Many of the approaches in the book will help technicians to solve practical problems that affect their daily work. In addition, the book offers valuable technical support to engineers, researchers and postgraduate students in the field of automotive engineering.

Download or read book Cyber physical Systems and Digital Twins written by Michael E. Auer and published by Springer. This book was released on 2019-07-10 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 16th International Conference on Remote Engineering and Virtual Instrumentation (REV), held at the BMS College of Engineering, Bangalore, India on 3–6 February 2019. Today, online technologies are at the core of most fields of engineering, as well as of society as a whole, and are inseparably connected with Internet of Things, cyber-physical systems, collaborative networks and grids, cyber cloud technologies, service architectures, to name but a few. Since it was first held in, 2004, the REV conference has focused on the increasing use of the Internet for engineering tasks and the problems surrounding it. The 2019 conference demonstrated and discussed the fundamentals, applications and experiences in the field of online engineering and virtual instrumentation. It also presented guidelines for university-level courses on these topics, in view of the increasing globalization of education and the demand for teleworking, remote services and collaborative working environments.

Download or read book 6th International Conference on Ignition Systems for SI Engines 7th International Conference on Knocking in SI Engines written by Marc Sens and published by expert verlag. This book was released on 2024-10-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to the indisputably necessary electrification of the transport sector, which is currently being ramped up, internal combustion engines will still be urgently needed in the future. Otherwise, the demand for mobility in the on-road, off-road and non-road sectors cannot be met. There is no doubt that these internal combustion engines will have to be improved regarding efficiency plus lower emissions and nowadays more and more important upgraded for zero and low carbon fuels. Even though Spark Ignition (SI) engines have been around for more than a century, there is still a lot of room for improvement, particularly in terms of power density, ignition, combustion control, and preventing uncontrolled combustion. To offer all interested developers an inspiring exchange platform for the latest developments, IAV established two exciting conferences more than two decades ago, which are now held under the heading "Two Conferences - One Goal". This volume brings together the contributions to this conference.

Download or read book Characteristics and Control of Low Temperature Combustion Engines written by Rakesh Kumar Maurya and published by Springer. This book was released on 2017-11-03 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with novel advanced engine combustion technologies having potential of high fuel conversion efficiency along with ultralow NOx and particulate matter (PM) emissions. It offers insight into advanced combustion modes for efficient utilization of gasoline like fuels. Fundamentals of various advanced low temperature combustion (LTC) systems such as HCCI, PCCI, PPC and RCCI engines and their fuel quality requirements are also discussed. Detailed performance, combustion and emissions characteristics of futuristic engine technologies such as PPC and RCCI employing conventional as well as alternative fuels are analyzed and discussed. Special emphasis is placed on soot particle number emission characterization, high load limiting constraints, and fuel effects on combustion characteristics in LTC engines. For closed loop combustion control of LTC engines, sensors, actuators and control strategies are also discussed. The book should prove useful to a broad audience, including graduate students, researchers, and professionals Offers novel technologies for improved and efficient utilization of gasoline like fuels; Deals with most advanced and futuristic engine combustion modes such as PPC and RCCI; Comprehensible presentation of the performance, combustion and emissions characteristics of low temperature combustion (LTC) engines; Deals with closed loop combustion control of advanced LTC engines; State-of-the-art technology book that concisely summarizes the recent advancements in LTC technology. .

Download or read book Automotive Engines written by Alexander A. Stotsky and published by Springer Science & Business Media. This book was released on 2009-04-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing demands on the output performance, exhaust emissions, and fuel consumption necessitate the development of a new generation of automotive engine functionality. This monograph is written by a long year developmental automotive engineer and offers a wide coverage of automotive engine control and estimation problems and its solutions. It addresses idle speed control, cylinder flow estimation, engine torque and friction estimation, engine misfire and CAM profile switching diagnostics, as well as engine knock detection. The book provides a wide and well structured collection of tools and new techniques useful for automotive engine control and estimation problems such as input estimation, composite adaptation, threshold detection adaptation, real-time algorithms, as well as the very important statistical techniques. It demonstrates the statistical detection of engine problems such as misfire or knock events and how it can be used to build a new generation of robust engine functionality. This book will be useful for practising automotive engineers, black belts working in the automotive industry as well as for lecturers and students since it provides a wide coverage of engine control and estimation problems, detailed and well structured descriptions of useful techniques in automotive applications and future trends and challenges in engine functionality.

Download or read book Liquid Piston Engines written by Aman Gupta and published by John Wiley & Sons. This book was released on 2017-07-24 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book available on liquid piston engines, covering the design, application, maintenance, troubleshooting, and advances in the technology. Whether used in irrigation, cooling nuclear reactors, pumping wastewater, or any number of other uses, the liquid piston engine is a much more efficient, effective, and "greener" choice than many other choices available to industry. Especially if being used in conjunction with solar panels, the liquid piston engine can be extremely cost-effective and has very few, if any, downsides or unwanted side effects. As industries all over the world become more environmentally conscious, the liquid piston engine will continue growing in popularity as a better choice, and its low implementation and operational costs will be attractive to end-users in developing countries. This is the only comprehensive, up-to-date text available on liquid piston engines. The first part focuses on the identification, design, construction and testing of the liquid piston engine, a simple, yet elegant, device which has the ability to pump water but which can be manufactured easily without any special tooling or exotic materials and which can be powered from either combustion of organic matter or directly from solar heating. It has been tested, and the authors recommend how it might be improved upon. The underlying theory of the device is also presented and discussed. The second part deals with the performance, troubleshooting, and maintenance of the engine. This volume is the only one of its kind, a groundbreaking examination of a fascinating and environmentally friendly technology which is useful in many industrial applications. It is a must-have for any engineer, manager, or technician working with pumps or engines.

Download or read book Embedded Microprocessor Systems written by Christian Müller-Schloer and published by IOS Press. This book was released on 1996 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded microprocessor systems are affecting our daily lives at a fast pace, mostly unrecognised by the general public. Most of us are aware of the part they are playing in increasing business efficiency through office applications such as personal computers, printers and copiers. Only a few people, however, fully appreciate the growing role of embedded systems in telecommunications and industrial environments, or even in everyday products like cars and home appliances. The challenge to engineers and managers is not only highlighted by the sheer size of the market, ' 1.5 billion microcontrollers and microprocessors are produced every year ' but also by the accelerating innovation in embedded systems towards higher complexity in hardware, software and tools as well as towards higher performance and lower consumption. To maintain competitiveness in this demanding environment, an optimum mix of innovation, time to market and system cost is required. Choosing the right options and strategies for products and companies is crucial and rarely obvious. In this book the editors have, therefore, skilfully brought together more than fifty contributions from some of the leading authorities in embedded systems. The papers are conveniently grouped in four sections.

Download or read book Reciprocating Engine Combustion Diagnostics written by Rakesh Kumar Maurya and published by Springer. This book was released on 2019-03-19 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-cylinder pressure measurement and its post-processing for combustion quality analysis of conventional and advanced reciprocating engines. It offers insight into knocking and combustion stability analysis techniques and algorithms in SI, CI, and LTC engines, and places special emphasis on the digital signal processing of in-cylinder pressure signal for online and offline applications. The text gives a detailed description on sensors for combustion measurement, data acquisition, and methods for estimation of performance and combustion parameters. The information provided in this book enhances readers’ basic knowledge of engine combustion diagnostics and serves as a comprehensive, ready reference for a broad audience including graduate students, course instructors, researchers, and practicing engineers in the automotive, oil and other industries concerned with internal combustion engines.

Download or read book Advanced Anomaly Detection Technologies and Applications in Energy Systems written by Tinghui Ouyang and published by Frontiers Media SA. This book was released on 2022-10-14 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Spring Technical Conference and published by . This book was released on 2006 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of China SAE Congress 2022 Selected Papers written by China Society of Automotive Engineers and published by Springer Nature. This book was released on 2023-05-30 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the China SAE Congress 2022, featuring contributions mainly from China, the biggest carmaker as well as most dynamic car market in the world. The book covers a wide range of automotive-related topics and the latest technical advances in the industry. Many of the approaches in the book help technicians to solve practical problems that affect their daily work. In addition, the book offers valuable technical support to engineers, researchers, and postgraduate students in the field of automotive engineering.