Download or read book Rapid Modeling and Analysis Tools written by Norman F. Knight and published by . This book was released on 2002 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rapid Modeling and Analysis Tools Evolution Status Needs and Directions written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-24 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced aerospace systems are becoming increasingly more complex, and customers are demanding lower cost, higher performance, and high reliability. Increased demands are placed on the design engineers to collaborate and integrate design needs and objectives early in the design process to minimize risks that may occur later in the design development stage. High performance systems require better understanding of system sensitivities much earlier in the design process to meet these goals. The knowledge, skills, intuition, and experience of an individual design engineer will need to be extended significantly for the next generation of aerospace system designs. Then a collaborative effort involving the designer, rapid and reliable analysis tools and virtual experts will result in advanced aerospace systems that are safe, reliable, and efficient. This paper discusses the evolution, status, needs and directions for rapid modeling and analysis tools for structural analysis. First, the evolution of computerized design and analysis tools is briefly described. Next, the status of representative design and analysis tools is described along with a brief statement on their functionality. Then technology advancements to achieve rapid modeling and analysis are identified. Finally, potential future directions including possible prototype configurations are proposed.Knight, Norman F., Jr. and Stone, Thomas J. and Ransom, Jonathan B. (Technical Monitor)Langley Research CenterAEROSPACE SYSTEMS; DESIGN ANALYSIS; STRUCTURAL ANALYSIS; COMPUTER AIDED DESIGN; ENGINEERS; RELIABILITY; RISK
Download or read book Rapid Modeling and Analysis Tools Evolution Status Needs and Directions written by and published by . This book was released on 2002 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Achieving Quality in Software written by S. Bologna and published by Springer. This book was released on 2013-11-11 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software quality is a generalised statement difficult to agree or disagree with until a precise definition of the concept of "Software Quality" is reached in terms of measurable quantities. Unfortunately, for the software technology the basic question of: • what to measure; • how to measure; • when to measure; • how to deal with the data obtained are still unanswered and are also closely dependant on the field of application. In the past twenty years or more there have been a number of conferences and debates focusing on the concept of Software Quality, which produced no real industrial impact. Recently, however, the implementation of a few generic standards (ISO 9000, IEEE etc.) has produced and improved application of good practice principles at the industrial level. As a graduate in PhYSiCS, I still believe it is a long way before the concept of Software Quality can be defined exactly and measured, if ever. This is way I think the AQuIS series of conferences is important, its object begin to provide a platform for the transfer of technology and know how between Academic, Industrial and Research Institutions, in the field of Software Quality. Their objects are: • to provide a forum for the introduction and discussion of new research breakthroughs in Software Quality; • to provide professional Software Quality engineers with the necessary exposure to the results of current research; • to expose the research community to the problems of practical application of new results.
Download or read book Design Reuse In Product Development Modeling Analysis And Optimization written by Soh Khim Ong and published by World Scientific. This book was released on 2008-11-21 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient management of product information is vital for manufacturing enterprises in this information age. Considering the proliferation of product information, tight production schedules, and intense market competition, human intelligence alone cannot meet the requirements of efficient product development. Technologies and tools that support information management are urgently needed. This volume presents the design reuse methodology to support product development. Significant efforts have been made to create an intelligent and optimal design environment by incorporating the contemporary technologies in product family design, artificial intelligence, neural networks, information theories, etc. This volume covers both theoretical topics and implementation strategies, with detailed case studies to help readers gain an insight in areas such as product information modeling, information analysis, engineering optimization, production cost estimation, and product performance evaluation.
Download or read book Innovations for Requirement Analysis From Stakeholders Needs to Formal Designs written by Barbara Paech and published by Springer Science & Business Media. This book was released on 2008-12 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the thoroughly refereed and revised proceedings of the 14th Monterey workshop, held in Monterey, CA, USA, September 10-13, 2007. The theme of the workshop was Innovations for Requirement Analysis: From Stakeholders' Needs to Formal Designs. The 10 revised full papers included in the book were carefully selected during two rounds of reviewing and revision. These are preceded by the abstracts of the three keynote talks as well as a detailed introduction to the theme of the workshop, including a case study used by many participants to frame their analyses, and a summary of the workshop's results. The full papers have been grouped thematically under the headings Innovative Requirements Engineering Techniques and Innovative Applications of Natural-Language Processing Techniques.
Download or read book Systems Engineering for Business Process Change New Directions written by Peter Henderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Engineering for Business Process Change: New Directions is a collection of papers resulting from an EPSRC managed research programme set up to investigate the relationships between Legacy IT Systems and Business Processes. The papers contained in this volume report the results from the projects funded by the programme, which ran between 1997 and 2001. An earlier volume, published in 2000, reported interim results. Bringing together researchers from diverse backgrounds in Computer Science, Information Systems, Engineering and Business Schools, this book explores the problems experienced by IT-dependent businesses that have to implement changing business processes in the context of their investment in legacy systems. The book presents some of the solutions investigated through the collaborations set up within the research programme. Whether you are a researcher interested in the ideas that were generated by the research programme, or a user trying to understand the nature of the problems and their solutions, you cannot fail to be inspired by the writings contained in this volume.
Download or read book History of Soybeans and Soyfoods in Ohio written by William Shurtleff; Akiko Aoyagi and published by Soyinfo Center. This book was released on 2022-05-13 with total page 1462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world's most comprehensive, well documented, and well illustrated book on this subject. With extensive subject and geographic index. 114 photographs and illustrations - mostly color. Free of charge in digital PDF format.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spatial Modeling and Assessment of Urban Form written by Biswajeet Pradhan and published by Springer. This book was released on 2017-05-08 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the application of Geospatial data, Geographic Information System (GIS) and Remote Sensing (RS) technologies in analysis and modeling of urban growth process, and its pattern, with special focus on sprawl and compact form of urban development. The book explains these two kinds of urban forms (sprawl and compact urban development) in detail regarding their advantages, disadvantages, indicators, assessment, modeling, implementation and their relationship with urban sustainability. It confirms that the proposed modeling approaches, geospatial data and GIS are very practical for identifying urban growth, land use change patterns and their general trends in future. The analyses and modeling approaches presented in this book can be employed to guide the identification and measurements of the changes and growth likely to happen in urban areas. In addition, this book can be helpful for town planning and development in order to design urban areas in a compact form and eventually sustainable manner.
Download or read book Tool and Manufacturing Engineers Handbook Manufacturing Management written by Raymond F. Veilleux and published by Society of Manufacturing Engineers. This book was released on 1988-12-12 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers, corporate managers, project managers, and production managers will use Manufacturing Management to answer important planning questions, manage new systems and technologies, and to integrate design, engineering, and manufacturing to bring products to market faster at the most competitive cost. Volume 5 also helps you focus on management' s role in quality programs such as setting objectives, monitoring outcomes, and how to make continuous quality improvements while reducing quality costs.
Download or read book A Cost benefit Analysis of the National Map written by David Halsing and published by . This book was released on 2004 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Challenges of Information Technology Management in the 21st Century written by Information Resources Management Association. International Conference and published by IGI Global. This book was released on 2000 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the 21st century begins, we are faced with opportunities and challenges of available technology as well as pressured to create strategic and tactical plans for future technology. Worldwide, IT professionals are sharing and trading concepts and ideas for effective IT management, and this co-operation is what leads to solid IT management practices. This volume is a collection of papers that present IT management perspectives from professionals around the world. The papers seek to offer new ideas, refine old ones, and pose interesting scenarios to help the reader develop company-sensitive management strategies.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1991-10 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods for Petroleum Well Optimization written by Rasool Khosravanian and published by Gulf Professional Publishing. This book was released on 2021-09-22 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drilling and production wells are becoming more digitalized as oil and gas companies continue to implement machine learning andbig data solutions to save money on projects while reducing energy and emissions. Up to now there has not been one cohesiveresource that bridges the gap between theory and application, showing how to go from computer modeling to practical use. Methodsfor Petroleum Well Optimization: Automation and Data Solutions gives today's engineers and researchers real-time data solutionsspecific to drilling and production assets. Structured for training, this reference covers key concepts and detailed approaches frommathematical to real-time data solutions through technological advances. Topics include digital well planning and construction,moving teams into Onshore Collaboration Centers, operations with the best machine learning (ML) and metaheuristic algorithms,complex trajectories for wellbore stability, real-time predictive analytics by data mining, optimum decision-making, and case-basedreasoning. Supported by practical case studies, and with references including links to open-source code and fit-for-use MATLAB, R,Julia, Python and other standard programming languages, Methods for Petroleum Well Optimization delivers a critical training guidefor researchers and oil and gas engineers to take scientifically based approaches to solving real field problems. - Bridges the gap between theory and practice (from models to code) with content from the latest research developments supported by practical case study examples and questions at the end of each chapter - Enables understanding of real-time data solutions and automation methods available specific to drilling and production wells, suchas digital well planning and construction through to automatic systems - Promotes the use of open-source code which will help companies, engineers, and researchers develop their prediction and analysissoftware more quickly; this is especially appropriate in the application of multivariate techniques to the real-world problems of petroleum well optimization
Download or read book Handbook of Research on Big Data Storage and Visualization Techniques written by Segall, Richard S. and published by IGI Global. This book was released on 2018-01-05 with total page 1078 pages. Available in PDF, EPUB and Kindle. Book excerpt: The digital age has presented an exponential growth in the amount of data available to individuals looking to draw conclusions based on given or collected information across industries. Challenges associated with the analysis, security, sharing, storage, and visualization of large and complex data sets continue to plague data scientists and analysts alike as traditional data processing applications struggle to adequately manage big data. The Handbook of Research on Big Data Storage and Visualization Techniques is a critical scholarly resource that explores big data analytics and technologies and their role in developing a broad understanding of issues pertaining to the use of big data in multidisciplinary fields. Featuring coverage on a broad range of topics, such as architecture patterns, programing systems, and computational energy, this publication is geared towards professionals, researchers, and students seeking current research and application topics on the subject.
Download or read book Commercial Multimedia Technologies for Twenty First Century Army Battlefields written by National Research Council and published by National Academies Press. This book was released on 1995-11-27 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book responds to an request by the U.S. Army to study the applicability of commercial multimedia technologies to command, control, communications and intelligence needs on future battlefields. After reviewing Army's needs and discussing relevant commercial technologies within the context of a generic architecture, the book recommends approaches for meeting the Army's needs. Battlefield potential is illustrated, andâ€"drawing on lessons learned from the private sectorâ€"a technology management strategy consisting of specific recommendations to the Army is provided. The key to future benefits is for the Army to accommodate the rapid changes taking place in the commercial world of multimedia technologies.
