Download or read book Radiative Heat Transfer in Turbulent Combustion Systems written by Michael F. Modest and published by Springer. This book was released on 2016-01-06 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction reviews why combustion and radiation are important, as well as the technical challenges posed by radiation. Emphasis is on interactions among turbulence, chemistry and radiation (turbulence-chemistry-radiation interactions – TCRI) in Reynolds-averaged and large-eddy simulations. Subsequent chapters cover: chemically reacting turbulent flows; radiation properties, Reynolds transport equation (RTE) solution methods, and TCRI; radiation effects in laminar flames; TCRI in turbulent flames; and high-pressure combustion systems. This Brief presents integrated approach that includes radiation at the outset, rather than as an afterthought. It stands as the most recent developments in physical modeling, numerical algorithms, and applications collected in one monograph.
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Fundamentals of Turbulent and Multiphase Combustion written by Kenneth Kuan-yun Kuo and published by John Wiley & Sons. This book was released on 2012-07-03 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed coverage of advanced combustion topics from the author of Principles of combustion, Second Edition Turbulence, turbulent combustion, and multiphase reacting flows have become major research topics in recent decades due to their application across diverse fields, including energy, environment, propulsion, transportation, industrial safety, and nanotechnology. Most of the knowledge accumulated from this research has never been published in book form—until now. Fundamentals of Turbulent and Multiphase Combustion presents up-to-date, integrated coverage of the fundamentals of turbulence, combustion, and multiphase phenomena along with useful experimental techniques, including non-intrusive, laser-based measurement techniques, providing a firm background in both contemporary and classical approaches. Beginning with two full chapters on laminar premixed and non-premixed flames, this book takes a multiphase approach, beginning with more common topics and moving on to higher-level applications. In addition, Fundamentals of Turbulent and Multiphase Combustion: Addresses seven basic topical areas in combustion and multiphase flows, including laminar premixed and non-premixed flames, theory of turbulence, turbulent premixed and non-premixed flames, and multiphase flows Covers spray atomization and combustion, solid-propellant combustion, homogeneous propellants, nitramines, reacting boundary-layer flows, single energetic particle combustion, and granular bed combustion Provides experimental setups and results whenever appropriate Supported with a large number of examples and problems as well as a solutions manual, Fundamentals of Turbulent and Multiphase Combustion is an important resource for professional engineers and researchers as well as graduate students in mechanical, chemical, and aerospace engineering.
Download or read book The Coen Hamworthy Combustion Handbook written by Stephen Londerville and published by CRC Press. This book was released on 2013-03-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rigorous treatment of combustion can be so complex that the kinetic variables, fluid turbulence factors, luminosity, and other factors cannot be defined well enough to find realistic solutions. Simplifying the processes, The Coen & Hamworthy Combustion Handbook provides practical guidance to help you make informed choices about fuels, burners, and associated combustion equipment—and to clearly understand the impacts of the many variables. Editors Stephen B. Londerville and Charles E. Baukal, Jr, top combustion experts from John Zink Hamworthy Combustion and the Coen Company, supply a thorough, state-of-the-art overview of boiler burners that covers Coen, Hamworthy, and Todd brand boiler burners. A Refresher in Fundamentals and State-of-the-Art Solutions for Combustion System Problems Roughly divided into two parts, the book first reviews combustion engineering fundamentals. It then uses a building-block approach to present specific computations and applications in industrial and utility combustion systems, including those for Transport and introduction of fuel and air to a system Safe monitoring of the combustion system Control of flows and operational parameters Design of a burner/combustion chamber to achieve performance levels for emissions and heat transfer Avoidance of excessive noise and vibration and the extension of equipment life under adverse conditions Coverage includes units, fluids, chemistry, and heat transfer, as well as atomization, computational fluid dynamics (CFD), noise, auxiliary support equipment, and the combustion of gaseous, liquid, and solid fuels. Significant attention is also given to the formation, reduction, and prediction of emissions from combustion systems. Each chapter builds from the simple to the more complex and contains a wealth of practical examples and full-color photographs and illustrations. Practical Computations and Applications for Industrial and Utility Combustion Systems A ready reference and refresher, this unique handbook is designed for anyone involved in combustion equipment selection, sizing, and emissions control. It will help you make calculations and decisions on design features, fuel choices, emissions, controls, burner selection, and burner/furnace combinations with more confidence.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Annual Research Briefs written by Center for Turbulence Research (U.S.) and published by . This book was released on 2010 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Heat Transfer written by and published by . This book was released on 2003 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MILD Combustion Modelling Challenges Experimental Configurations and Diagnostic Tools written by Alessandro Parente and published by Frontiers Media SA. This book was released on 2021-11-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiative Heat Transfer written by Michael F. Modest and published by Academic Press. This book was released on 2021-10-16 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiative Heat Transfer, Fourth Edition is a fully updated, revised and practical reference on the basic physics and computational tools scientists and researchers use to solve problems in the broad field of radiative heat transfer. This book is acknowledged as the core reference in the field, providing models, methodologies and calculations essential to solving research problems. It is applicable to a variety of industries, including nuclear, solar and combustion energy, aerospace, chemical and materials processing, as well as environmental, biomedical and nanotechnology fields. Contemporary examples and problems surrounding sustainable energy, materials and process engineering are an essential addition to this edition. - Includes end-of-chapter problems and a solutions manual, providing a structured and coherent reference - Presents many worked examples which have been brought fully up-to-date to reflect the latest research - Details many computer codes, ranging from basic problem solving aids to sophisticated research tools
Download or read book Industrial Combustion Pollution and Control written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2003-10-15 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference overflows with an abundance of experimental techniques, simulation strategies, and practical applications useful in the control of pollutants generated by combustion processes in the metals, minerals, chemical, petrochemical, waste, incineration, paper, glass, and foods industries. The book assists engineers as they attempt to meet e
Download or read book A Study of Turbulent Nonpremixed Hydrogen Combustion with Different Levels of Modelling and Computation written by Prasad V. R. K. S. Pokkunuri and published by . This book was released on 2007 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Models for Turbulent Reacting Flows written by Rodney O. Fox and published by Cambridge University Press. This book was released on 2003-10-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents
Download or read book The John Zink Combustion Handbook written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2001-03-27 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Industrial applications of combustion add environmental, cost, and fuel consumption issues to its fundamental complexity, and the process and power generation industries in particular present their o
Download or read book Turbulent Combustion written by L. Vervisch and published by . This book was released on 2005 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1973 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Fluid Dynamics in Industrial Combustion written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2000-10-26 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many books have been written on computational fluid dynamics (CFD) and many written on combustion, most contain very limited coverage of the combination of CFD and industrial combustion. Furthermore, most of these books are written at an advanced academic level, emphasize theory over practice, and provide little help to engineers who need