Download or read book Quality of Service Aware Design and Management of Embedded Mixed Criticality Systems written by Behnaz Ranjbar and published by Springer Nature. This book was released on 2023-10-28 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the challenges associated with efficient Mixed-Criticality (MC) system design. We focus on application analysis through execution time analysis and task scheduling analysis in order to execute more low-criticality tasks in the system, i.e., improving the Quality-of-Service (QoS), while guaranteeing the correct execution of high-criticality tasks. Further, this book addresses the challenge of enhancing QoS using parallelism in multi-processor hardware platforms.

Download or read book Design Space Exploration and Resource Management of Multi Many Core Systems written by Amit Kumar Singh and published by MDPI. This book was released on 2021-05-10 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends.

Download or read book AI Embedded Assurance for Cyber Systems written by Cliff Wang and published by Springer Nature. This book was released on 2024-01-13 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth and reliance on cyber systems have permeated our society, government, and military which is demonstrated in this book. The authors discuss how AI-powered cyber systems are designed to protect against cyber threats and ensure the security and reliability of digital systems using artificial intelligence (AI) technologies. As AI becomes more integrated into various aspects of our lives, the need for reliable and trustworthy AI systems becomes increasingly important. This book is an introduction to all of the above-mentioned areas in the context of AI Embedded Assurance for Cyber Systems. This book has three themes. First, the AI/ML for digital forensics theme focuses on developing AI and ML powered forensic tools, techniques, software, and hardware. Second, the AI/ML for cyber physical system theme describes that AI/ML plays an enabling role to boost the development of cyber physical systems (CPS), especially in strengthening the security and privacy of CPS. Third, the AI/ML for cyber analysis theme focuses on using AI/ML to analyze tons of data in a timely manner and identify many complex threat patterns. This book is designed for undergraduates, graduate students in computer science and researchers in an interdisciplinary area of cyber forensics and AI embedded security applications. It is also useful for practitioners who would like to adopt AIs to solve cyber security problems.

Download or read book IoT Automation written by Jerker Delsing and published by CRC Press. This book was released on 2017-02-17 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth description of the Arrowhead Framework and how it fosters interoperability between IoT devices at service level, specifically addressing application. The Arrowhead Framework utilizes SOA technology and the concepts of local clouds to provide required automation capabilities such as: real time control, security, scalability, and engineering simplicity. Arrowhead Framework supports the realization of collaborative automation; it is the only IoT Framework that addresses global interoperability across multiplet SOA technologies. With these features, the Arrowhead Framework enables the design, engineering, and operation of large automation systems for a wide range of applications utilizing IoT and CPS technologies. The book provides application examples from a wide number of industrial fields e.g. airline maintenance, mining maintenance, smart production, electro-mobility, automative test, smart cities—all in response to EU societal challenges. Features Covers the design and implementation of IoT based automation systems. Industrial usage of Internet of Things and Cyber Physical Systems made feasible through Arrowhead Framework. Functions as a design cookbook for building automation systems using IoT/CPS and Arrowhead Framework. Tools, templates, code etc. described in the book will be accessible through open sources project Arrowhead Framework Wiki at forge.soa4d.org/ Written by the leading experts in the European Union and around the globe.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Green Networking written by Francine Krief and published by John Wiley & Sons. This book was released on 2012-12-13 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on green networking, which is an important topic for the scientific community composed of engineers, academics, researchers and industrialists working in the networking field. Reducing the environmental impact of the communications infrastructure has become essential with the ever increasing cost of energy and the need for reducing global CO2 emissions to protect our environment. Recent advances and future directions in green networking are presented in this book, including energy efficient networks (wired networks, wireless networks, mobile networks), adaptive networks (cognitive radio networks, green autonomic networking), green terminals, and industrial research into green networking (smart city, etc.).

Download or read book Model Based Engineering of Collaborative Embedded Systems written by Wolfgang Böhm and published by Springer Nature. This book was released on 2020-12-14 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years.

Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Download or read book Quality Management and Accreditation in Hematopoietic Stem Cell Transplantation and Cellular Therapy written by Mahmoud Aljurf and published by Springer Nature. This book was released on 2021-02-19 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides a concise yet comprehensive overview on how to build a quality management program for hematopoietic stem cell transplantation (HSCT) and cellular therapy. The text reviews all the essential steps and elements necessary for establishing a quality management program and achieving accreditation in HSCT and cellular therapy. Specific areas of focus include document development and implementation, audits and validation, performance measurement, writing a quality management plan, the accreditation process, data management, and maintaining a quality management program. Written by experts in the field, Quality Management and Accreditation in Hematopoietic Stem Cell Transplantation and Cellular Therapy: A Practical Guide is a valuable resource for physicians, healthcare professionals, and laboratory staff involved in the creation and maintenance of a state-of-the-art HSCT and cellular therapy program.

Download or read book Management Information Systems written by Kenneth C. Laudon and published by Pearson Educación. This book was released on 2004 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management Information Systems provides comprehensive and integrative coverage of essential new technologies, information system applications, and their impact on business models and managerial decision-making in an exciting and interactive manner. The twelfth edition focuses on the major changes that have been made in information technology over the past two years, and includes new opening, closing, and Interactive Session cases.

Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.

Download or read book Hard Real Time Computing Systems written by Giorgio C Buttazzo and published by Springer Science & Business Media. This book was released on 2011-09-10 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition offers an indispensable exposition on real-time computing, with particular emphasis on predictable scheduling algorithms. It introduces the fundamental concepts of real-time computing, demonstrates the most significant results in the field, and provides the essential methodologies for designing predictable computing systems used to support time-critical control applications. Along with an in-depth guide to the available approaches for the implementation and analysis of real-time applications, this revised edition contains a close examination of recent developments in real-time systems, including limited preemptive scheduling, resource reservation techniques, overload handling algorithms, and adaptive scheduling techniques. This volume serves as a fundamental advanced-level textbook. Each chapter provides basic concepts, which are followed by algorithms, illustrated with concrete examples, figures and tables. Exercises and solutions are provided to enhance self-study, making this an excellent reference for those interested in real-time computing for designing and/or developing predictable control applications.

Download or read book Embedded Systems Design written by Arnold S. Berger and published by CRC Press. This book was released on 2001-12-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Hardware/Software Partitioning * Cross-Platform Development * Firmware Debugging * Performance Analysis * Testing & Integration Get into embedded systems programming with a clear understanding of the development cycle and the specialized aspects of

Download or read book Digital and Social Media Marketing written by Nripendra P. Rana and published by Springer Nature. This book was released on 2019-11-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines issues and implications of digital and social media marketing for emerging markets. These markets necessitate substantial adaptations of developed theories and approaches employed in the Western world. The book investigates problems specific to emerging markets, while identifying new theoretical constructs and practical applications of digital marketing. It addresses topics such as electronic word of mouth (eWOM), demographic differences in digital marketing, mobile marketing, search engine advertising, among others. A radical increase in both temporal and geographical reach is empowering consumers to exert influence on brands, products, and services. Information and Communication Technologies (ICTs) and digital media are having a significant impact on the way people communicate and fulfil their socio-economic, emotional and material needs. These technologies are also being harnessed by businesses for various purposes including distribution and selling of goods, retailing of consumer services, customer relationship management, and influencing consumer behaviour by employing digital marketing practices. This book considers this, as it examines the practice and research related to digital and social media marketing.

Download or read book Silicon Photonics for High Performance Computing and Beyond written by Mahdi Nikdast and published by CRC Press. This book was released on 2021-11-16 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon photonics is beginning to play an important role in driving innovations in communication and computation for an increasing number of applications, from health care and biomedical sensors to autonomous driving, datacenter networking, and security. In recent years, there has been a significant amount of effort in industry and academia to innovate, design, develop, analyze, optimize, and fabricate systems employing silicon photonics, shaping the future of not only Datacom and telecom technology but also high-performance computing and emerging computing paradigms, such as optical computing and artificial intelligence. Different from existing books in this area, Silicon Photonics for High-Performance Computing and Beyond presents a comprehensive overview of the current state-of-the-art technology and research achievements in applying silicon photonics for communication and computation. It focuses on various design, development, and integration challenges, reviews the latest advances spanning materials, devices, circuits, systems, and applications. Technical topics discussed in the book include: • Requirements and the latest advances in high-performance computing systems • Device- and system-level challenges and latest improvements to deploy silicon photonics in computing systems • Novel design solutions and design automation techniques for silicon photonic integrated circuits • Novel materials, devices, and photonic integrated circuits on silicon • Emerging computing technologies and applications based on silicon photonics Silicon Photonics for High-Performance Computing and Beyond presents a compilation of 19 outstanding contributions from academic and industry pioneers in the field. The selected contributions present insightful discussions and innovative approaches to understand current and future bottlenecks in high-performance computing systems and traditional computing platforms, and the promise of silicon photonics to address those challenges. It is ideal for researchers and engineers working in the photonics, electrical, and computer engineering industries as well as academic researchers and graduate students (M.S. and Ph.D.) in computer science and engineering, electronic and electrical engineering, applied physics, photonics, and optics.

Download or read book MITRE Systems Engineering Guide written by and published by . This book was released on 2012-06-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: