Download or read book Pump Characteristics and Applications Second Edition written by Michael Volk and published by CRC Press. This book was released on 2005-04-07 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hands-on reference offers a practical introduction to pumps and provides the tools necessary to select, size, operate, and maintain pumps properly. It highlights the interrelatedness of pump engineering from system and piping design to installation and startup. This updated second edition expands on many subjects introduced in the first edition and also provides new in-depth discussion of pump couplings, o-rings, motors, variable frequency drives, pump life-cycle cost, corrosion, and pump minimum flow. Written by an acclaimed expert in the field, Pump Characteristics and Applications, Second Edition is an invaluable day-to-day reference for mechanical, civil, chemical, industrial, design, plant, project, and systems engineers; engineering supervisors; maintenance technicians; and plant operators. It is also an excellent text for upper-level undergraduate and graduate students in departments of mechanical engineering, mechanical engineering technology, or engineering technology. About the Author Michael W. Volk, P.E., is President of Volk & Associates, Inc., Oakland, California (www.volkassociates.com), a consulting company specializing in pumps and pump systems. Volk's services include pump training seminars; pump equipment evaluation, troubleshooting, and field testing; expert witness for pump litigation; witnessing of pump shop tests; pump market research; and acquisition and divestiture consultation and brokerage. A member of the American Society of Mechanical Engineers (ASME), and a registered professional engineer, Volk received the B.S. degree (1973) in mechanical engineering from the University of Illinois, Urbana, and the M.S. degree (1976) in mechanical engineering and the M.S. degree (1980) in management science from the University of Southern California, Los Angeles.
Download or read book Pump Characteristics and Applications Third Edition written by Michael Volk and published by CRC Press. This book was released on 2013-10-21 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a wealth of information on pumps and pump systems, Pump Characteristics and Applications, Third Edition details how pump equipment is selected, sized, operated, maintained, and repaired. The book identifies the key components of pumps and pump accessories, introduces the basics of pump and system hydraulics as well as more advanced hydraulic topics, and details various pump types, as well as special materials on seals, motors, variable frequency drives, and other pump-related subjects. It uses example problems throughout the text, reinforcing the practical application of the formulae and analytical presentations. It also includes new images highlighting the latest generation of pumps and other components, explores troubleshooting options, and incorporates relevant additions into the existing chapters. What’s New in This Edition: Includes more than 150 full-color images which significantly improve the reader’s ability to understand pump drawings and curves Introduces a new chapter on pump case studies in a format that provides case study background, analysis, solutions, and lessons learned Presents important new updates and additions to other chapters Includes a ten-step procedure for determining total pump head Discusses allowable and preferred operating ranges for centrifugal pumps Provides charts covering maximum and normally attainable pump efficiencies, performance corrections for slurry pumps, and mechanical seal flush plans Pump Characteristics and Applications, Third Edition is appropriate for readers with all levels of technical experience, including engineering and pump industry professionals, pump operators and maintenance technicians, upper-level undergraduate and graduate students in mechanical engineering, and students in engineering technology programs.
Download or read book Pump Characteristics and Applications written by Michael W. Volk and published by CRC Press. This book was released on 1996-02-14 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical introduction to pumps provides the tools necessary to select, size, operate and maintain pumps properly. It examines the computer software available for system design and pump seletion and contains a 3.5 IBM-compatible demonstration disk that illustrates how software can facilitate the sizing and analysis of piping systems.
Download or read book Pump Characteristics and Applications written by Michael Volk and published by CRC Press. This book was released on 2013-10-21 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a wealth of information on pumps and pump systems, Pump Characteristics and Applications, Third Edition details how pump equipment is selected, sized, operated, maintained, and repaired. The book identifies the key components of pumps and pump accessories, introduces the basics of pump and system hydraulics as well as more advanced hydrau
Download or read book Centrifugal Pumps written by Val S. Lobanoff and published by Elsevier. This book was released on 2013-10-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.
Download or read book Pump Handbook written by Igor Karassik and published by McGraw Hill Professional. This book was released on 2000-10-18 with total page 1850 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major revision of McGraw-Hill's classic handbook that provides practical data and know-how on the design, application, specification, purchase, operation, troublshooting, and maintenance of pumps of every type. It is an essential working tool for engineers in a wide variety of industries all those who are pump specialists, in addition to those who need to acquaint themselves with pump technology. Contributed to by over 75 distinguished professionals and specialists in each and every area of practical pump technology.
Download or read book Pumps written by Ronald Horace Warring and published by Gulf Publishing. This book was released on 1984 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Pumps and Pumping written by Brian Nesbitt and published by Elsevier. This book was released on 2006-10-18 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an experienced engineer, this book contains practical information on all aspects of pumps including classifications, materials, seals, installation, commissioning and maintenance. In addition you will find essential information on units, manufacturers and suppliers worldwide, providing a unique reference for your desk, R&D lab, maintenance shop or library. * Includes maintenance techniques, helping you get the optimal performance out of your pump and reducing maintenance costs * Will help you to understand seals, couplings and ancillary equipment, ensuring systems are set up properly to save time and money * Provides useful contacts for manufacturers and suppliers who specialise in pumps, pumping and ancillary equipment
Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer. This book was released on 2014-10-24 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The discussions of vibrations, noise, unsteady flow phenomena, stability, hydraulic excitation forces and cavitation have been significantly enhanced. To ease the use of the information, the methods and procedures for the various calculations and failure diagnostics discussed in the text are gathered in about 150 pages of tables which may be considered as almost unique in the open literature. The text focuses on practical application in the industry and is free of mathematical or theoretical ballast. In order to find viable solutions in practice, the physical mechanisms involved should be thoroughly understood. The book is focused on fostering this understanding which will benefit the pump engineer in industry as well as academia and students.
Download or read book Pumps written by G. K. Sahu and published by New Age International. This book was released on 2000 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book, Written With An Applications-Oriented Approach, Is Divided Into Four Parts. Part I Covers The General Aspects Of Fluid Flow And Pumps Including The Governing Theories Of Fluid Flow. Part Ii Covers The Design And Construction Of Pumps And Auxiliaries, Drives Etc. Part Iii Presents Pump Selection Criteria And Procurement Actions Including Fittings And Maintenance Requirements. Part Iv Includes Miscellaneous Items Like Key To Symbols, Conversion Tables Etc. For Reference.Various Aspects Of Pumps Have Been Explained In Systematic Detail, Starting From Basic Concepts And Going On To Industrial Applications. The Exposition Is Well Illustrated With Diagrams And Solved Examples.With All These Features, This Is An Invaluable Book For Practicing Engineers And Designers. Mechanical Engineering Students Would Also Find It Extremely Useful.
Download or read book Centrifugal Pumps written by Ward Vaughn and published by Nova Science Publishers. This book was released on 2017 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Chapter One, Fujun Wang, Chaoyue Wang, Zhengjun Yang, Peijian Zhou, and Zhifeng Yao propose and examine a dynamic mixed nonlinear SGS model, with the results indicating that this wall-resolved near-wall solution could capture details more accurately. In Chapter Two, Jos� Gonz�lez and Jes�s M. Fern�ndez present a study wherein the flow in a one stage, single volute centrifugal pump is examined at the Fluid Mechanics Laboratory at the Universidad de Oviedo. In Chapter Three, Hua-Shu Dou, Lulu Zheng, Zuchao Zhu, Xiaoping Chen, and Baoling Cui discuss the evolution of the separating flow and pressure variation distribution around the tongue region in a centrifugal pump. In Chapter Four, Angelo Leto discusses centrifugal pumps for liquid-propellant engines for space propulsion applications. Jamshid H. Karimov, MD, PhD, Shinji Okano, MD, and Kiyotaka Fukamachi, MD, PhD review continuous-flow mechanical circulatory support technology in Chapter Five. Next, Susanta K. Das wraps up the book with an experiment on the effect of impeller vane geometry design on the performance of a centrifugal pump.
Download or read book Fluid Power Pumps and Motors Analysis Design and Control written by Noah D. Manring and published by McGraw Hill Professional. This book was released on 2013-07-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: A COMPLETE GUIDE TO FLUID POWER PUMPS AND MOTORS Written by an expert in the field of fluid power, this book provides proven methods for analyzing, designing, and controlling high-performance axial-piston swash-plate type machinery. Fluid Power Pumps and Motors: Analysis, Design, and Control offers a comprehensive mechanical analysis of hydrostatic machines and presents meticulous design guidelines for machine components. Detailed diagrams and useful formulas are included throughout. Using the results and techniques employed in this practical resource will reduce product delivery lead-time and costs to increase overall efficiency. COVERAGE INCLUDES: Fluid properties | Fluid mechanics | Mechanical analysis Piston pressure | Steady-state results | Machine efficiency Designing a cylinder block, valve plate, piston, slipper, swash plate, and shaft | Displacement controlled pumps Pressure controlled pumps
Download or read book Fundamentals and Application of Centrifugal Pumps for the Practicing Engineer written by Alfred Benaroya and published by . This book was released on 1978 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifugal Pump Handbook written by Sulzer Pumps and published by Butterworth-Heinemann. This book was released on 2010-09-23 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-awaited new edition is the complete reference for engineers and designers working on pump design and development or using centrifugal pumps in the field. This authoritative guide has been developed with access to the technical expertise of the leading centrifugal pump developer, Sulzer Pumps. In addition to providing the most comprehensive centrifugal pump theory and design reference with detailed material on cavitation, erosion, selection of materials, rotor vibration behavior and forces acting on pumps, the handbook also covers key pumping applications topics and operational issues, including operating performance in various types of circuitry, drives and acceptance testing. Enables readers to understand, specify and utilise centrifugal pumps more effectively, drawing on the industry-leading experience of Sulzer Pumps, one of the world's major centrifugal pump developers Covers theory, design and operation, with an emphasis on providing first class quality and efficiency solutions for high capital outlay pump plant users Updated to cover the latest design and technology developments, including applications, test and reliability procedures, cavitation, erosion, selection of materials, rotor vibration behaviour and operating performance in various types of circuitry
Download or read book Centrifugal Pumps written by H.H. Anderson and published by Elsevier. This book was released on 2014-06-28 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Pumps describes the whole range of the centrifugal pump (mixed flow and axial flow pumps are dealt with more briefly), with emphasis on the development of the boiler feed pump. Organized into 46 chapters, this book discusses the general hydrodynamic principles, performance, dimensions, type number, flow, and efficiency of centrifugal pumps. This text also explains the pumps performance; entry conditions and cavitation; speed and dimensions for a given duty; and losses. Some chapters further describe centrifugal pump mechanical design, installation, monitoring, and maintenance. The various types and applications of pumps in the light of the particular design features involved are addressed in other chapters. This book is authoritative, informative, and thought-provoking to an exceptional extent. It establishes a notable advance in the progress of the art of the designer and manufacturer of centrifugal pumps, to the material advantage of the user.
Download or read book Variable Speed Pumping written by Europump & the Hydraulic Insti and published by Elsevier. This book was released on 2004-06-10 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by industry experts from the pump, motor and drive industries under the auspices of Europump and the Hydraulic Institute, this reference book provides a comprehensive guide to variable speed pumping.It includes technical descriptions of pumping systems and their components, and guides the reader through the evaluation of different speed control options.Case studies help illustrate the life cycle cost savings and process improvements that appropriate variable speed pumping can deliver. · Authoritative, global reference to Variable Speed Pumping, by Europump and the Hydraulic Institute· Combines the technical knowledge of pump, motor and control systems in one guide· Brings together all the concepts, metrics and step-by-step decision-making support you need to help you decide which VSD strategies are most appropriate· Will help you design and specify pumping applications that minimise life-cycle costs
Download or read book Centrifugal Pumps written by Igor Karassik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: This last, the education of pump users, is precisely what this book was intended to do. To what extent we must have achieved our purpose, our readers must decide. My good friend and associate, J. T. (Terry) McGuire, and I have been working very closely together for a long time. Our view of engineering problems and of their solutions coincide to an astonishing degree. When I was asked to prepare a second edition of my book Centrifugal Pumps, it was logical that I turned to Terry and suggested that he be my coauthor on this project. He agreed to do so, and his cooperation has been most valuable, both in improving the resultant work and in easing my burden. It would be presumptuous on my part to pretend that nothing has changed in the technology of centrifugal pumps during the 30 years since I prepared the manuscript for the first edition of this book. Let me, then, speak of some of these changes.
