Download or read book Prospects and Conditions for Human Centred Production Systems in British Manufacturing written by Tony Charles and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prospects for Anthropocentric Production Systems in Britain written by Tony Charles and published by . This book was released on 1991 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Management Systems Innovative Production Management Towards Sustainable Growth written by Shigeki Umeda and published by Springer. This book was released on 2015-08-17 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 459 and 460 constitute the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2015, held in Tokyo, Japan, in September 2015. The 163 revised full papers were carefully reviewed and selected from 185 submissions. They are organized in the following topical sections: collaborative networks; globalization and production management; knowledge based production management; project management, engineering management, and quality management; sustainability and production management; co-creating sustainable business processes and ecosystems; open cloud computing architecture for smart manufacturing and cyber physical production systems; the practitioner's view on "innovative production management towards sustainable growth"; the role of additive manufacturing in value chain reconfiguration and sustainability; operations management in engineer-to-order manufacturing; lean production; sustainable system design for green products; cloud-based manufacturing; ontology-aided production - towards open and knowledge-driven planning and control; product-service lifecycle management: knowledge-driven innovation and social implications; and service engineering.
Download or read book Computer Integrated Production Systems and Organizations written by Felix Schmid and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Background to the Institute The NATO Advanced Study Institute (ASI) 'People and Computers - Applying an Anthropocentric Approach to Integrated Production Systems and Organisations' came about after the distribution of a NATO fact sheet to BruneI University, which described the funding of ASls. The 'embryonic' director of the ASI brought this opportunity to the attention of the group of people, (some at BruneI and some from outside), who were together responsible for the teaching and management of the course in Computer Integrated Manufacturing (CIM) in BruneI's Department of Manufacturing and Engineering Systems. This course had been conceived in 1986 and was envisaged as a vehicle for teaching manufacturing engineering students the technology of information integration through project work. While the original idea of the course had also included the organisational aspects of CIM, the human factors questions were not considered. This shortcoming was recognised and the trial run of the course in 1988 contained some lectures on 'people' issues. The course team were therefore well prepared and keen to explore the People, Organisation and Technology (POT) aspects of computer integration, as applied to industrial production. A context was proposed which would allow the inclusion of people from many different backgrounds and which would open up time and space for reflection. The proposal to organise a NATO ASI was therefore welcomed by all concerned.
Download or read book Human Centred Systems in the Global Economy written by Yuji Masuda and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The arrival of the information society in Japan has radically altered the industrial structure, work patterns and cultural values of its society. The innovation and implementation of information technology has accelerated this change and made its effects more profoundly felt. Because of this, there is now a need to widen the debate on human-centred manufacturing systems to include broader issues such as industrial culture, international economies and global knowledge. Human Centred Systems in the Global Economy contains the proceedings of an international workshop held at Tokyo Keizai University which looked at the design of human-centred systems in the context of these technological and social changes. The workshop attracted contributions from internationally known researchers in Europe, Japan, the USA, South East Asia, Eastern Europe and the USSR. The resulting volume is unique in that it addresses the relationship of information technology to Japanese society as a whole, rather than concentrating on technical issues. The papers have been divided into three areas, covering the structure, dimensions, and policies and perspectives of the information society. Specific areas covered include: social and cultural shaping of technology, economic interdependence, technology and knowledge transfer, computer-aided design, management culture and communication technologies. Human Centred Systems in the Global Economy provides a comprehensive assessment of the debates on human-centred systems and will be of interest to people in a wide variety of disciplines including information technology, economic development, management science and related studies of social science and humanities.
Download or read book Catching the Wave written by John A. Mathews and published by Cornell University Press. This book was released on 1994 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Manufacturing Technology XXXVI written by A. Thomas and published by IOS Press. This book was released on 2023-12-14 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like many other fields, the area of manufacturing has advanced massively since the onset of the technological revolution brought about by advances in computing and smart technologies, and with the accelerating globalisation of manufacturing in the 21st century, the urgent need to keep pace has produced further rapid advancements in technology, research, and innovation. This book presents the proceedings of ICMR 2023, the 20th International Conference on Manufacturing Research, held from 6 – 8 September 2023 in Aberystwyth, Wales, UK. This annual conference is a friendly and inclusive platform for a broad community of researchers with the common goal of developing and managing the technologies and operations key to manufacturing. As well as bringing together researchers, academics, and industrialists to share their knowledge and experience, the conference also serves to promote manufacturing-engineering education, training and research. Reflecting the context of Industry 4.0 and beyond, the theme of the 2023 conference is sustainability in smart manufacturing environments. More than 68 papers were submitted for the conference, from which the 33 papers presented here were selected and accepted after a rigorous peer review process; an acceptance rate of 49%. The papers are grouped into 8 sections: operations and supply chain management; manufacturing technology; manufacturing and process modeling; robotics and simulation systems; supply chain systems; process characterization and simulation; operations and supply chain management; and design and prototyping. Providing a wide-ranging overview of advances in the field, the book will be of interest to all those working in manufacturing research.
Download or read book Human Centered AI at Work Common Ground in Theories and Methods written by Annette Kluge and published by Frontiers Media SA. This book was released on 2024-04-26 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research can face artificial intelligence (AI) as an issue of technology development but also as an issue of enacted technology at work. Human-centered design of AI gives emphasis to the expertise and needs of human beings as a starting point of technology development or as an outcome of AI-based work settings. This is an important goal, as expressed, for example, by the international labor organization's call for a "human-centered agenda" for the future of AI and automation collaboration. This Research Topic raises the question of what human-centricity means, i.e. what are the criteria and indicators of human-centered AI and how can they be considered and implemented?
Download or read book Vocational Training written by and published by . This book was released on 1991 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing from Industry 4 0 to Industry 5 0 written by Dimitris Mourtzis and published by Elsevier. This book was released on 2024-06-26 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing from Industry 4.0 to Industry 5.0: Advances and Applications unfolds establishing three main pillars: (i) it investigates the theoretical background of the current industrial practice within the framework of industry 4.0 by presenting its key definitions and backbone technologies; (ii) it discusses the methods and state-of-the-art developments employed in the ongoing digital transformation of companies worldwide to promote more resilient, sustainable, and human-centric smart manufacturing and production networks; and (iii) it outlines a strategic plan for the transition from industry 4.0 to industry 5.0. Written by an international group of expert scientists, this volume offers an overview of the most recent research in the field and provides actionable insights to benefit audiences in both academia and industry. Appeals to readers with its systematic and coherent approach that includes fundamental theoretical concepts as well as applied practical knowledge Includes state-of-the-art information on disruptive smart manufacturing technologies, real-life case studies of their impact in business scenarios, and gap analysis, creating an evidence-based path to recognize the opportunities and challenges originating from an industry 4.0 to industry 5.0 transition Serves as a guide to the next generation of engineers and facilitates making the next manufacturing paradigm a reality
Download or read book The Essentials of the New Workplace written by David Holman and published by John Wiley & Sons. This book was released on 2005-05-05 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The original hardback edition of The New Workplace examined modern business terms such as total quality management, just-in-time production, e-business, lean manufacturing and teleworking. It explored what these terms really mean and what effect they have in practice - especially their impact on productivity and performance and their social and psychological consequences. This paperback is a shorter, revised version of the original book. It will focus on working practices, especially technology orientated ones, which are the most relevant and innovative for consultants.
Download or read book Management written by and published by . This book was released on 1989 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1987 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contemporary Employment Relations written by Steve Williams and published by Oxford University Press, USA. This book was released on 2010 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for undergraduate and postgraduate students in the areas of industrial and employment relations, personnel and human resource management, this work offers an original, accessible, and critical approach to understanding employment relations.
Download or read book Management A Bibliography for NASA Managers written by and published by . This book was released on 1989 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Safety Governance written by Marion Dreyer and published by Springer Science & Business Media. This book was released on 2009-04-28 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: working mechanisms and to develop the overall governance framework in which we operate. Catherine Geslain-Lanéelle Executive Director European Food Safety Authority (EFSA) Parma, March 2008 Acknowledgements This book and the General Framework for the Precautionary and Inclusive Governance of Food Safety that it presents and critically discusses have grown out of research undertaken within one of the subprojects (work package 5) of the research project SAFE FOODS, ‘Promoting Food Safety through a New Integrated Risk Analysis Approach for Foods’. The Integrated Project SAFE FOODS has been funded by the European Commission under the 6th Framework Programme (April 2004 to June 2008) and coordinated by Dr H.A. Kuiper and Dr H.J.P. Marvin of RIKILT-Institute of Food Safety at the University of Wageningen in the Netherlands. Subproject 5 of SAFE FOODS has dealt with institutional aspects of food safety governance with a focus on ways (procedural and structural mec- nisms) to improve the implementation of precaution, participation and a politi- science interface, and has been coordinated by the editors of this book. The General Framework and this book have been a collaborative effort of subproject 5 in which all contributors to the first part of this book were involved. We have very much appreciated this exceptionally fruitful cooperation. It has always been both greatly intellectually inspiring (with many intensive, focused discussions) and very pleasant (highly cooperative and reliable).
