Download or read book Propylene Glycol from Chlorine and Propylene Cost Analysis Propylene Glycol E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Propylene Glycol production from chlorine and chemical grade (CG) propylene. The process examined is a typical hydration process. In this process, dichloropropane is generated as by-product. This report was developed based essentially on the following reference(s): Keywords: Unsaturated Polyester, UPR, Propene, Chlorohydrin

Download or read book Propylene Glycol from Propylene Oxide Cost Analysis Propylene Glycol E31A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Propylene Glycol production from propylene oxide. The process examined is a typical hydration process, in which propylene oxide is hydrolyzed to Propylene Glycol. The hydration reaction output is purified, yielding Propylene Glycol as the main product and dipropylene glycol as by-product. This report was developed based essentially on the following reference(s): (1) "Propanediols," Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Glycols, Propylene Glycols," Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: PO, Epoxypropane, Propane-1,2-diol

Download or read book Propylene Glycol Production from Glycerol Cost Analysis Propylene Glycol E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Propylene Glycol production from glycerol using a vapor-phase process. The process examined is similar to Davy Technologies process. In this process, technical grade glycerol (99.5 wt% glycerol content) is used as feedstock and ethylene glycol is generated as by-product. This report was developed based essentially on the following reference(s): Keywords: Glycerin, Davy Process Technology, DPT, Propane-1,2-diol, Hydrogenolysis, Cargill, Ashland

Download or read book Epichlorohydrin Production from Propylene Cost Analysis ECH E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Epichlorohydrin production from propylene and chlorine. The process examined is a typical dehydrochlorination process. This process involves three main steps: (i) chlorination of propylene to allyl chloride; (ii) addition of hypochlorous acid to the allyl chloride formed yielding glycerol dichlorohydrins, and (iii) treatment of the glycerol – dichlorohydrin mixture with a base, yielding Epichlorohydrin product. 99.9 wt.% Epichlorohydrin is obtained. This report was developed based essentially on the following reference(s): Rowe, C.E., 'Chlorohydrins', Chemical Processing Handbook, 1993 Keywords: 3-Chloropropene, Hypochlorous Acid, HOCl, Chlorination

Download or read book Propylene Glycol Production from Glycerol Cost Analysis Propylene Glycol E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Propylene Glycol production from glycerol using a liquid-phase process. The process examined is similar to Suppes process. In this process, technical grade glycerol (99.5 wt% glycerol content) is used as feedstock and ethylene glycol is generated as by-product. This report was developed based essentially on the following reference(s): Keywords: Glycerin, Senergy Chemical, Propane-1,2-diol, Hydrogenolysis

Download or read book Propylene Production Cost Analysis Overview Propylene AA01 written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a free full sample report offered by Intratec Solutions to demonstrate, in advance, the type of information you will get when you buy one of our reports, offering the same standard and structure (types of graphs, tables and descriptions) that you will find in all of our Cost Analysis Overview reports. This report presents alternatives for producing PG Propylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of PG Propylene production through the following pathways: * Pathway 1: Propylene Production from Light Naphtha * Pathway 2: Propylene Production from Ethylene and Butenes * Pathway 3: Propylene Production from Propane (with Hydrogen Generation) Pathway 1 corresponds to a steam cracker for Propylene production (ethylene as co-product). In Pathway 2, Propylene is produced via metathesis reaction of ethylene with 2-butene (present in raffinate-2 feedstock). In Pathway 3, propane is dehydrogenated to Propylene with hydrogen generated being valued as fuel. The analysis presented in this report includes: * A comparison of the economic potential of the pathways listed above in several countries, comprising: - Comparative analysis of capital costs - Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway - An overview of each production pathway, including: - Raw material(s) consumption figures and product(s) generated - Related technology licensors and block flow diagram of representative industrial processes Keywords: Propene, Ethene, Steam Cracking, PDH, Propane Dehydrogenation, Olefins Conversion Technology, OCT

Download or read book Propylene Production from Ethylene Cost Analysis Propylene E21A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from ethylene using two integrated processes: dimerization and metathesis. The processes examined are similar to CB&I Lummus technologies: Ethylene Dimerization Technology and Olefins Conversion Technology (OCT). In these processes, ethylene is first dimerized into butenes, and then, Propylene is produced through a metathesis reaction of 2-butene and ethylene. This report was developed based essentially on the following reference(s): (1) US Patent 8440874, issued to Lummus Technology and BASF in 2013 (2) US Patent 4242531, issued to Phillips Petroleum Company in 1980 Keywords: PG Propylene, Olefins Dimerization, Olefins Disproportionation, Lummus OCT, Olefins Metathesis, Phillips Triolefin, Propene, Ethene, On-Purpose Propylene Production

Download or read book Sodium Polyacrylate Production Process Cost Analysis Sodium Polyacrylate E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Sodium Polyacrylate production from glacial acrylic acid and sodium hydroxide. In this process, acrylic acid is partially neutralized by sodium hydroxide, yielding a solution of sodium acrylate monomers, which is subsequently polymerized to Sodium Polyacrylate. This report was developed based essentially on the following reference(s): (1) US Patent 6727345, issued to Nippon Shokubai in 2004 (2) US Patent 8742026, issued to BASF in 2014 Keywords: Superabsorbent Polymer, SAP, NaOH, Slush Powder, Saponification

Download or read book Ethylene Glycol Production from Carbon Dioxide Cost Analysis MEG E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from carbon dioxide (CO2) using an electrochemical process. The process examined is similar to Liquid Light process. In this process, CO2 is electrochemically converted to oxalic acid, which is then hydrogenated to MEG. This report was developed based essentially on the following reference(s): US Patents 20140221684 and 20140206895, both issued to Liquid Light in 2014 Keywords: Ethylene Glycol, Fiber Grade, Hydrogen Bromide, Bromine, 1,2-Ethanediol

Download or read book Chemical Reaction Engineering written by Octave Levenspiel and published by John Wiley & Sons. This book was released on 1998-09-01 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical reaction engineering is concerned with the exploitation of chemical reactions on a commercial scale. It's goal is the successful design and operation of chemical reactors. This text emphasizes qualitative arguments, simple design methods, graphical procedures, and frequent comparison of capabilities of the major reactor types. Simple ideas are treated first, and are then extended to the more complex.

Download or read book Haddad and Winchester s Clinical Management of Poisoning and Drug Overdose written by Michael W. Shannon and published by Saunders. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is a reference for information related to the clinical management of children and adults whose health has been effected or potentially effected by toxic agents, including drugs, environmental threats, and natural toxins.

Download or read book Cosmeceuticals and Active Cosmetics written by Raja K Sivamani and published by CRC Press. This book was released on 2015-09-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cosmeceuticals and Active Cosmetics discusses the science of nearly two dozen cosmeceuticals used today. This third edition provides ample evidence on specific cosmeceutical substances, their classes of use, skin conditions for which they are used, and points of interest arising from other considerations, such as toxicology and manufacturing. The book discusses both cosmetic and therapeutic uses of cosmeceuticals for various conditions including rosacea, dry skin, alopecia, eczema, seborrheic dermatitis, purpura, and vitiligo. Active ingredients in the following products are discussed: caffeine, curcumin, green tea, Rhodiola rosea, milk thistle, and more. Also covered are topical peptides and proteins, amino acids and derivatives, antioxidants, vitamins E and C, niacinamide, botanical extracts, and biomarine actives. Providing ample scientific references, this book is an excellent guide to understanding the science behind the use of cosmeceuticals to treat a variety of dermatological conditions.

Download or read book Targeted Drug Delivery Concepts and Design written by Padma V. Devarajan and published by Springer. This book was released on 2014-12-08 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative volume explores the fundamental concepts and numerous applications of targeted delivery of drugs to the body. This compilation has been divided into eight sections comprised of the basic principles of drug targeting, disease and organ/organelle-based targeting, passive and active targeting strategies, and various advanced drug delivery tools such as functionalized lipidic, polymeric and inorganic nanocarriers. Together, the twenty-three chapters cover a wide range of topics in the field, including tumor and hepatic targeting, polymer-drug conjugates, nanoemulsion, physical and biophysical characteristics of nanoparticles, and in vivo imaging techniques, among others. The book also examines advanced characterization techniques, regulatory hurdles and toxicity-related issues that are key features for successful commercialization of targeted drug delivery system products. Targeted Drug Delivery is a comprehensive reference guide for drug delivery researchers, both beginners and those already working in the field.

Download or read book Plastic Waste and Recycling written by Trevor M. Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Chemical Reaction Engineering written by Martin Schmal and published by CRC Press. This book was released on 2014-04-04 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reaction Engineering: Essentials, Exercises and Examples presents the essentials of kinetics, reactor design and chemical reaction engineering for undergraduate students. Concise and didactic in its approach, it features over 70 resolved examples and many exercises.The work is organized in two parts: in the first part kinetics is presented

Download or read book Keratin as a Protein Biopolymer written by Swati Sharma and published by Springer. This book was released on 2018-11-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information about the sources, structure, and properties of keratin as well as its applications. The extraction from different biomass sources (e.g. feathers, hairs, nails, horn, hoof, and claws) as well as the characterization methods of these extracted materials are explained. The development of bioproducts from keratins is challenging and limited since they are neither soluble in polar solvents nor in non-polar solvents. Therefore, the utilization of different microorganisms for the degradation of keratin is also discussed. The main aim of this book is to highlight the unique features of keratin and to update readers with the possible prospects to develop various value-added products from keratins. The book is highly interesting to researchers working in industry and academia on bioproducts, tissue engineering, biocomposites, biofilm, and biofibers.

Download or read book Biodiesel Science and Technology written by Jan C.J. Bart and published by Elsevier. This book was released on 2010-02-19 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel production is a rapidly advancing field worldwide, with biodiesel fuel increasingly being used in compression ignition (diesel) engines. Biodiesel has been extensively studied and utilised in developed countries, and it is increasingly being introduced in developing countries, especially in regions with high potential for sustainable biodiesel production. Initial sections systematically review feedstock resources and vegetable oil formulations, including the economics of vegetable oil conversion to diesel fuel, with additional coverage of emerging energy crops for biodiesel production. Further sections review the transesterification process, including chemical (catalysis) and biochemical (biocatalysis) processes, with extended coverage of industrial process technology and control methods, and standards for biodiesel fuel quality assurance. Final chapters cover the sustainability, performance and environmental issues of biodiesel production, as well as routes to improve glycerol by-product usage and the development of next-generation products. Biodiesel science and technology: From soil to oil provides a comprehensive reference to fuel engineers, researchers and academics on the technological developments involved in improving biodiesel quality and production capacity that are crucial to the future of the industry. Evaluates biodiesel as a renewable energy source and documents global biodiesel development The outlook for biodiesel science and technology is presented exploring the challenges faced by the global diesel industry Reviews feedstock resources and vegetable oil formation including emerging crops and the agronomic potential of underexploited oil crops