Download or read book Property and Energy Conversion Technology of Solid Composite Sorbents written by Liwei Wang and published by Springer Nature. This book was released on 2021-04-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid chemisorption technology is an effective form of energy conversion for recovering low-grade thermal energy, but limited thermal conductivity and agglomeration phenomena greatly limit its performance. Over the past 20 years, researchers have explored the use of thermal conductive porous matrix to improve heat and mass transfer performance. Their efforts have yielded composite sorption technology, which is now extensively being used in refrigeration, heat pumps, energy storage, and de-NOx applications. This book reviews the latest technological advances regarding composite solid sorbents. Various development methods are introduced and compared, kinetic models are presented, and different cycles are analyzed. Given its scope, the book will benefit experts involved in developing novel materials and cycles for energy conversion, as well as engineers working to develop effective commercialized energy conversion systems based on solid sorption technology
Download or read book Property and Energy Conversion Technilogy of Solid Composite Sorbents written by Liwei Wang (Professor) and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technology Development for Adsorptive Heat Energy Converters Emerging Research and Opportunities written by Sukhyy, Kostyantyn M. and published by IGI Global. This book was released on 2020-10-23 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy saving and emission reduction are two of the greatest challenges facing the world today. Heat energy storage can save fuel and effectively use renewable sources. Heat energy storage is decisive for many energy saving measures and promises a reliance on non-traditional renewable energy sources. However, most recent research focused on material selection is scattered, disembodied, and sometimes contradictory. Technology Development for Adsorptive Heat Energy Converters: Emerging Research and Opportunities is an essential publication that offers a cohesive examination of methods of energy storage and conversion. Highlighting a broad range of topics including composite materials, operating principles, and structural characteristics, this book is ideally designed for developers, policymakers, researchers, academicians, students, and engineers in the fields of materials engineering, renewable energy, and environmental engineering.
Download or read book Nanocomposite Sorbents for Multiple Applications written by Yu. I. Aristov and published by CRC Press. This book was released on 2020-03-02 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first ever comprehensive survey of a new family of nanocomposite sorbents “salt in porous matrix” (CSPMs). These composites have recently been developed for selective sorption of water, alcohols, ammonia, and carbon dioxide. They owe their origin to the catchy idea of target-oriented tailoring of materials with predetermined adsorption properties harmonized with a particular adsorption process. The book develops the concept of target-oriented synthesis and suggests tools for tailoring new adsorbent materials adapted to multiple practical applications. It describes properties of approximately 50 new CSPMs of water, alcohols, ammonia, and carbon dioxide, including the data obtained in the author’s laboratory and literature available by the end of 2018. These data can be used for engineering calculations and analysis of practical applications. The book also discusses potential applications of these sorbents for storage and transformation of low-temperature heat, gas drying, maintenance of relative humidity in museums, and regeneration of heat and moisture in ventilation systems.
Download or read book Negative Emissions Technologies for Climate Change Mitigation written by Steve A. Rackley and published by Elsevier. This book was released on 2023-07-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Negative Emissions Technologies for Climate Change Mitigation provides a comprehensive introduction to the full range of technologies that are being researched, developed and deployed in order to transition from our current energy system, dominated by fossil fuels, to a negative-carbon emissions system. After an introduction to the challenge of climate change, the technical fundamentals of natural and engineered carbon dioxide removal and storage processes and technologies are described. Each NET is then discussed in detail, including the key elements of the technology, enablers and constraints, governance issues, and global potential and cost estimates. This book offers a complete overview of the field, thus enabling the community to gain a full appreciation of NETs without the need to seek out and refer to a multitude of sources. Covers the full spectrum of technologies to underpin the transition to a negative emissions energy system, from technical fundamentals to the current state of deployment and R&D Critically evaluates each technology, highlighting advantages, limitations, and the potential for large scale environmental applications Combines natural science and environmental science perspectives with the practical use of state-of-the-art technologies for sustainability
Download or read book Solar Cooling Technologies written by Sotirios Karellas and published by CRC Press. This book was released on 2018-10-03 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Cooling Technologies presents a detailed study of the potential technologies for coupling solar energy and cooling systems. Unifies all the various power based solar techniques into one book, investigates tri-generation schemes for maximization of cooling efficiency, especially for small scale applications and offers direct comparison of all possible technologies of solar cooling Includes detailed numerical investigations for potential cooling applications
Download or read book Fiscal Year 1986 Department of Energy Authorization fossil Energy written by United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Development and Applications and published by . This book was released on 1985 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Congressional Budget Request written by United States. Department of Energy and published by . This book was released on 1985 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Looping Systems for Fossil Energy Conversions written by Liang-Shih Fan and published by John Wiley & Sons. This book was released on 2011-02-14 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the current carbonaceous fuel conversion technologies based on chemical looping concepts in the context of traditional or conventional technologies. The key features of the chemical looping processes, their ability to generate a sequestration-ready CO2 stream, are thoroughly discussed. Chapter 2 is devoted entirely to the performance of particles in chemical looping technology and covers the subjects of solid particle design, synthesis, properties, and reactive characteristics. The looping processes can be applied for combustion and/or gasification of carbon-based material such as coal, natural gas, petroleum coke, and biomass directly or indirectly for steam, syngas, hydrogen, chemicals, electricity, and liquid fuels production. Details of the energy conversion efficiency and the economics of these looping processes for combustion and gasification applications in contrast to those of the conventional processes are given in Chapters 3, 4, and 5.Finally, Chapter 6 presents additional chemical looping applications that are potentially beneficial, including those for H2 storage and onboard H2 production, CO2 capture in combustion flue gas, power generation using fuel cell, steam-methane reforming, tar sand digestion, and chemicals and liquid fuel production. A CD is appended to this book that contains the chemical looping simulation files and the simulation results based on the ASPEN Plus software for such reactors as gasifier, reducer, oxidizer and combustor, and for such processes as conventional gasification processes, Syngas Chemical Looping Process, Calcium Looping Process, and Carbonation-Calcination Reaction (CCR) Process. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Download or read book Department of the Interior and Related Agencies Appropriations for 1986 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1986 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic and Mineral Fibers Their Composites and Applications written by Sanjay Mavinkere Rangappa and published by Elsevier. This book was released on 2024-08-09 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic and Mineral Fibers, Their Composites and Applications reviews recent advances and technological developments in this important research field. The book provides an up-to-date record of significant research findings and observations along with an update on current and future potential applications. The book provides vital information on recent advancements, modern processing technologies, manufacturing, and applications and summarizes lifecycle and performance parameters for these types of composites. This book will be a valuable reference resource for academic and industrial researchers and materials scientists and engineers working in the development of polymer composite materials reinforced with synthetic and mineral fibers for applications in aerospace, medical, defense, automotive and construction sectors. Covers both synthetic and mineral fibers, their composites, and applications Highlights recent advances in mineral fiber- reinforced polymer composites, modern processing methods, and functionalization Provides updates on hybrid (combination of both synthetic and mineral fiber) composite technologies Features applications in aerospace, medical, defense and the construction industries
Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1981 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Energy written by Yatish T. Shah and published by CRC Press. This book was released on 2018-01-12 with total page 1574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book details sources of thermal energy, methods of capture, and applications. It describes the basics of thermal energy, including measuring thermal energy, laws of thermodynamics that govern its use and transformation, modes of thermal energy, conventional processes, devices and materials, and the methods by which it is transferred. It covers 8 sources of thermal energy: combustion, fusion (solar) fission (nuclear), geothermal, microwave, plasma, waste heat, and thermal energy storage. In each case, the methods of production and capture and its uses are described in detail. It also discusses novel processes and devices used to improve transfer and transformation processes.
Download or read book Innovative Materials in Advanced Energy Technologies written by P. Vincenzini and published by Techna Group. This book was released on 1999 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Phytochemistry Textile and Renewable Energy Research for Industrial Growth written by Charles Nzila and published by CRC Press. This book was released on 2022-04-07 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Phytochemistry, Textile, & Renewable Energy Technologies for Sustainable Development (ICPTRE 2020) was hosted by the World bank funded Africa Centre of Excellence in Phytochemicals, Textile and Renewable Energy (ACEII-PTRE) based at Moi University in conjunction with Donghua University, China and the Sino–Africa International Symposium on Textiles and Apparel (SAISTA). The theme of the conference was Advancing Science, Technology and Innovation for Industrial Growth. The research relationships between universities and industry have enabled the two entities to flourish and, in the past, have been credited for accelerated sustainable development and uplifting of millions out poverty. ICPTRE 2020 therefore provided a platform for academic researchers drawn from across the world to meet key industry professionals and actively share knowledge while advancing the role of research in industrial development, particularly, in the developing nations. The conference also provided exhibitors with an opportunity to interact with professionals and showcase their business, products, technologies and equipment. During the course of the conference, industrial exhibitions, research papers and presentations in the fields of phytochemistry, textiles, renewable energy, industry, science, technology, innovations and much more were presented.
Download or read book Nanomaterials for Carbon Dioxide Capture and Conversion Technologies written by Shaukat Ali Mazari and published by Elsevier. This book was released on 2022-10-04 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Carbon Dioxide Capture and Conversion Technologies focuses on the applications of nanomaterials for CO2 capture and conversion. The book highlights the need for CO2 mitigation, followed by the basic principles for CO2 capture and conversion, using different nanomaterials, while also discussing and highlighting challenges and perspectives. Abundant CO2 emissions from industries and the transportation sector are a threat to the planet due to overwhelming concerns regarding CO2-induced climate change. Nanomaterials are being widely investigated for CO2 capture and conversion processes. Nano absorbents, adsorbents and nanomembranes for CO2 capture, nano catalysts for catalytic CO2 conversion, and chemical fixation of CO2 are some of the broader applications of nanomaterials for CO2 mitigation. Helps readers understand the basic mechanisms and theories behind CO2 capture and conversion using nanomaterials Provides information on the range of nanomaterials types used in CO2 capture and storage systems Assesses the major challenges for integrating nanotechnology into carbon dioxide capture and storage systems at an industrial scale
