Download or read book Properties and Comparison of Multistage Interconnection Networks for SIMD Machines written by Mary-Diane Palmer Leland and published by . This book was released on 1983 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Uniform Representation of Single and Multi Stage Interconnection Networks Used in SIMD Machines written by D. K. Pradhan and published by . This book was released on 1980 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: A switching theoretic framework for the study of interconnection networks is developed. An equivalence relationship between networks id defined. Single stage and multi-stage networks that are particularly useful for single instructions multiple data stream (SIMD) machines are studied. It is shown that the networks form two distinct equivalence classes under this definition of equivalence relationship. It is shown that any multi-stage network can be easily modified to realize the permutations that are admissable by any other network which is equivalent to it. (Author).
Download or read book Multistage Interconnection Network Design for Engineers written by Shilpa Gupta and published by Bentham Science Publishers. This book was released on 2023-12-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a quick and easy understanding of multistage interconnection networks (MINs) for engineers. The book contents focus on the design, performance metrics, and evaluation of these networks which are crucial in modern computer architecture. The contents equip engineering students, apprentices and professionals with in-depth knowledge and analysis of MINS, enabling them to build complex computer architectures for efficient data communications and cost effective solutions for circuit design. The book starts with an introduction to MINS and subsequently progresses to the evaluation of a range of MINS (SEN, Gamma-Minus, FTSN, FTGN, SEGIN). Key highlights of the book include: · Easy to understand notes on design, reliability and fault tolerance · Covers a wide range of MIN types with notes on design variants · Supplementary information aiding comprehension of the main content. · A curated list of references for further exploration and deeper understanding.
Download or read book Interconnection Networks for High performance Parallel Computers written by Isaac D. Scherson and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Multistage Interconnection Networks written by Abdou S. Youssef and published by . This book was released on 1988 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 1986 International Conference on Parallel Processing written by and published by . This book was released on 1986 with total page 1078 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Comparison of Multistage Interconnection Networks written by International Business Machines Corporation. Research Division and published by . This book was released on 1991 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interconnection Networks for Large scale Parallel Processing written by Howard Jay Siegel and published by McGraw-Hill Companies. This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel computer systems are being used to forecast the weather, make maps, simulate chemical reactions, control air traffic, guide missiles, provide robots with vision, and manage ballistic missile defense. A major problem in designing large-scale parallel systems is the construction of an interconnection network to provide interprocessor communications. This book presents the theoretical basis and a number of case studies that demonstrate how this work is done. This revision includes the most recent research in the field.
Download or read book A Comparison of Single stage and Multistage Multiprocessor Interconnection Networks in the Presence of a Hot Spot written by Kevin Greg Gunter and published by . This book was released on 1989 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interconnection Networks for Multiprocessors and Multicomputers written by Anujan Varma and published by . This book was released on 1994 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Systems Organization -- Computer-Communication Networks.
Download or read book Comparison of Error correcting Techniques for Multistage Interconnection Networks written by International Business Machines Corporation. Research Division and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparative Analysis of Multistage Interconnection Networks written by James T. Blake and published by . This book was released on 1987 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis provides a comparative analysis of various interconnection networks and multiprocessor systems. The Shuffle-Exchange multistage interconnection Network (SEN) and its variants are evaluated and compared. Comparison is based on reliability, composite measures of performance and reliability, and cost. Closed-form expressions for the computation of the available bandwidth for multiprocessor systems with a capability of graceful degradation are developed. The time dependent reliability of the SEN and three fault-tolerant schemes aimed at improving system reliability are examined. These schemes are the redundant network, the extra stage network, and the network augmented with intrastage links. Exact closed-form expressions for the time-dependent reliability of the N x N Shuffle-Exchange Network (SEN), the 8 x 8 and 16 x 16 SEN with an additional stage (SEN+), and the 4 X 4 and 8 X 8 Augmented SEN (ASEN) are derived. Upper and lower bounds useful for the analysis of larger SEN+ and ASEN networks are derived. Performability analysis of a complete multiprocessor system is conducted.
Download or read book Interconnection Networks written by Jose Duato and published by Morgan Kaufmann. This book was released on 2003 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword -- Foreword to the First Printing -- Preface -- Chapter 1 -- Introduction -- Chapter 2 -- Message Switching Layer -- Chapter 3 -- Deadlock, Livelock, and Starvation -- Chapter 4 -- Routing Algorithms -- Chapter 5 -- CollectiveCommunicationSupport -- Chapter 6 -- Fault-Tolerant Routing -- Chapter 7 -- Network Architectures -- Chapter 8 -- Messaging Layer Software -- Chapter 9 -- Performance Evaluation -- Appendix A -- Formal Definitions for Deadlock Avoidance -- Appendix B -- Acronyms -- References -- Index.
Download or read book The Modeling Simulation and Comparison of Interconnection Networks for Parallel Processing written by Richard A. Raines and published by . This book was released on 1987 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis extends existing modeling, analysis and comparison of interconnection networks for parallel processing systems. Simulation models are developed for the multistage cube network, the single stage cube network (hypercube), and the Illiac IV mesh-type network. They are then used to provide a comparison of three classes of interconnection networks which, until now, has not been performed. These models implemented using a commercially packaged simulation language provide for compact source code and ease of readability. The networks are modeled under a common set of operating assumptions and system environment. This allows for accurate comparisons of average network packet delays an memory requirements necessary to physically implement the chosen network at a given network operating load. It is concluded that, for the network sizes and operating conditions established, the multistage cube network performs better at a lower hardware cost than do the single stage cube and mesh networks. As a result, the designer of a parallel processing system is given additional insight for choosing an interconnection network which best suits the application needs. Keywords: Theses; Computer architecture; Crossbar switches; Circuit switching.
Download or read book Design and Performance of Multistage Interconnection Networks written by Rinkle Aggarwal and published by LAP Lambert Academic Publishing. This book was released on 2012-05 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the existing research literature a large number of regular MINs with their performance characteristics are available. However, there is relatively smaller number of irregular MINs. The present research work is an endeavour to study the importance and design of fault-tolerant MINs. It is with the use of various techniques based on high degree of parallelism, self-routing and modularity that three new dynamic irregular MINs have been proposed in order to improve their fault-tolerance, performance and reliability. The irregular networks have been considered because of their advantage of the shorter path length in comparison to their regular counterparts. The irregular dynamic MIN supports many redundant paths in the event of faults in order to dynamically reroute the data through a fault-free path and passes most of the permutations even under faults while improving the Mean-time to failure (MTTF).
Download or read book Interconnection Networks For Parallel Processing written by J. Sengupta and published by Deep and Deep Publications. This book was released on 2005 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Performance and Reliability written by Giuseppe G. Iazeolla and published by North Holland. This book was released on 1988 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MCPR Workshop is an interdisciplinary computer science/mathematics event. It takes place once very fourth year and is aimed at evaluating the latest progress in modeling techniques in the area of performance and reliability engineering of computer/communication systems. Like its predecessor, the workshop from which these papers originate aimed at stimulating the exchange of ideas and experience among scientists active in mathematics research relevant to performance and reliability aspects of the design of computer and communication systems. The spirit of these exchanges and the main issues at stake are defined by an unceasing and difficult quest for models and techniques which are in the interests of mathematical tractability and accuracy, and at the same time allow for enough realism so as to yield results which are pertinent to system designers. This was reflected in the present program, which proposed a balanced and varied mixture of approximation techniques, of simulation methods and of analytical results on queueing, matrix and Petri net models.
