Download or read book Progressing Cavity Pumps written by Christian Wittrisch and published by TECHNIP OPHRYS EDITIONS. This book was released on 2012 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progressing cavity pump (PCP), invented by RenÃ(c) Moineau, is a great innovation for the whole industry, particularly in petroleum production. The aim of this new edition is to provide clear related and condensed information about the principles of the progressing cavity pump, including the use of recent material technologies to manufacture pump stators, with advanced elastomers and now with metals. The same applies to the drive rods and driving head, particularly with permanent magnet motors and advanced control and well monitoring, with downhole and surface sensors to control and monitor the pumping system. Software is used to select the best pump for the well candidate. All these new technologies mean that well production can be increased and the PCP's operating life can be extended with reduced operating costs. This book is intended to provide the criteria for selecting a progressing cavity pump and the operational conditions for its implementation by technicians and field development managers.

Download or read book The Progressing Cavity Pump Handbook written by James M. Revard and published by Pennwell Corporation. This book was released on 1995 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work serves to assist the oil and gas producer in achieving successful installation and operation of the progressing cavity pump and, at the same time, assure the continued expansion of the PC pump marketplace by educating the reader not to make some of the common mistakes made by manufacturers, pump suppliers and producers.

Download or read book Progressing Cavity Pumps written by Henri Cholet and published by Editions TECHNIP. This book was released on 1997 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progressing cavity pump is a recent innovation in petroleum production. It rapidly gained an important place in the production of heavy oils containing gas. It has now been confirmed as very efficient for the production of large flow rates of light and abrasive oils. Driven by rod strings from the surface, it is a simple, rugged and cheap equipment. The aim of this book is to provide clear and condensed information related to the principles, qualities and performances of this system. This book is intended to provide the choice criteria of a progressing cavity pump and the operational conditions for its implementation by technicians and field development managers.Contents: 1. Principle and general description of the progressing cavity pump. 2. PCP characteristics. 3. Selection of a PCP. 4. Presence of gas at the pump inlet. 5. Driving from surface of PCP. 6. Installation, operation and maintenance of PCP. 7. An economical completion with the insert pump. 8. The electrical submersible PCP. Bibliography. Index.

Download or read book Artificial Lift Methods written by Tan Nguyen and published by Springer Nature. This book was released on 2020-03-04 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the major artificial lift methods that can be applied to hydrocarbon reservoirs with declining pressure. These include: the sucker rod pump, gas lift, electrical submersible pump, progressive cavity pump, and plunger lift. The design and applications, as well as troubleshooting, are discussed for each method, and examples, exercises and design projects are provided in order to support the concepts discussed in each chapter. The problems associated with oil recovery in horizontal wells are also explored, and the author proposes solutions to address the various extraction challenges that these wells present. The book represents a timely response to the difficulties associated with unconventional oil sources and declining wells, offering a valuable resource for students of petroleum engineering, as well as hydrocarbon recovery researchers and practicing engineers in the petroleum industry.

Download or read book Pump Characteristics and Applications Second Edition written by Michael Volk and published by CRC Press. This book was released on 2005-04-07 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hands-on reference offers a practical introduction to pumps and provides the tools necessary to select, size, operate, and maintain pumps properly. It highlights the interrelatedness of pump engineering from system and piping design to installation and startup. This updated second edition expands on many subjects introduced in the first edition and also provides new in-depth discussion of pump couplings, o-rings, motors, variable frequency drives, pump life-cycle cost, corrosion, and pump minimum flow. Written by an acclaimed expert in the field, Pump Characteristics and Applications, Second Edition is an invaluable day-to-day reference for mechanical, civil, chemical, industrial, design, plant, project, and systems engineers; engineering supervisors; maintenance technicians; and plant operators. It is also an excellent text for upper-level undergraduate and graduate students in departments of mechanical engineering, mechanical engineering technology, or engineering technology. About the Author Michael W. Volk, P.E., is President of Volk & Associates, Inc., Oakland, California (www.volkassociates.com), a consulting company specializing in pumps and pump systems. Volk's services include pump training seminars; pump equipment evaluation, troubleshooting, and field testing; expert witness for pump litigation; witnessing of pump shop tests; pump market research; and acquisition and divestiture consultation and brokerage. A member of the American Society of Mechanical Engineers (ASME), and a registered professional engineer, Volk received the B.S. degree (1973) in mechanical engineering from the University of Illinois, Urbana, and the M.S. degree (1976) in mechanical engineering and the M.S. degree (1980) in management science from the University of Southern California, Los Angeles.

Download or read book Centrifugal Rotary Pumps written by Lev Nelik and published by CRC Press. This book was released on 1999-03-18 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal and Rotary Pumps offers both professionals and students a concise reference detailing the design, performance, and principles of operation of the different pumps types defined by the Hydraulic Institute. From historical background to the latest trends and technological developments, the author focuses on information with real-world prac

Download or read book Handbook of Pumps and Pumping written by Brian Nesbitt and published by Elsevier. This book was released on 2006-10-18 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an experienced engineer, this book contains practical information on all aspects of pumps including classifications, materials, seals, installation, commissioning and maintenance. In addition you will find essential information on units, manufacturers and suppliers worldwide, providing a unique reference for your desk, R&D lab, maintenance shop or library.* Includes maintenance techniques, helping you get the optimal performance out of your pump and reducing maintenance costs * Will help you to understand seals, couplings and ancillary equipment, ensuring systems are set up properly to save time and money * Provides useful contacts for manufacturers and suppliers who specialise in pumps, pumping and ancillary equipment

Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.

Download or read book Gulf Pump Guides Progressing Cavity Pumps Downhole Pumps and Mudmotors written by Lev Nelik and published by Elsevier. This book was released on 2013-11-25 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the world's foremost authorities on pumps, this first volume in Gulf Publishing Company's Gulf Pump Guides series covers the design, application and troubleshooting for progressing cavity pumps, downhole pumps and mudmotors. There is no other volume offering a more comprehensive, easy-to-understand and hands-on coverage of these types of pumps. As they become more and more widely used in the petrochemical industry and other industries, knowledge of their design and application will become increasingly more important for the engineer.

Download or read book Gas Well Deliquification written by James F. Lea Jr. and published by Gulf Professional Publishing. This book was released on 2011-08-30 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid loading can reduce production and shorten the lifecycle of a well costing a company millions in revenue. A handy guide on the latest techniques, equipment, and chemicals used in de-watering gas wells, Gas Well Deliquification, 2nd Edition continues to be the engineer's choice for recognizing and minimizing the effects of liquid loading. The 2nd Edition serves as a guide discussing the most frequently used methods and tools used to diagnose liquid loading problems and reduce the detrimental effects of liquid loading on gas production. With new extensive chapters on Coal Bed Methane and Production this is the essential reference for operating engineers, reservoir engineers, consulting engineers and service companies who supply gas well equipment. It provides managers with a comprehensive look into the methods of successful Production Automation as well as tools for the profitable use, production and supervision of coal bed gases. - Turnkey solutions for the problems of liquid loading interference - Based on decades of practical, easy to use methods of de-watering gas wells - Expands on the 1st edition's useful reference with new methods for utilizing Production Automation and managing Coal Bed Methane

Download or read book Surface Production Operations Volume IV Pumps and Compressors written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2018-11-27 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over thirty years, the Surface Production Operations Series has taken the guess work out of the design, selection, installation, operation, testing, and troubleshooting of surface production equipment. The fourth volume in this series, Pumps and Compressors is directed to both entry-level personnel and practicing professionals looking for an up-to-date reference book on managing, evaluating, sizing, selecting, installing, operating and maintaining pump and compressor systems. Packed with examples drawn from years of design and field experience, this reference features many charts, tables, equations, diagrams, and photographs to illustrate the basic applications including pump hydraulics, centrifugal and reciprocating compressor applications, compressor performance maps, pump performance curves, pump and compressor testing and installation, and many more critical topics. Packed with practical solutions Surface Production Operations: Pumps and Compressors delivers an essential design and specification reference for today's engineers. - Covers application and performance considerations for all types of pumps and compressors - Delivers hands-on manual for applying mechanical and physical principles to select and design pump and compressor systems, supported by many tables and diagrams - Gives expert advice on how to apply design codes and standards such as API 610, API 674, ANSI B78.1, API 617, API 11P, API RP 14C and the Hydraulic Institute

Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pump Handbook written by Igor J. Karassik and published by McGraw Hill Professional. This book was released on 2007-12-18 with total page 1826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rely on the #1 Guide to Pump Design and Application-- Now Updated with the Latest Technological Breakthroughs Long-established as the leading guide to pump design and application, the Pump Handbook has been fully revised and updated with the latest developments in pump technology. Packed with 1,150 detailed illustrations and written by a team of over 100 internationally renowned pump experts, this vital tool shows you how to select, purchase, install, operate, maintain, and troubleshoot cutting-edge pumps for all types of uses. The Fourth Edition of the Pump Handbook features: State-of-the-art guidance on every aspect of pump theory, design, application, and technology Over 100 internationally renowned contributors SI units used throughout the book New sections on centrifugal pump mechanical performance, flow analysis, bearings, adjustable-speed drives, and application to cryogenic LNG services; completely revised sections on pump theory, mechanical seals, intakes and suction piping, gears, and waterhammer; application to pulp and paper mills Inside This Updated Guide to Pump Technology • Classification and Selection of Pumps • Centrifugal Pumps • Displacement Pumps • Solids Pumping • Pump Sealing • Pump Bearings • Jet Pumps • Materials of Construction • Pump Drivers and Power Transmission • Pump Noise • Pump Systems • Pump Services • Intakes and Suction Piping • Selecting and Purchasing Pumps • Installation, Operation, and Maintenance • Pump Testing • Technical Data

Download or read book Sucker Rod Pumping Handbook written by Gabor Takacs and published by Gulf Professional Publishing. This book was released on 2015-05-02 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sucker-Rod Pumping Handbook presents the latest information on the most common form of production enhancement in today's oil industry, making up roughly two-thirds of the producing oilwell operations in the world. The book begins with an introduction to the main features of sucker rod pumping and an explanation and comparison of lift methods. It goes on to provide the technical and practical knowledge needed to introduce the new and practicing production engineer and operator to the equipment, technology, and applications required to maintain optimum operating conditions. Sucker-Rod Pumping Handbook is a must-have manual that ensures operators understand the design, components, and operation of sucker rod pump systems, learn the functions of the systems, apply the fundamental production engineering theories and calculations, and accomplish maximum system efficiency by avoiding the typical pitfalls that lead to fatigue and failure. - Covers basic equipment, techniques, and codes to follow in a comprehensive and easy-to-understand format - Helps users grasp common handling problems that lead to failures - Provides analysis of sucker rod pump installations, including well testing, dynamometer surveys, and modern interpretation methods - Aids operators in understanding and applying fundamental production theories and calculations of operational parameters

Download or read book Pump User s Handbook written by Heinz P. Bloch and published by The Fairmont Press, Inc.. This book was released on 2004 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simply put, this book explains what exactly needs to be done if a facility wants to progress from being a one, two or three year pump MTBF plant, and wishes to join the leading money-making facilities that today achieve a demonstrated pump MTBF of 8.6 years.

Download or read book Solar Pumping for Water Supply written by ALBERTO. W. KIPRONO IBANEZ LLARIO (ASENATH.) and published by . This book was released on 2020-09-28 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar power for pumping groundwater has a vast potential for improving the sustainability of water supply schemes. However experience also shows that a lack of knowledge, capacity and expertise to design and implement such schemes is holding back their adoption. This book bridges this gap to equip engineers and technicians with the requisite knowledge for design, implementation and operation of sustainable solar powered water schemes.Solar Pumping for Water Supply is a state of the art review of solar water pumping technology combined with practical insights, lessons and best practices drawn from experience. It takes the reader step by step through the different phases that comprise a solar water pumping project, namely: assessment, design, purchase of equipment, installation, operation and management. The book also covers the economics of using solar pumping technology, especially when compared to diesel generators and hand pumps. Finally, the social aspects are included, specifically relating to the operation and management of solar pumping systems and the role that beneficiaries, implementers, government and the private sector might play to ensure long-lasting water supply. The book provides links and references to tools, documents and videos to accompany the content of the different chapters.Essential reading for solar technical practitioners at NGOs, UN agencies, government offices and private sector, including Global and Regional Technical advisors and Field engineers wanting to understand and know how to design water systems using solar power. A basic knowledge in the field of water supply is assumed, but no previous knowledge of solar photovoltaic technology is required.Alberto Ibáñez Llario is a Global Solar and Water Advisor with the International Organization for Migration and has 15 years of experience in water systems and solar PV in various locations around the world.Asenath Kiprono is a solar water pumping expert with 12 years' experience in design and implementation of pumping systems in rural Africa, including solar pumping systems in the private, public and humanitarian sectors.

Download or read book Electrical Submersible Pumps Manual written by Gabor Takacs and published by Gulf Professional Publishing. This book was released on 2017-09-22 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Submersible Pumps Manual: Design, Operations and Maintenance, Second Edition continues to deliver the information needed with updated developments, technology and operational case studies. New content on gas handlers, permanent magnet motors, and newly designed stage geometries are all included. Flowing from basic to intermediate to special applications, particularly for harsh environments, this reference also includes workshop materials and class-style examples for trainers to utilize for the newly hired production engineer. Other updates include novel pump stage designs, high-performance motors and temperature problems and solutions specific for high temperature wells. Effective and reliable when used properly, electrical submersible pumps (ESPs) can be expensive to purchase and maintain. Selecting the correct pump and operating it properly are essential for consistent flow from production wells. Despite this, there is not a dedicated go-to reference to train personnel and engineers. This book keeps engineers and managers involved in ESPs knowledgeable and up-to-date on this advantageous equipment utilized for the oil and gas industry. - Includes updates such as new classroom examples for training and more operational information, including production control - Features a rewritten section on failures and troubleshooting - Covers the latest equipment, developments and maintenance needed - Serves as a useful daily reference for both practicing and newly hired engineers - Explores basic electrical, hydraulics and motors, as well as more advanced equipment specific to special conditions such as production of deviated and high temperature wells