Download or read book Recent Advances in Technology Research and Education written by Dumitru Luca and published by Springer. This book was released on 2017-09-08 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 16th International Conference on Global Research and Education Inter-Academia 2017 hosted by Alexandru Ioan Cuza University of Iași, Romania from 25 to 28 September 2017. It is the third volume in the series, following the editions from 2015 and 2016. Fundamental and applied research in natural sciences have led to crucial developments in the ongoing 4th global industrial revolution, in the course of which information technology has become deeply embedded in industrial management, research and innovation – and just as deeply in education and everyday life. Materials science and nanotechnology, plasma and solid state physics, photonics, electrical and electronic engineering, robotics and metrology, signal processing, e-learning, intelligent and soft computing have long since been central research priorities for the Inter-Academia Community (I-AC) – a body comprising 14 universities and research institutes from Japan and Central/East-European countries that agreed, in 2002, to coordinate their research and education programs so as to better address today’s challenges. The book is intended for use in academic, government, and industrial R&D departments as a reference tool in research and technology education. The 42 peer-reviewed papers were written by more than 119 leading scientists from 14 countries, most of them affiliated to the I-AC.

Download or read book Particle Physics Reference Library written by Stephen Myers and published by Springer Nature. This book was released on 2020-01-01 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third open access volume of the handbook series deals with accelerator physics, design, technology and operations, as well as with beam optics, dynamics and diagnostics. A joint CERN-Springer initiative, the "Particle Physics Reference Library" provides revised and updated contributions based on previously published material in the well-known Landolt-Boernstein series on particle physics, accelerators and detectors (volumes 21A,B1,B2,C), which took stock of the field approximately one decade ago. Central to this new initiative is publication under full open access.

Download or read book Elementary Particles Accelerators and Colliders written by Ugo Amaldi and published by Springer. This book was released on 2013-03-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a historical consideration of the types and evolution of accelerators the physics of particle beams is provided in detail. Topics dealt with comprise linear and nonlinear beam dynamics, collective phenomena in beams, and interactions of beams with the surroundings. The design and principles of synchrotrons, circular and linear colliders, and of linear accelerators are discussed next. Also technological aspects of accelerators (magnets, RF cavities, cryogenics, power supply, vacuum, beam instrumentation, injection and extraction) are reviewed, as well as accelerator operation (parameter control, beam feedback system, orbit correction, luminosity optimization). After introducing the largest accelerators and colliders of their times the application of accelerators and storage rings in industry, medicine, basic science, and energy research is discussed, including also synchrotron radiation sources and spallation sources. Finally, cosmic accelerators and an outlook for the future are given.

Download or read book The Data Science Design Manual written by Steven S. Skiena and published by Springer. This book was released on 2017-07-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging and clearly written textbook/reference provides a must-have introduction to the rapidly emerging interdisciplinary field of data science. It focuses on the principles fundamental to becoming a good data scientist and the key skills needed to build systems for collecting, analyzing, and interpreting data. The Data Science Design Manual is a source of practical insights that highlights what really matters in analyzing data, and provides an intuitive understanding of how these core concepts can be used. The book does not emphasize any particular programming language or suite of data-analysis tools, focusing instead on high-level discussion of important design principles. This easy-to-read text ideally serves the needs of undergraduate and early graduate students embarking on an “Introduction to Data Science” course. It reveals how this discipline sits at the intersection of statistics, computer science, and machine learning, with a distinct heft and character of its own. Practitioners in these and related fields will find this book perfect for self-study as well. Additional learning tools: Contains “War Stories,” offering perspectives on how data science applies in the real world Includes “Homework Problems,” providing a wide range of exercises and projects for self-study Provides a complete set of lecture slides and online video lectures at www.data-manual.com Provides “Take-Home Lessons,” emphasizing the big-picture concepts to learn from each chapter Recommends exciting “Kaggle Challenges” from the online platform Kaggle Highlights “False Starts,” revealing the subtle reasons why certain approaches fail Offers examples taken from the data science television show “The Quant Shop” (www.quant-shop.com)

Download or read book Lasers and Nuclei written by Heinrich Schwoerer and published by Springer Science & Business Media. This book was released on 2006-05-22 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers and Nuclei describes the generation of high-energy-particle radiation with high-intensity lasers and its application to nuclear science. A basic introduction to laser--matter interaction at high fields is complemented by detailed presentations of state of the art laser particle acceleration and elementary laser nuclear experiments. The text also discusses future applications of lasers in nuclear science, for example in nuclear astrophysics, isotope generation, nuclear fuel physics and proton and neutron imaging.

Download or read book Molten Salts written by Marcelle Gaune-Escard and published by Springer Science & Business Media. This book was released on 2002-01-31 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intending these truncated proceedings of the May 2001 meeting to serve as a textbook rather than an ordinary proceedings volume, Gaune-Escard (Institut Universitaire des Systemes Thermiques Industriels, France) presents 16 papers topics of molten salts including electronic properties, light and neutron scattering, thermodynamic modeling, pyrochemistry in the nuclear industry, electrochemical techniques, and molten salt batteries. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).

Download or read book Frontiers in Materials Modelling and Design written by Vijay Kumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is about fifteen years since we started hearing about Computational Ma terials Science and Materials Modelling and Design. Fifteen years is a long time and all of us realise that the use of computational methods in the design of materials has not been rapid enough. We also know the reasons for this. Mate rials properties are not dependent on a single phenomenon. The properties of materials cover a wide range from electronic, thermal, mechanical to chemical and electro-chemical. Each of these class of properties depend on specific phe nomenon that takes place at different scales or levels of length from sub atomic to visible length levels. The energies controlling the phenomena also varies widely from a fraction of an electron volt to many joules. The complexity of materials are such that while models and methods for treating individual phenomenon have been perfected, incorporating them into a single programme taking into account the synergism is a formidable task. Two specific areas where the progress has been very rapid and substantive are prediction of phase stability and phase diagrams and embrittlement of steels by metalloids. The first three sections of the book contain papers which review the theoreti cal principles underlying materials modeling and simulations and show how they can be applied to the problems just mentioned. There is now a strong interest in designing new materials starting from nanoparticles and clusters.

Download or read book Tea in Health and Disease Prevention written by Victor R Preedy and published by Elsevier. This book was released on 2024-09-14 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there is a nearly universal agreement that drinking tea can benefit health, information on the benefits or adverse effects of drinking tea is scattered, leaving definitive answers difficult to ascertain. Tea in Health and Disease Prevention, Second Edition, once again addresses this problem, bringing together all the latest and most relevant information on tea and its health effects into one comprehensive resource. This book covers compounds in black, green, and white teas and explores their health implications, first more generally, then in terms of specific organ systems and diseases. With over 75% brand new content, this fully reorganized, updated edition covers a wider range of tea varieties and beneficial compounds found in tea, such as epigallocatechin gallate and antioxidants.Tea in Health and Disease Prevention, Second Edition, is an organized, efficient resource that will help readers find quick answers to questions and will help inspire further studies for those interested in tea research. This is a must-have reference for researchers in food science and nutrition, as well as nutritionists and dieticians. - Covers and compares features, benefits, and potential negative effects of the most important types of tea, including green, black, and white - Identifies therapeutic benefits of teas for new product development - Offers a "one stop shop" for research in this area, compiling both foundational and cutting-edge topics into one resource - Includes a dictionary of key terms, other health effects of tea or extracts, and a summary point section within each chapter for a quick reference

Download or read book Nonlinear Dielectric Phenomena in Complex Liquids written by Sylwester J. Rzoska and published by Springer Science & Business Media. This book was released on 2004-07-28 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO ARW on Nonlinear Dielectric Phenomena in Complex Liquids, Jaszowiec-Ustron, Poland, 10-14 May 2003

Download or read book Advanced Technologies Systems and Applications II written by Mirsad Hadžikadić and published by Springer. This book was released on 2018-01-30 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative and interdisciplinary applications of advanced technologies. It includes the scientific outcomes of the 9th DAYS OF BHAAAS (Bosnian-Herzegovinian American Academy of Arts and Sciences) held in Banja Vrućica, Teslić, Bosnia and Herzegovina on May 25–28, 2017. This unique book offers a comprehensive, multidisciplinary and interdisciplinary overview of the latest developments in a broad section of technologies and methodologies, viewed through the prism of applications in computing, networking, information technology, robotics, complex systems, communications, energy, mechanical engineering, economics and medicine, to name just a few.

Download or read book Cosmic Magnetism written by Percy Seymour and published by CRC Press. This book was released on 1986 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of extraterrestrial magnetic fields is a relatively new one, confirmation of the existance of the first such field (that of our Sun) having come a s late as 1908. In the past 30 years a great ammount of knowledge has been accumulated on Cosmic Magnetism, which has turned out to be a truly fascinating topic for study. Percy Seymour's book is the first to deal with the topic in a non-mathematical way, and he offers a fine introduction to his subject. The first three chapters consolidate our knowledge on magnetism in general and the magnetic field of the Earth, as well as discussing the reasons for studying astronomy and cosmic magnetism in particular. The remainder of the book is devoted to the main areas of cosmic magnetism - solar, plantetary and interplanetary fields, fields in stars and pulsars, fields of the milky way and fields in other galaxies. Cosmic Magnetism in an ideal book for sixth-formers and undergraduates studying physics or astronomy and will also appeal to amateur astronomers. as previous work on this topic has been 'hidden' in specialised academic journals.

Download or read book Induction Accelerators written by Ken Takayama and published by Springer Science & Business Media. This book was released on 2010-10-05 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad class of accelerators rests on the induction principle whereby the accelerating electrical fields are generated by time-varying magnetic fluxes. Particularly suitable for the transport of bright and high-intensity beams of electrons, protons or heavy ions in any geometry (linear or circular) the research and development of induction accelerators is a thriving subfield of accelerator physics. This text is the first comprehensive account of both the fundamentals and the state of the art about the modern conceptual design and implementation of such devices. Accordingly, the first part of the book is devoted to the essential features of and key technologies used for induction accelerators at a level suitable for postgraduate students and newcomers to the field. Subsequent chapters deal with more specialized and advanced topics.

Download or read book Software Engineering Methods in Intelligent Algorithms written by Radek Silhavy and published by Springer. This book was released on 2019-05-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents software engineering methods in the context of the intelligent systems. It discusses real-world problems and exploratory research describing novel approaches and applications of software engineering, software design and algorithms. The book constitutes the refereed proceedings of the Software Engineering Methods in Intelligent Algorithms Section of the 8th Computer Science On-line Conference 2019 (CSOC 2019), held on-line in April 2019.

Download or read book Thermoelectricity Abstracts written by and published by . This book was released on 1960 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Soft Target Protection written by Ladislav Hofreiter and published by Springer. This book was released on 2021-08-26 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume includes articles presented during the Advanced Research Workshop on Soft Target Protection. The book presents important topics related to the protection of vulnerable objects and spaces, called Soft Targets. The chapters published in this book are thematically assigned to the blocks as follows: Theoretical aspect of soft target protection; Blast resistance of soft targets; Counter terrorism; Technical and technological solutions for soft target protection; Scheme and organizational measures; Blast protection and Forces for soft target protection. In this book, the reader will find a wealth of information about the theoretical background for designing protection of soft targets, as well as the specifics of protecting objects in armed conflict areas. New methods and procedures applicable to the soft target protection are described.

Download or read book Computational Rheology written by Robert G. Owens and published by World Scientific Publishing Company. This book was released on 2002 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work traces the development of numerical methods for non-Newtonian flows from the late 1960s to 2001. It begins with broad coverage of non-Newtonian fluids, including their mathematical modelling and analysis, and then specific computational techniques are discussed.

Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Fakher Chaari and published by Springer. This book was released on 2015-09-14 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.