Download or read book Progress in Computational Physics Volume 3 Novel Trends in Lattice Boltzmann Methods written by Matthias Ehrhardt and published by Bentham Science Publishers. This book was released on 2013-06-18 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Computational Physics is an e-book series devoted to recent research trends in computational physics. It contains chapters contributed by outstanding experts of modeling of physical problems. The series focuses on interdisciplinary computational perspectives of current physical challenges, new numerical techniques for the solution of mathematical wave equations and describes certain real-world applications. With the help of powerful computers and sophisticated methods of numerical mathematics it is possible to simulate many ultramodern devices, e.g. photonic crystals structures, semiconductor nanostructures or fuel cell stacks devices, thus preventing expensive and longstanding design and optimization in the laboratories. In this book series, research manuscripts are shortened as single chapters and focus on one hot topic per volume. Engineers, physicists, meteorologists, etc. and applied mathematicians can benefit from the series content. Readers will get a deep and active insight into state-of-the art modeling and simulation techniques of ultra-modern devices and problems. The third volume - Novel Trends in Lattice Boltzmann Methods - Reactive Flow, Physicochemical Transport and Fluid-Structure Interaction - contains 10 chapters devoted to mathematical analysis of different issues related to the lattice Boltzmann methods, advanced numerical techniques for physico-chemical flows, fluid structure interaction and practical applications of these phenomena to real world problems.
Download or read book Novel Trends in Lattice Boltzmann Methods written by Matthias Ehrhardt and published by Progress in Comuptational Phys. This book was released on 2013-06-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Computational Physics is a book series devoted to recent research trends in computational physics. It contains chapters contributed by outstanding experts of modeling of physical problems. The series focuses on interdisciplinary computational perspectives of current physical challenges, new numerical techniques for the solution of mathematical wave equations and describes certain real-world applications. With the help of powerful computers and sophisticated methods of numerical mathematics it is possible to simulate many ultramodern devices, e.g. photonic crystals structures, semiconductor nanostructures or fuel cell stacks devices, thus preventing expensive and longstanding design and optimization in the laboratories. In this book series, research manuscripts are shortened as single chapters and focus on one hot topic per volume. Engineers, physicists, meteorologists, etc. and applied mathematicians can benefit from the series content. Readers will get a deep and active insight into state-of-the art modeling and simulation techniques of ultra-modern devices and problems. The third volume - Novel Trends in Lattice Boltzmann Methods - Reactive Flow, Physicochemical Transport and Fluid-Structure Interaction - contains 09 chapters devoted to mathematical analysis of different issues related to the lattice Boltzmann methods, advanced numerical techniques for physico-chemical flows, fluid structure interaction and practical applications of these phenomena to real world problems.
Download or read book Annual Reviews of Computational Physics IV written by Dietrich Stauffer and published by World Scientific. This book was released on 1996 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum phenomena and methods are the core of this volume in our series which publishes rapidly reviews of topics in computational physics. In addition, we look at phase transitions in Ising lattices, in continuum fluids, polymer solutions, and end with biological ageing. As before, papers were submitted by e-mail, and these files were used directly to produce the book, for increased speed and reliability.
Download or read book Lattice Boltzmann Modeling written by Michael C. Sukop and published by Springer Science & Business Media. This book was released on 2007-04-05 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a basic introduction to Lattice Boltzmann models that emphasizes intuition and simplistic conceptualization of processes, while avoiding the complex mathematics that underlies LB models. The model is viewed from a particle perspective where collisions, streaming, and particle-particle/particle-surface interactions constitute the entire conceptual framework. Beginners and those whose interest is in model application over detailed mathematics will find this a powerful 'quick start' guide. Example simulations, exercises, and computer codes are included.
Download or read book Annual Reviews of Computational Physics VII written by Dietrich Stauffer and published by World Scientific. This book was released on 2000 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventh volume of this invaluable series focuses an applications ? from Ising models to the formation of small clusters and phase ordering in fluids, to the structure of concrete, to the growth of cities built from it, to the traffic jams and the biology of life in the cities, and to the marketing of products to consumers. Thus the interdisciplinary research potential of computational physics is particularly well documented.
Download or read book The Lattice Boltzmann Method written by Timm Krüger and published by Springer. This book was released on 2016-11-07 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the theory, practice, and implementation of the Lattice Boltzmann (LB) method, a powerful computational fluid dynamics method that is steadily gaining attention due to its simplicity, scalability, extensibility, and simple handling of complex geometries. The book contains chapters on the method's background, fundamental theory, advanced extensions, and implementation. To aid beginners, the most essential paragraphs in each chapter are highlighted, and the introductory chapters on various LB topics are front-loaded with special "in a nutshell" sections that condense the chapter's most important practical results. Together, these sections can be used to quickly get up and running with the method. Exercises are integrated throughout the text, and frequently asked questions about the method are dealt with in a special section at the beginning. In the book itself and through its web page, readers can find example codes showing how the LB method can be implemented efficiently on a variety of hardware platforms, including multi-core processors, clusters, and graphics processing units. Students and scientists learning and using the LB method will appreciate the wealth of clearly presented and structured information in this volume.
Download or read book An Introduction to Computational Physics written by Tao Pang and published by Cambridge University Press. This book was released on 2006-01-19 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced textbook provides an introduction to the basic methods of computational physics.
Download or read book The Lattice Boltzmann Equation written by Sauro Succi and published by Oxford University Press. This book was released on 2018 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory textbook to Lattice Boltzmann methods in computational fluid dynamics, aimed at a broad audience of scientists working with flowing matter. LB has known a burgeoning growth of applications, especially in connection with the simulation of complex flows, and also on the methodological side.
Download or read book Kinetic Theory and Fluid Dynamics written by Yoshio Sone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is intended to provide a comprehensive description of the rela tion between kinetic theory and fluid dynamics for a time-independent behavior of a gas in a general domain. A gas in a steady (or time-independent) state in a general domain is considered, and its asymptotic behavior for small Knudsen numbers is studied on the basis of kinetic theory. Fluid-dynamic-type equations and their associated boundary conditions, together with their Knudsen-layer corrections, describing the asymptotic behavior of the gas for small Knudsen numbers are presented. In addition, various interesting physical phenomena derived from the asymptotic theory are explained. The background of the asymptotic studies is explained in Chapter 1, accord ing to which the fluid-dynamic-type equations that describe the behavior of a gas in the continuum limit are to be studied carefully. Their detailed studies depending on physical situations are treated in the following chapters. What is striking is that the classical gas dynamic system is incomplete to describe the behavior of a gas in the continuum limit (or in the limit that the mean free path of the gas molecules vanishes). Thanks to the asymptotic theory, problems for a slightly rarefied gas can be treated with the same ease as the corresponding classical fluid-dynamic problems. In a rarefied gas, a temperature field is di rectly related to a gas flow, and there are various interesting phenomena which cannot be found in a gas in the continuum limit.
Download or read book Lattice Gas Cellular Automata and Lattice Boltzmann Models written by Dieter A. Wolf-Gladrow and published by Springer. This book was released on 2004-10-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lattice-gas cellular automata (LGCA) and lattice Boltzmann models (LBM) are relatively new and promising methods for the numerical solution of nonlinear partial differential equations. The book provides an introduction for graduate students and researchers. Working knowledge of calculus is required and experience in PDEs and fluid dynamics is recommended. Some peculiarities of cellular automata are outlined in Chapter 2. The properties of various LGCA and special coding techniques are discussed in Chapter 3. Concepts from statistical mechanics (Chapter 4) provide the necessary theoretical background for LGCA and LBM. The properties of lattice Boltzmann models and a method for their construction are presented in Chapter 5.
Download or read book University Physics written by OpenStax and published by . This book was released on 2016-11-04 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: University Physics is a three-volume collection that meets the scope and sequence requirements for two- and three-semester calculus-based physics courses. Volume 1 covers mechanics, sound, oscillations, and waves. Volume 2 covers thermodynamics, electricity and magnetism, and Volume 3 covers optics and modern physics. This textbook emphasizes connections between between theory and application, making physics concepts interesting and accessible to students while maintaining the mathematical rigor inherent in the subject. Frequent, strong examples focus on how to approach a problem, how to work with the equations, and how to check and generalize the result. The text and images in this textbook are grayscale.
Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.
Download or read book Recent Advances in Multidisciplinary Applied Physics written by Antonio Mendez-Vilas and published by Elsevier. This book was released on 2005-09-28 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st International Meeting on Applied Physics (APHYS-2003) succeeded in creating a new international forum for applied physics in Europe, with specific interest in the application of techniques, training, and culture of physics to research areas usually associated with other scientific and engineering disciplines.This book contains a selection of peer-reviewed papers presented at APHYS-2003, held in Badajoz (Spain), from 15th to 18th October 2003, which included the following Plenary Lectures:* Nanobiotechnology - Interactions of Cells with Nanofeatured Surfaces and with Nanoparticles* Radiation Protection of Nuclear Workers - Ethical Issues* Chaotic Data Encryption for Optical Communications
Download or read book Subject Guide to Books in Print written by and published by . This book was released on 1975 with total page 2486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Topological Methods in Molecular Chemistry written by Remi Chauvin and published by Springer. This book was released on 2016-04-19 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first edited volume that features two important frameworks, Hückel and quantum chemical topological analyses. The contributors, which include an array of academics of international distinction, describe recent applications of such topological methods to various fields and topics that provide the reader with the current state-of-the-art and give a flavour of the wide range of their potentialities.
Download or read book Advances in Theory and Practice of Computational Mechanics written by Lakhmi C. Jain and published by Springer Nature. This book was released on 2020-03-31 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses physical and mathematical models, numerical methods, computational algorithms and software complexes, which allow high-precision mathematical modeling in fluid, gas, and plasma mechanics; general mechanics; deformable solid mechanics; and strength, destruction and safety of structures. These proceedings focus on smart technologies and software systems that provide effective solutions to real-world problems in applied mechanics at various multi-scale levels. Highlighting the training of specialists for the aviation and space industry, it is a valuable resource for experts in the field of applied mathematics and mechanics, mathematical modeling and information technologies, as well as developers of smart applied software systems.
Download or read book Tensor Network Contractions written by Shi-Ju Ran and published by Springer Nature. This book was released on 2020-01-27 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensor network is a fundamental mathematical tool with a huge range of applications in physics, such as condensed matter physics, statistic physics, high energy physics, and quantum information sciences. This open access book aims to explain the tensor network contraction approaches in a systematic way, from the basic definitions to the important applications. This book is also useful to those who apply tensor networks in areas beyond physics, such as machine learning and the big-data analysis. Tensor network originates from the numerical renormalization group approach proposed by K. G. Wilson in 1975. Through a rapid development in the last two decades, tensor network has become a powerful numerical tool that can efficiently simulate a wide range of scientific problems, with particular success in quantum many-body physics. Varieties of tensor network algorithms have been proposed for different problems. However, the connections among different algorithms are not well discussed or reviewed. To fill this gap, this book explains the fundamental concepts and basic ideas that connect and/or unify different strategies of the tensor network contraction algorithms. In addition, some of the recent progresses in dealing with tensor decomposition techniques and quantum simulations are also represented in this book to help the readers to better understand tensor network. This open access book is intended for graduated students, but can also be used as a professional book for researchers in the related fields. To understand most of the contents in the book, only basic knowledge of quantum mechanics and linear algebra is required. In order to fully understand some advanced parts, the reader will need to be familiar with notion of condensed matter physics and quantum information, that however are not necessary to understand the main parts of the book. This book is a good source for non-specialists on quantum physics to understand tensor network algorithms and the related mathematics.
