Download or read book Progress in Automation Robotics and Measuring Techniques written by Roman Szewczyk and published by Springer. This book was released on 2015-03-09 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent progresses in control, automation, robotics and measuring techniques. It includes contributions of top experts in the fields, focused on both theory and industrial practice. The particular chapters present a deep analysis of a specific technical problem which is in general followed by a numerical analysis and simulation and results of an implementation for the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be useful for both researchers working in the area of engineering sciences and for practitioners solving industrial problems.
Download or read book Recent Advances in Automation Robotics and Measuring Techniques written by Roman Szewczyk and published by Springer. This book was released on 2014-07-08 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the recent advances and developments in control, automation, robotics and measuring techniques. It presents contributions of top experts in the fields, focused on both theory and industrial practice. The particular chapters present a deep analysis of a specific technical problem which is in general followed by a numerical analysis and simulation and results of an implementation for the solution of a real world problem. The book presents the results of the International Conference AUTOMATION 2014 held 26 - 28 March, 2014 in Warsaw, Poland on Automation – Innovations and Future Prospectives The presented theoretical results, practical solutions and guidelines will be useful for both researchers working in the area of engineering sciences and for practitioners solving industrial problems.
Download or read book Challenges in Automation Robotics and Measurement Techniques written by Roman Szewczyk and published by Springer. This book was released on 2016-02-15 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the set of papers accepted for presentation at the International Conference Automation, held in Warsaw, 2-4 March of 2016. It presents the research results presented by top experts in the fields of industrial automation, control, robotics and measurement techniques. Each chapter presents a thorough analysis of a specific technical problem which is usually followed by numerical analysis, simulation, and description of results of implementation of the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be valuable for both researchers working in the area of engineering sciences and for practitioners solving industrial problems.
Download or read book Control Computer Engineering and Neuroscience written by Szczepan Paszkiel and published by Springer Nature. This book was released on 2021-03-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 4th International Scientific Conference IC BCI 2021 Opole, Poland. The event was held at Opole University of Technology in Poland on 21 September 2021. Since 2014, the conference has taken place every two years at the University’s Faculty of Electrical Engineering, Automatic Control and Informatics. The conference focused on the issues relating to new trends in modern brain–computer interfaces (BCI) and control engineering, including neurobiology–neurosurgery, cognitive science–bioethics, biophysics–biochemistry, modeling–neuroinformatics, BCI technology, biomedical engineering, control and robotics, computer engineering and neurorehabilitation–biofeedback.
Download or read book Recent Advances in Systems Control and Information Technology written by Roman Szewczyk and published by Springer. This book was released on 2016-11-29 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.
Download or read book Automation 2018 written by Roman Szewczyk and published by Springer. This book was released on 2018-03-07 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at Automation 2018, an international conference held in Warsaw from March 21 to 23, 2018. It discusses the radical technological changes occurring due to the INDUSTRY 4.0, with a focus on offering a better understanding of the Fourth Industrial Revolution. Each chapter presents a detailed analysis of interdisciplinary knowledge, numerical modeling and simulation as well as the application of cyber-physical systems, where information technology and physical devices create synergic systems leading to unprecedented efficiency. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book Advanced Mechatronics Solutions written by Ryszard Jabłoński and published by Springer. This book was released on 2015-11-02 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the most rapidly changing areas of mechatronics, this book discusses signals and system control, mechatronic products, metrology and nanometrology, automatic control & robotics, biomedical engineering, photonics, design manufacturing and testing of MEMS. It is reflected in the list of contributors, including an international group of 302 leading researchers representing 12 countries. The book is intended for use in academic, government and industry R&D departments, as an indispensable reference tool for the years to come. Thid volume can serve a global community as the definitive reference source in Mechatronics. The book comprises carefully selected 93 contributions presented at the 11th International Conference Mechatronics 2015, organized by Faculty of Mechatronics, Warsaw University of Technology, on September 21-23, in Warsaw, Poland.
Download or read book Automation 2019 written by Roman Szewczyk and published by Springer. This book was released on 2019-02-15 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at AUTOMATION2019, an international conference held in Warsaw from March 27 to 29, 2019. It discusses the radical technological changes occurring due to the INDUSTRY 4.0. To follow these changes, both scientists and engineers have to face the challenge of interdisciplinary approach directed at the development of cyber-physical systems. This approach encompasses interdisciplinary theoretical knowledge, numerical modelling and simulation as well as application of artificial intelligence techniques. Both software and physical devices are composed into systems that will increase production efficiency and resource savings. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book Automation 2019 written by Roman Szewczyk and published by Springer. This book was released on 2019-02-16 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at AUTOMATION2019, an international conference held in Warsaw from March 27 to 29, 2019. It discusses the radical technological changes occurring due to the INDUSTRY 4.0. To follow these changes, both scientists and engineers have to face the challenge of interdisciplinary approach directed at the development of cyber-physical systems. This approach encompasses interdisciplinary theoretical knowledge, numerical modelling and simulation as well as application of artificial intelligence techniques. Both software and physical devices are composed into systems that will increase production efficiency and resource savings. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.
Download or read book Advances in Manufacturing written by Adam Hamrol and published by Springer. This book was released on 2017-10-18 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in material, mechanical, and management engineering, especially in the area of machine design, product assembly, measurement systems, process planning and quality control. It describes cutting-edge methods and applications, together with exemplary case studies. The content is based on papers presented at the 5th International Scientific-Technical Conference (MANUFACTURING 2017) held in Poznan, Poland on 24-26 October 2017. The book brings together engineering and economic topics, is intended as an extensive, timely and practice-oriented reference guide for researchers and practitioners, and is expected to foster better communication and closer cooperation between universities and their business and industry partners.
Download or read book Theoretical Developments and Applications of Non Integer Order Systems written by Stefan Domek and published by Springer. This book was released on 2015-08-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to presentation of new results of research on systems of non-integer order, called also fractional systems. Their analysis and practical implementation have been the object of spontaneous development for a few last decades. The fractional order models can depict a physical plant better than the classical integer order ones. This covers different research fields such as insulator properties, visco-elastic materials, electrodynamic, electrothermal, electrochemical, economic processes modelling etc. On the other hand fractional controllers often outperform their integer order counterparts. This volume contains new ideas and examples of implementation, theoretical and pure practical aspects of using a non-integer order calculus. It is divided into four parts covering: mathematical fundamentals, modeling and approximations, controllability, observability and stability problems and practical applications of fractional control systems. The first part expands the base of tools and methods of the mathematical basis for non-integer order calculus. Part two focuses on new methods and developments in process modeling and fractional derivatives approximations. In the third part a bunch of papers which raise problems of controllability, observability and stability of non-integer order systems is provided. Part four is devoted to presentation of different fractional order control applications. This book was created thanks to many experts in the field of fractional calculus: authors, anonymous referees whose comments allowed us to improve the final form of the papers and active and inspiring discussion of the participants of RRNR'2015, the 7th Conference on Non-Integer Order Calculus and Its Applications that was organized by the Faculty of Electrical Engineering, West Pomeranian University of Technology, Szczecin, Poland.
Download or read book Mechatronics 2019 Recent Advances Towards Industry 4 0 written by Roman Szewczyk and published by Springer Nature. This book was released on 2019-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at Mechatronics 2019, an international conference held in Warsaw, Poland, from September 16 to 18, 2019. The contributions discuss the numerous, multidisciplinary technological advances in the field of applied mechatronics that the emerging Industry 4.0 has already yielded. Each chapter presents a particular example of interdisciplinary theoretical knowledge, numerical modelling and simulation, or the application of artificial intelligence techniques. Further, the papers show how both software and physical devices can be incorporated into mechatronic systems to increase production efficiency and resource savings. The results and guidelines presented here will benefit both scientists and engineers looking for solutions to specific industrial and research problems.
Download or read book Advanced Contemporary Control written by Andrzej Bartoszewicz and published by Springer Nature. This book was released on 2020-06-24 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 20th Polish Control Conference. A triennial event that was first held in 1958, the conference successfully combines its long tradition with a modern approach to shed light on problems in control engineering, automation, robotics and a wide range of applications in these disciplines. The book presents new theoretical results concerning the steering of dynamical systems, as well as industrial case studies and worked solutions to real-world problems in contemporary engineering. It particularly focuses on the modelling, identification, analysis and design of automation systems; however, it also addresses the evaluation of their performance, efficiency and reliability. Other topics include fault-tolerant control in robotics, automated manufacturing, mechatronics and industrial systems. Moreover, it discusses data processing and transfer issues, covering a variety of methodologies, including model predictive, robust and adaptive techniques, as well as algebraic and geometric methods, and fractional order calculus approaches. The book also examines essential application areas, such as transportation and autonomous intelligent vehicle systems, robotic arms, mobile manipulators, cyber-physical systems, electric drives and both surface and underwater marine vessels. Lastly, it explores biological and medical applications of the control-theory-inspired methods.
Download or read book Algorithms and Law written by Martin Ebers and published by Cambridge University Press. This book was released on 2020-07-23 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algorithms permeate our lives in numerous ways, performing tasks that until recently could only be carried out by humans. Artificial Intelligence (AI) technologies, based on machine learning algorithms and big-data-powered systems, can perform sophisticated tasks such as driving cars, analyzing medical data, and evaluating and executing complex financial transactions - often without active human control or supervision. Algorithms also play an important role in determining retail pricing, online advertising, loan qualification, and airport security. In this work, Martin Ebers and Susana Navas bring together a group of scholars and practitioners from across Europe and the US to analyze how this shift from human actors to computers presents both practical and conceptual challenges for legal and regulatory systems. This book should be read by anyone interested in the intersection between computer science and law, how the law can better regulate algorithmic design, and the legal ramifications for citizens whose behavior is increasingly dictated by algorithms.
Download or read book Bridging the Semantic Gap in Image and Video Analysis written by Halina Kwaśnicka and published by Springer. This book was released on 2018-02-20 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research on various ways to bridge the semantic gap in image and video analysis. The respective chapters address different stages of image processing, revealing that the first step is a future extraction, the second is a segmentation process, the third is object recognition, and the fourth and last involve the semantic interpretation of the image. The semantic gap is a challenging area of research, and describes the difference between low-level features extracted from the image and the high-level semantic meanings that people can derive from the image. The result greatly depends on lower level vision techniques, such as feature selection, segmentation, object recognition, and so on. The use of deep models has freed humans from manually selecting and extracting the set of features. Deep learning does this automatically, developing more abstract features at the successive levels. The book offers a valuable resource for researchers, practitioners, students and professors in Computer Engineering, Computer Science and related fields whose work involves images, video analysis, image interpretation and so on.
Download or read book Applications of Brain Computer Interfaces in Intelligent Technologies written by Szczepan Paszkiel and published by Springer Nature. This book was released on 2022-07-08 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The BCI technology finds newer and newer implementations. Year by year, the number of publications in this field grows exponentially. This book attempts to describe the implementation of the brain-computer technology based on both STM32 and Arduino microcontrollers. In addition, the application of BCI technology in the field of intelligent houses, robotic lines as well as in the field of bionic prostheses was presented. One of the chapters of the monograph also discusses the issue of fMRI in the context of the possibility of analyzing images made as part of fMRI through solutions based on machine learning. A practical implementation of the TensorFlow framework was presented. The fMRI technique is also often implemented in BCI solutions. The conducted literature studies show that the technology of BCI is undoubtedly a technology of the future. However, there is a need for continuous development of biomedical signal processing methods in order to obtain the most efficient implementations in the case of non-invasive implementation of BCI technology based on EEG. The further development of BCI technology has a huge impact on the techniques of rehabilitation of people with disabilities. Nowadays, wheelchairs are being constructed, thanks to which a disabled person is physically able to direct his position in a certain direction and at a certain speed. Thanks to BCI, it is also possible to create an individual speech synthesizer, with the help of which a paralyzed person will be able to communicate with the outside world. New limb prostheses that will replace the lost locomotor system in almost one hundred percent are still being developed. Some prostheses are connected to the human nervous system, thanks to which they are able to send feedback to our brain about the shape, hardness and temperature of the object held in the artificial limb.
Download or read book Advances and Applications in Computer Science Electronics and Industrial Engineering written by Jyrki Nummenmaa and published by Springer Nature. This book was released on 2019-10-23 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Conference on Computer Science, Electronics and Industrial Engineering (CSEI 2019), held in Ambato in October 2019, with participants from 13 countries and guest speakers from Chile, Colombia, France, Japan, Spain, Portugal, and United States. Featuring 23 peer-reviewed papers, it discusses topics such as the use of metaheuristic for non-deterministic problem solutions, software architectures for supporting e-government initiatives, and the use of electronics in e-learning and industrial environments. It also includes contributions illustrating how new approaches on these converging research areas are impacting the development of human societies around the world into Society 5.0. As such, it is a valuable resource for scholars and practitioners alike.
