Download or read book Programme and The Book of Abstracts Eleventh Annual Conference YUCOMAT 2009 written by Dragan Uskoković and published by Institute of Technical Sciences of SASA. This book was released on 2009-08-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Conference on materials science and engineering, including physics, physical chemistry, condensed matter chemistry, and technology in general, was held in September 1995, in Herceg Novi. An initiative to establish Yugoslav Materials Research Society was born at the conference and, similar to other MR societies in the world, the programme was made and objectives determined. The Yugoslav Materials Research Society (Yu-MRS), a nongovernment and non-profit scientific association, was founded in 1997 to promote multidisciplinary goal-oriented research in materials science and engineering. The main task and objective of the Society has been to encourage creativity in materials research and engineering to reach a harmonic coordination between achievements in this field in our country and analogous activities in the world with an aim to include our country into global international projects. Until 2003, Conferences were held every second year and then they grew into Annual Conferences that were traditionally held in Herceg Novi in September of every year. In 2007 Yu-MRS formed two new MRS: MRS-Serbia (official successor of Yu-MRS) and MRS-Montenegro (in founding). In 2008, MRS - Serbia became a member of FEMS (Federation of European Materials Societies).
Download or read book The Thirteenth Annual Conference YUCOMAT 2011 Programme and the Book of Abstracts written by Uskokovic, Dragan P. and published by Materials Research Society of Serbia. This book was released on with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Fifteenth Annual Conference YUCOMAT 2013 Programme and the Book of Abstracts written by Uskokovic, Dragan P. and published by Materials Research Society of Serbia. This book was released on with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 11th Annual Conference written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Seventeenth Annual Conference YUCOMAT 2015 written by Dragan Uskoković and published by Materials Research Society of Serbia. This book was released on 2015-08-13 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing provided
Download or read book The Joint Event of the Eleventh Young Researchers Conference Materials Science and Engineering and The First European Early Stage Researchers Conference on Hydrogen Storage Belgrade December 3rd 5th 2012 written by Jasmina Grbović Novaković and published by Institut tehničkih naukaSANU. This book was released on 2012-12-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Young Researchers' meetings are held annually late in December since 2002 and they are organized by the Materials Research Society of Serbia. Originally conceived as seminars, since 2007 these meetings were transformed into conferences. The previous ten meetings featured presentations based on the research of various young scientists from Serbia, Bosnia and Herzegovina, Montenegro, Slovenia, Brazil, Germany, United States of America, China, Poland, Belgium, Spain, Romania, United Kingdom, Austria, Italy, Hungary, Russia, Canada, etc. At the Conference, young researchers, students of doctoral, master and undergraduate studies, are given the opportunity to make an overview of their research into materials science and engineering through oral and poster presentations. As for the scientific content of the conference, we have given full priority to research topics that are currently considered as being on the frontier of the field. Nanotechnology and Advanced Materials, Synthesis and Engineering of Biomaterials, Application of Biomaterials, Theoretical Modeling of Materials and Advanced Methods for Synthesis and Processing present only some of those exciting topics that will be given the central stage and most attention during this meeting. The conference is free of charge and the participants are invited to submit their papers to the journals Tehnika – Novi Materijali, Processing and Application of Ceramics and Energija. Early Stage Researchers’ Conference of Hydrogen Storage is held in Belgrade for the first time under the auspices of the COST ACTION MP 1103. The aim of the meeting is to gather the young researchers from all over Europe and the Word dealing with hydrogen energy, to discuss on the important issues regarding hydrogen storage and production. The papers from this conference will be published in International Journal of Hydrogen Energy Special Issue and Energija in order to disseminate the knowledge and to improve the visibility of our COST Action MP1103.
Download or read book Mechanochemistry in Nanoscience and Minerals Engineering written by Peter Balaz and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemistry as a branch of solid state chemistry enquires into processes which proceed in solids due to the application of mechanical energy. This provides a thorough, up to date overview of mechanochemistry of solids and minerals. Applications of mechanochemistry in nanoscience with special impact on nanogeoscience are described. Selected advanced identification methods, most frequently applied in nanoscience, are described as well as the advantage of mechanochemical approach in minerals engineering. Examples of industrial applications are given. Mechanochemical technology is being applied in many industrial fields: powder metallurgy (synthesis of nanometals, alloys and nanocompounds), building industry (activation of cements), chemical industry (solid waste treatment, catalyst synthesis, coal ashes utilization), minerals engineering (ore enrichment, enhancement of processes of extractive metallurgy), agriculture industry (solubility increase of fertilizers), and pharmaceutical industry (improvement of solubility and bioavailability of drugs). This reference serves as an introduction to newcomers to mechanochemistry, and encourages more experienced researchers to broaden their knowledge and discover novel applications in the field.
Download or read book Nanotechnologies in Preventive and Regenerative Medicine written by Vuk Uskokovic and published by Elsevier. This book was released on 2017-10-30 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnologies in Preventative and Regenerative Medicine demonstrates how control at the nanoscale can help achieve earlier diagnoses and create more effective treatments. Chapters take a logical approach, arranging materials by their area of application. Biomaterials are, by convention, divided according to the area of their application, with each chapter outlining current challenges before discussing how nanotechnology and nanomaterials can help solve these challenges This applications-orientated book is a valuable resource for researchers in biomedical science who want to gain a greater understanding on how nanotechnology can help create more effective vaccines and treatments, and to nanomaterials researchers seeking to gain a greater understanding of how these materials are applied in medicine. Demonstrates how nanotechnology can help achieve more successful diagnoses at an earlier stage Explains how nanomaterials can be manipulated to create more effective drug treatments Offers suggestions on how the use of nanotechnology might have future applications to create even more effective treatments
Download or read book New Materials and Processing Technologies written by Tomasz Tokarski and published by Trans Tech Publications Ltd. This book was released on 2015-04-10 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the International Conference of Non-Ferrous Metals - Processing and New Technologies, June 4-6, 2014, Wis?a, Poland. The 40 papers are grouped as follows: Chapter 1: Materials and Related Industrial Technologies; Chapter 2: Metalworking
Download or read book 3rd International Symposium on Materials for Energy Storage and Conversion September 10th 12th 2018 Belgrade Serbia written by Dr. Jasmina Grbović Novaković and published by Institut za nuklearne nauke VINČA. This book was released on 2018-09-10 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book Title: 3rd International Symposium on Materials for Energy Storage and Conversion - mESC-IS 2018, Program and the Book of Abstracts Conference Chair Jasmina Grbović Novaković, Vinča Institute, Belgrade, Serbia Conference Vice chair(s) Bojana Paskaš Mamula, Vinča Institute, Belgrade, Serbia Sandra Kurko, Vinča Institute, Belgrade, Serbia Nikola Novaković, Vinča Institute, Belgrade, Serbia Sanja Milošević Govedarović, Vinča Institute, Belgrade, Serbia International Advisory Board Dag Noreus, Stockholm University, Sweden Daniel Fruchart, Neel Institute, Grenoble, France Volodymyr Yartys, Institute for Energy Technology, Kjeller, Norway Amelia Montone, ENEA, Casaccia, Italy Patricia de Rango, Neel Institute, Grenoble, France Nataliya Skryabina, Perm State University, Russia Jose Ramon Ares Fernandez, Universidad Autónoma de Madrid, Spain Tayfur Öztürk, Middle East Technical University, Ankara, Turkey Kadri Aydınol Middle East Technical University, Ankara Ruth Imnadze, Tblisi State University, Tbilisi Saban Patat, Erciyes University, Kayseri Slavko Mentus, Faculty of Physical Chemistry, University of Belgrade, Serbia Šćepan Miljanić, Faculty of Physical Chemistry, University of Belgrade, Serbia Jasmina Grbovic-Novakovic, Vinca Institute of Nuclear Sciences, Belgrade Branimir Banov, IEES, Bulgarian Academy of Sciences, Sofia, Bulgaria Fermin Cuevas, ICMPE/CNRS, Paris, France Darius Milčius, LEI, Kaunas, Lithuania Junxian Zhang, ICMPE/CNRS, Paris, France Montse Casas-Cabanas, CIC Energigune, Álava, Spain 4 mESC-IS 2018, 3rd Int. Symposium on Materials for Energy Storage and Conversion, Belgrade, Serbia Program committee Tayfur Öztürk, Middle East Technical University, Ankara, Turkey Adam Revesz, Eotvos University, Budapest, Hungary Dan Lupu, INCDTIM, Cluj-Napoca, Romania Georgia Charalambopoulou, NCSR Demokritos, Greece Miran Gaberšček, National Institute of Chemistry, Ljubljana, Slovenia Nikola Biliškov, Ruđer Bošković Institute, Zagreb, Croatia Maja Buljan, Ruđer Bošković Institute, Zagreb, Croatia Branimir Banov, IEES, Bulgarian Academy of Sciences, Sofia, Bulgaria Tony Spassov, Faculty of Chemistry and Pharmacy, Sofia University, Bulgaria Perica Paunovic, FTM, Skopje, Macedonia Siniša Ignjatović, UNIBL, Banja Luka, Bosnia and Herzegovina Dragana Jugović, Inst Tech Sci SASA, Belgrade, Serbia Ivana Stojković Simatović, Faculty of Physical Chemistry, University of Belgrade, Serbia Igor Pašti, Faculty of Physical Chemistry, University of Belgrade, Serbia Nenad Ivanović, Vinča Institute, Belgrade, Serbia Ivana Radisavljević, Vinča Institute, Belgrade, Serbia Milica Marčeta Kaninski, Vinča Institute, Belgrade, Serbia Jasmina Grbović Novaković, Vinča Institute, Belgrade, Serbia Nikola Novaković, Vinča Institute, Belgrade, Serbia Sandra Kurko, Vinča Institute, Belgrade, Serbia Organizing committee Bojana Paskaš Mamula, Vinča Institute, Belgrade, Serbia Jelena Milićević, Vinča Institute, Belgrade, Serbia Tijana Pantić, Vinča Institute, Belgrade, Serbia Sanja Milošević Govedarović, Vinča Institute, Belgrade, Serbia Jana Radaković, Vinča Institute, Belgrade, Serbia Katarina Batalović, Vinča Institute, Belgrade, Serbia Igor Milanović, Ruđer Bošković Institute, Zagreb, Croatia,Vinča Institute, Belgrade, Serbia Andjelka Djukić, Vinča Institute, Belgrade, Serbia Bojana Kuzmanović, Vinča Institute, Belgrade, Serbia Mirjana Medić Ilić, Vinča Institute, Belgrade, Serbia Jelena Rmuš, Vinča Institute, Belgrade, Serbia Željko Mravik, Vinča Institute, Belgrade, Serbia Dear Colleagues, Welcome to 3rd International Symposium on Materials for Energy Storage and Conversion - mESC-IS 2018 and the town of Belgrade! The aim of the symphosium is to gather the researchers from Balkans, and all over Europe dealing with energy related materials to discuss on the important issues regarding energy storage, harvesting and conversion. First two very succesful symposia were organised in Turkey in 2015 and 2017 by professor Tayfur Öztürk, METU. The symposium, as before, will provide a forum for discussion in recent progress made in three major activity areas, namely batteries, solid state hydrogen storage and fuel cells. The symposium have a fair balance of plenary sessions covering cross-cutting issues and the state of the art reviews and parallel sessions with contributed papers and poster presentation. The papers from this conference will be published in International Journal of Hydrogen Energy Special Issue in order to disseminate the knowledge and to improve the visibility of symposiun Dr. Jasmina Grbović Novaković Dr. Nikola Novaković Dr. Sandra Kurko
Download or read book Programme and The Book of Abstracts Twelfth Annual Conference YUCOMAT 2010 written by Dragan Uskoković and published by Institute of Technical Sciences of the Serbian Academy of Sciences and Arts. This book was released on 2010-08-01 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Conference on materials science and engineering, including physics, physical chemistry, condensed matter chemistry, and technology in general, was held in September 1995, in Herceg Novi. An initiative to establish Yugoslav Materials Research Society was born at the conference and, similar to other MR societies in the world, the programme was made and objectives determined. The Yugoslav Materials Research Society (Yu-MRS), a nongovernment and non-profit scientific association, was founded in 1997 to promote multidisciplinary goal-oriented research in materials science and engineering. The main task and objective of the Society has been to encourage creativity in materials research and engineering to reach a harmonic coordination between achievements in this field in our country and analogous activities in the world with an aim to include our country into global international projects. Until 2003, Conferences were held every second year and then they grew into Annual Conferences that were traditionally held in Herceg Novi in September of every year. In 2007 Yu-MRS formed two new MRS: MRS-Serbia (official successor of Yu-MRS) and MRS-Montenegro (in founding). In 2008, MRS – Serbia became a member of FEMS (Federation of European Materials Societies). The Twelfth Annual Conference YUCOMAT 2010 was held on September 6-10, 2010 in Heceg Novi, Montenegro
Download or read book Photon Working Switches written by Yasushi Yokoyama and published by Springer. This book was released on 2017-05-29 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on photoswitches. The objective of the book is to introduce researchers and graduate course students who are interested in "photon-working switches" not only to the fundamentals but also to the latest research being carried out in this field. Light can reach a target substrate without any physical contact to deliver energy. The energy can induce changes in the structure of the molecules included in the substrate so that its properties and functions are made switchable by light irradiation. When a substrate is able to revert to its original state, this system can be regarded as a "photon-working switch". The terms "photon-working switches" or "photoswitches" are almost equivalent in meaning to "photochromism"; however, they focus on the "switching of functions" of chemical species rather than their "reversible transformation". Most of the authors of this volume are members of PHENICS, an international research group on organic molecular photoswitches composed of research institutions from France, Japan, Russia, China and Germany. Since its inception in 2008, PHENICS has promoted active research to develop the field. This book commemorates the group's eighth year of collaborative research.
Download or read book Field Assisted Sintering written by Eugene A. Olevsky and published by Springer. This book was released on 2018-08-09 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.
Download or read book Nanostructured Conductive Polymers written by Ali Eftekhari and published by John Wiley & Sons. This book was released on 2011-07-07 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a vital link between nanotechnology and conductive polymers, this book covers advances in topics of this interdisciplinary area. In each chapter, there is a discussion of current research issues while reviewing the background of the topic. The selection of topics and contributors from around the globe make this text an outstanding resource for researchers involved in the field of nanomaterials or polymer materials design. The book is divided into three sections: From Conductive Polymers to Nanotechnology, Synthesis and Characterization, and Applications.
Download or read book Advanced Materials for Defense written by Raul Fangueiro and published by Springer Nature. This book was released on 2020-01-02 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of high quality research and review papers submitted to the 1st World Conference on Advanced Materials for Defense (AUXDEFENSE 2018). A wide range of topics related to the defense area such as ballistic protection, impact and energy absorption, composite materials, smart materials and structures, nanomaterials and nano structures, CBRN protection, thermoregulation, camouflage, auxetic materials, and monitoring systems is covered. Written by the leading experts in these subjects, this work discusses both technological advances in terms of materials as well as product designing, analysis as well as case studies. This volume will prove to be a valuable resource for researchers and scientists from different engineering disciplines such as materials science, chemical engineering, biological sciences, textile engineering, mechanical engineering, environmental science, and nanotechnology.
Download or read book Program and the Book of Abstracts Tenth Young Researchers Conference Materials Science and Engineering December 21 23 2011 Belgrade Serbia written by Nenad Ignjatović and published by Institute of Technical Sciences of SASA. This book was released on 2011-12-20 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Young Researchers' meetings are held annually late in December since 2002 and they are organized by the Materials Research Society of Serbia. Originally conceived as seminars, since 2007 these meetings were transformed into conferences. The previous ten meetings featured presentations based on the research of various young scientists from Serbia, Bosnia and Herzegovina, Montenegro, Slovenia, Brazil, Germany, United States of America, China, Poland, Belgium, Spain, Romania, United Kingdom, Austria, Italy, Hungary, Russia, Canada, etc. At the Conference, young researchers, students of doctoral, master and undergraduate studies, are given the opportunity to make an overview of their research into materials science and engineering through oral and poster presentations. As for the scientific content of the conference, we have given full priority to research topics that are currently considered as being on the frontier of the field. Nanotechnology and Advanced Materials, Synthesis and Engineering of Biomaterials, Application of Biomaterials, Theoretical Modeling of Materials and Advanced Methods for Synthesis and Processing present only some of those exciting topics that will be given the central stage and most attention during this meeting. The conference is free of charge and the participants are invited to submit their papers to the journals Tehnika – Novi Materijali and Hemijska Industrija. The Tenth Young Researchers' Conference Materials Science and Engineering was held in Belgrade, Serbia on December 21-23, 2011. It was organized by the Materials Research Society of Serbia and Institute of Technical Sciences of the Serbian Academy of Sciences and Arts.
Download or read book Heterostructured Materials written by Xiaolei Wu and published by CRC Press. This book was released on 2021-11-24 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterostructured (HS) materials represent an emerging class of materials that are expected to become a major research field for the communities of materials, mechanics, and physics in the next couple of decades. One of the biggest advantages of HS materials is that they can be produced by large-scale industrial facilities and technologies and therefore can be commercialized without the scaling up and high-cost barriers that are often encountered by other advanced materials. This book collects recent papers on the progress in the field of HS materials, especially their fundamental physics. The papers are arranged in a sequence of chapters that will help new researchers entering the field to have a quick and comprehensive understanding of HS materials, including the fundamentals and recent progress in their processing, characterization, and properties.