Download or read book Production of Ultra Fine Grains and Evolution of Grain Boundaries During Severe Plastic Deformation of Aluminum and Its Alloys written by Douglas L. Swisher and published by . This book was released on 2000-12-01 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equal channel-angular pressing (ECAP) is a recently developed method for deformation processing of material that can produce an ultra-fine grain structure in bulk material through severe plastic deformation. This study will present results on micro structural evolution during repetitive ECAP of pure aluminum. The principal method of data collection was Orientation Imaging Microscopy (OIM). The results of the study indicate that, after one ECAP pass, the structure is inhomogeneous and anisotropic, and consists mostly of deformation-induced features. After repetitive ECAP, the aluminum material exhibited a homogeneous grain size but retained an anisotropic character to the microstructure. After twelve ECAP passes the microstructure consisted mainly of fine grains surrounded by high-angle boundaries but an appreciable fraction of low-angle boundaries remained. This microstructure thus comprises a mixture of deformation-induced and recrystallization features. Further results were also obtained documenting the existence of deformation banding in this material as well as in a rolled aluminum alloy. This phenomenon may be general in nature and associated with severe plastic deformation in aluminum and its alloys.
Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.
Download or read book Severe Plastic Deformation written by Burhanettin Altan and published by Nova Publishers. This book was released on 2006 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been already well established that the nanostructured materials (materials with a grain size of 100mm or less) is the future materials. Nanostructured materials possess properties superior to those of conventional, coarse grained materials. Hence designing potentially cost efficient and environmentally friendly products with better performance is a possibility. Among others, nanostructured materials exhibit increased strength, hardness and ductility and provide an opportunity for superplastic forming. When all the procedures in use for the production of nanostructured materials are examined, only severe plastic deformation (SPD) processes exhibit a potential for producing relatively large samples suitable for industrial applications. In this monograph, the state-of-the-art on severe plastic deformation methods is presented in one volume. The monograph is organised into eight chapters, each of which contains papers on different aspect of severe plastic deformation methods prepared by the experts in this field. The topics covered in the monograph are structure formation, phase transformation, superplasticity, mechanical properties of nanostructured materials, electronic and magnetic properties of nanostructured materials, deformation analysis, novel SPD methods, commercialisation of ECAE method.
Download or read book Advanced Mechanical Properties and Deformation Mechanisms of Bulk Nanostructured Materials written by Yong Hao Zhao and published by Trans Tech Publications Ltd. This book was released on 2011-05-17 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only
Download or read book Severe Plastic Deformation Techniques written by Marcello Cabibbo and published by BoD – Books on Demand. This book was released on 2017-08-09 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain size is recognized as a key microstructural factor affecting mechanical and, to some extent, physical properties of metals and metallic materials. For this reason, all the means designed to control and modify the grain size are considered a proper way to design and tailor metallic materials with desired properties. In this sense, microstructure refinement through severe plastic deformation (SPD) techniques can be considered a key method for this purpose. A typical SPD process is currently defined as any method of metal forming under extensive hydrostatic pressure intended to impose a very high strain on a bulk solid without involving any significant change in the overall dimensions and having the ability to produce exceptional grain refinement. What makes SPD processing techniques so popular and attractive is the possibility of using them to enhance the strength behavior of conventional metallic materials by a factor of up to eight for pure metals such as copper and by some 30-50% for alloys. Despite the impressive property improvement achievable with SPD techniques, their uptake by industry has been rather sluggish. This book intends to give a panorama of the typical SPD techniques intended to optimize the mechanical and physical properties of metals through a significant grain size reduction process. Modeling for this purpose is also presented.
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Aluminium Alloys written by Jürgen Hirsch and published by John Wiley & Sons. This book was released on 2008-11-17 with total page 2580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is a well established modern lightweight engineering and functional material with a unique combination of specific properties like strengh, formability, durability, conductivity, corrosion resistance, etc. It is present in many intelligent solutions in established markets like building, transport, packaging, printing, and many others, in our fast moving modern society. The various aluminium alloys can be processed quite efficiently in large quantities by conventional fabrication routes, as well as in special sophisticated forms and material combinations for highly innovative high–tec solutions and applications. This book contains latest information about all these aspects in form of the refereed papers of the II th International Conference on Aluminium Alloys "ICAA", where world–wide experts from academia and engineers from industry present latest results and new ideas in fundamental as well as applied research. Since 22 years the ICAA series provides scientists and engineers with a complete overview over the latest scientific and technological developments, featuring profound technology–based overviews and new innovative perspectives. This book is a reference for the scientific community as well as for the aluminium industry working on aluminium alloy development, processing and application issues. It gives a global perspective on the current focus of international research with emphasis on in–depth understanding of specific properties and applications of conventional and advanced aluminium alloys.
Download or read book Magnesium Technology 2013 written by Norbert Hort and published by Springer. This book was released on 2016-12-09 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this volume is based, is one of the largest yearly gatherings of magnesium experts in the world. Papers reflect all aspects of the field including primary production to applications, recycling, basic research findings, and industrialization. Readers will find broad coverage of current topics, including alloys and their properties, cast products and processing, wrought products and processing, corrosion and surface finishing, ecology, and more. New and emerging applications in such areas as hydrogen storage are also examined.
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries. Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace. With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys
Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.
Download or read book Magnesium Technology 2011 written by Wim Sillekens and published by Springer. This book was released on 2016-12-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Materials Transactions written by and published by . This book was released on 2009 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agile Manufacturing Systems written by K Hans Raj and published by ALPHA SCIENCE INTERNATIONAL LIMITED. This book was released on 2011-12-17 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agility has become very important for the industries today as the lifetimes of the products are continuously shrinking. This book provides an excellent opportunity for updating understanding of agile methods from the design, manufacturing and business process perspectives, whether one is an industrial practitioner, academic researcher engineer or business graduate student. This volume is a compilation of various important aspects of agility consisting of systemic considerations in manufacturing, agile software systems, agile business systems, agile operations research, flexible manufacturing systems, advanced manufacturing systems with improved materials and mechanical behavior of products, agile aspects of design, clean and green manufacturing systems, environment, agile defence systems.
Download or read book Superplasticity and Grain Boundaries in Ultrafine Grained Materials written by Alexander P. Zhilyaev and published by Academic Press. This book was released on 2020-11-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity and Grain Boundaries in Ultrafine-Grained Materials, Second Edition, provides cutting-edge modeling solutions surrounding the role of grain boundaries in processes such as grain boundary diffusion, relaxation and grain growth. In addition, the book's authors explore the formation and evolution of the microstructure, texture and ensembles of grain boundaries in materials produced by severe plastic deformation. This updated edition, written by leading experts in the field, has been revised to include new chapters on the basics of nanostructure processing, the influence of deformation mechanisms on grain refinement, processing techniques for ultrafine-grained and nanostructured materials, and much more. Provides practical applications and methods for the proper implementation of models, allowing for more effective complex metal forming processes Features new chapters on the microstructure, mechanical behavior and functional properties of HCP metals, processing ultrafine-grained and nanostructured materials, and more Covers experimental assessment and computational modeling techniques for adiabatic heating and saturation of grain refinement during SPD of metals and alloys
Download or read book THERMEC 2021 written by Mihail Ionescu and published by Trans Tech Publications Ltd. This book was released on 2021-01-05 with total page 1937 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications Selected, peer-reviewed papers from the International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC 2021), May 10-14, 2021, Vienna, Austria
