Download or read book Product Warnings Instructions and User Information written by and published by . This book was released on 1994 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Influence of Consumer Product Manual Warnings and On Product Warnings on Information Retrieval and Behavioral Compliance written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Product warnings are commonly found in owners manuals. A problem with only placing warnings in a product manual is that some users will not read them or remember the material later. Because of the importance in communicating warnings, alternative methods of information presentation must be investigated. There is limited research comparing the presentation of warning information on a product, versus in the manual, versus having the information in both places. This is the first study that specifically investigates the potential utility of having an on-product warning serve as a primary and/or secondary warning. For the present study, participants installed a memory chip into the central processing unit (CPU) of a computer. The independent variables (IVs) were the time of exposure to the product manual and the presence or absence of an on-product warning label. The effects on behavioral compliance and information retrieval performance were investigated. It was hypothesized that individuals that are exposed to the manual for a shorter period of time (25 seconds) and asked to perform the installation task with the warning label present would demonstrate the on-product warnings utility as a primary warning. Individuals exposed to the manual for a longer period of time (5 minutes) and who are exposed to the on-product warning would be expected to show the on-product warnings ability to serve as a secondary warning. The results showed a significant interaction for manual-exposure time and warning-label state, with the possible exception of the shorter manual-exposure, no label condition. The present study found higher levels of behavioral compliance in label conditions, but similar levels of compliance were also found in the longer manual-exposure condition without the label. The results demonstrated that the on-product warning label was useful as a primary warning. A comparison of the mean compliance levels between the longer manual-exposure, label condition and the longer.
Download or read book Writing and Designing Manuals and Warnings 4e written by Patricia A. Robinson and published by CRC Press. This book was released on 2009-06-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty-five years ago, how many people were thinking about the internet on a daily basis? Now you can find everything, including technical and instruction manuals, online. But some things never change. Users still need instructions and warnings to guide them in the safe and proper use of products. Good design, clear instructions and warnings, place
Download or read book The Combination Products Handbook written by Susan Neadle and published by CRC Press. This book was released on 2023-05-16 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combination products are therapeutic and diagnostic products that combine drugs, devices, and/or biological products. According to the US Food and Drug Administration (FDA), “a combination product is one composed of any combination of a drug and a device; a biological product and a device; a drug and a biological product; or a drug, device and a biological product.” Examples include prefilled syringes, pen injectors, autoinjectors, inhalers, transdermal delivery systems, drug-eluting stents, and kits containing drug administration devices co-packaged with drugs and/or biological products. This handbook provides the most up-to-date information on the development of combination products, from the technology involved to successful delivery to market. The authors present important and up-to-the-minute pre- and post-market reviews of international combination product regulations, guidance, considerations, and best practices. This handbook: Brings clarity of understanding for global combination products guidance and regulations Reviews the current state-of-the-art considerations and best practices spanning the combination product lifecycle, pre-market through post-market Reviews medical product classification and assignment issues faced by global regulatory authorities and industry The editor is a recognized international Combination Products and Medical Device expert with over 35 years of industry experience and has an outstanding team of contributors. Endorsed by AAMI – Association for the Advancement of Medical Instrumentation.
Download or read book Safety and Health for Engineers written by Roger L. Brauer and published by John Wiley & Sons. This book was released on 2022-08-18 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAFETY AND HEALTH FOR ENGINEERS A comprehensive resource for making products, facilities, processes, and operations safe for workers, users, and the public Ensuring the health and safety of individuals in the workplace is vital on an interpersonal level but is also crucial to limiting the liability of companies in the event of an onsite injury. The Bureau of Labor Statistics reported over 4,700 fatal work injuries in the United States in 2020, most frequently in transportation-related incidents. The same year, approximately 2.7 million workplace injuries and illnesses were reported by private industry employers. According to the National Safety Council, the cost in lost wages, productivity, medical and administrative costs is close to 1.2 trillion dollars in the US alone. It is imperative—by law and ethics—for engineers and safety and health professionals to drive down these statistics by creating a safe workplace and safe products, as well as maintaining a safe environment. Safety and Health for Engineers is considered the gold standard for engineers in all specialties, teaching an understanding of many components necessary to achieve safe workplaces, products, facilities, and methods to secure safety for workers, users, and the public. Each chapter offers information relevant to help safety professionals and engineers in the achievement of the first canon of professional ethics: to protect the health, safety, and welfare of the public. The textbook examines the fundamentals of safety, legal aspects, hazard recognition and control, the human element, and techniques to manage safety decisions. In doing so, it covers the primary safety essentials necessary for certification examinations for practitioners. Readers of the fourth edition of Safety and Health for Engineers readers will also find: Updates to all chapters, informed by research and references gathered since the last publication The most up-to-date information on current policy, certifications, regulations, agency standards, and the impact of new technologies, such as wearable technology, automation in transportation, and artificial intelligence New international information, including U.S. and foreign standards agencies, professional societies, and other organizations worldwide Expanded sections with real-world applications, exercises, and 164 case studies An extensive list of references to help readers find more detail on chapter contents A solution manual available to qualified instructors Safety and Health for Engineers is an ideal textbook for courses in safety engineering around the world in undergraduate or graduate studies, or in professional development learning. It also is a useful reference for professionals in engineering, safety, health, and associated fields who are preparing for credentialing examinations in safety and health.
Download or read book Product Liability Act written by United States. Congress. Senate. Committee on Commerce, Science, and Transportation. Subcommittee for Consumers and published by . This book was released on 1984 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Liability written by and published by . This book was released on 1989 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Forklift Manual written by John L. Ryan and published by Donegal Bay Inc. Publishing. This book was released on 2006 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Products Liability Law written by Mark Geistfeld and published by Aspen Publishing. This book was released on 2021-10-07 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Products Liability Law, Second Edition, by prolific tort scholar Mark Geistfeld, represents the “next generation” of casebooks on products liability. Earlier texts focused on the relative merits of strict liability and negligence, embodied in the apparently competing liability frameworks of the consumer expectations test in the Restatement (Second) of Torts and the risk-utility test in the Restatement (Third) of Torts. The majority of courts, however, have incorporated the risk-utility test into the framework of consumer expectations. By providing balanced coverage of both consumer expectations and the risk-utility test, the casebook keeps pace with ongoing developments in the case law and moves beyond the battles that largely defined products liability in the twentieth century. In addition to teaching students how liability rules protect consumer expectations via comprehensive application of the risk-utility test, this innovative casebook underscores the importance of doctrinal history, the psychology of evaluating product risks, and the role of products liability in the modern regulatory state. Students will learn how courts have applied established doctrines to novel problems ranging from the relevance of scientific evidence in toxic-tort cases to the distribution of defective products on the Amazon online marketplace. To further illustrate this dynamic, the casebook has twenty-nine problems with associated analysis involving the liability issues likely to be raised by the emerging technology of autonomous vehicles. Finally, the casebook reinforces students’ knowledge of fundamental tort principles while developing specialized expertise and a deeper understanding of the torts process. New to the Second Edition: A dozen new main cases updating older case law, providing coverage of new issues not addressed in the First Edition, and/or improving upon the analysis provided by the associated case in the First Edition Retention of the majority of main cases from the first edition, with revisions to the ensuing notes incorporating relevant case law developments A reorganized and updated chapter covering the controversy over the relative merits of the consumer expectations and risk-utility tests Comprehensive discussion of the tort version of the implied warranty—the genesis of the consumer expectations test—and its relation to product malfunctions and the risk-utility test A new chapter addressing the existence of the tort duty and identifying the difference between patent dangers and patent defects Reorganization of the chapter on factual causation, emphasizing the continuity of evidentiary problems running across different types of cases, ranging from the heeding presumption in warning cases, to market-share liability, to proof of both general and specific causation in toxic-tort cases Professors and students will benefit from: Classroom-tested materials taught for over 20 years by an award-winning professor Interesting cases that illustrate both the traditional and contemporary character of products liability litigation; cases are followed by extensive notes Each chapter addressing doctrinal issues concludes with problems on autonomous vehicles. The full set of 29 problems provides students with the necessary background for understanding liability issues posed by this emerging technology. Each problem is followed by the author’s analysis of the associated issues, cross-referenced to the relevant casebook material.
Download or read book Engineering Psychology and Human Performance written by Christopher D. Wickens and published by Routledge. This book was released on 2021-09-27 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forming connections between human performance and design, this new edition of Engineering Psychology and Human Performance examines human–machine interaction. The book is organized directly from a psychological perspective of human information processing, and chapters correspond to the flow of information as it is processed by a human being—from the senses, through the brain, to action—rather than from the perspective of system components or engineering design concepts. Upon completing this book, readers will be able to identify how human ability contributes to the design of technology; understand the connections within human information processing and human performance; challenge the way they think about technology’s influence on human performance; and show how theoretical advances have been, or might be, applied to improving human–machine interactions. This new edition includes the following key features: A new chapter on research methods Sections on interruption management and distracted driving as cogent examples of applications of engineering psychology theory to societal problems A greatly increased number of references to pandemics, technostress, and misinformation New applications Amplified emphasis on readability and commonsense examples Updated and new references throughout the text This book is ideal for psychology and engineering students, as well as practitioners in engineering psychology, human performance, and human factors. The text is also supplemented by online resources for students and instructors.
Download or read book Standardizing Medication Labels written by Institute of Medicine and published by National Academies Press. This book was released on 2008-05-15 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medications are an important component of health care, but each year their misuse results in over a million adverse drug events that lead to office and emergency room visits as well as hospitalizations and, in some cases, death. As a patient's most tangible source of information about what drug has been prescribed and how that drug is to be taken, the label on a container of prescription medication is a crucial line of defense against such medication safety problems, yet almost half of all patients misunderstand label instructions about how to take their medicines. Standardizing Medication Labels: Confusing Patients Less is the summary of a workshop, held in Washington, D.C. on October 12, 2007, that was organized to examine what is known about how medication container labeling affects patient safety and to discuss approaches to addressing identified problems.
Download or read book Technical Manual written by United States Department of the Army and published by . This book was released on 1983 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Investigator Principles and Practice to NFPA 921 and 1033 written by International Association of Fire Chiefs and published by Jones & Bartlett Learning. This book was released on 2017-12-20 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire Investigator: Principles and Practice to NFPA 921 and 1033, Fifth Edition is the premier resource for current and future Fire Investigators. Written by talented professional fire investigators from the International Association of Arson Investigators (IAAI), this text covers the entire span of the 2017 Edition of NFPA 921, Guide for Fire and Explosion Investigations and addresses all of the job performance requirements in the 2014 Edition of NFPA 1033, Standard for Professional Qualifications for Fire Investigator. This text is the benchmark for conducting safe and systematic investigations.
Download or read book Product Manual Safety Warnings written by William J. Vigilante and published by . This book was released on 1997 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fair Weather written by National Research Council and published by National Academies Press. This book was released on 2003-06-14 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decades of evolving U.S. policy have led to three sectors providing weather servicesâ€"NOAA (primarily the National Weather Service [NWS]), academic institutions, and private companies. This three-sector system has produced a scope and diversity of weather services in the United States second to none. However, rapid scientific and technological change is changing the capabilities of the sectors and creating occasional friction. Fair Weather: Effective Partnerships in Weather and Climate Services examines the roles of the three sectors in providing weather and climate services, the barriers to interaction among the sectors, and the impact of scientific and technological advances on the weather enterprise. Readers from all three sectors will be interested in the analysis and recommendations provided in Fair Weather.
Download or read book Shapo on the Law of Products Liability written by Marshall S. Shapo and published by Wolters Kluwer. This book was released on 2012-10-22 with total page 3484 pages. Available in PDF, EPUB and Kindle. Book excerpt: A proliferation of lawsuits involving sport utility vehicles, defective tires, medical devices and drugs, and asbestos abounds. Public attention to products liability cases is at an all-time high, and awards routinely run into the millions of dollars. When developing a strategy in this high stakes world, attorneys can't afford to have anything other than the best information and insight into this evolving area of law. Lawyers need practical tools to assess a products liability case's potential and build their approach, and Shapo on the Law of Products Liability provides the tools to give you the winning edge. Through a holistic analysis of the law and its principal developments as witnessed in hundreds of cases, this treatise gives litigators a wide variety of perspectives on potential strategies, and the tools to support those strategies with persuasive arguments. This authoritative two-volume work will enable you to: Assess products liability case potential and build sound litigation strategies Dig deep into products liability law to build creative approaches to litigation Craft a winning case and reap the greatest reward for your clients Find the tools and information to support strategies with persuasive arguments Both federal and state courts contribute a rich mix of decisions to products liability law, which covers both consumer products and occupational hazards. This indispensable resource for the products liability practitioner helps you prepare your case. Is the product defective? Who is liable? What is the manufacturer's responsibility? Who can be sued? What kind of awards may be realized? How might this be defended? Shapo on the Law of Products Liability also includes coverage of: Asbestos litigation Chinese drywall Food and drug Medical devices Design/manufacturing defects claims Punitive damages Discovery rule Up to date analysis and commentary History and background on products liability law Damages Advertising material Packaging Marshall S. Shapo, the Frederic P. Vose Professor at Northwestern University School of Law, is a nationally recognized authority on torts and products liability law.
Download or read book Unveiling the Secrets of Good Manufacturing Practices written by Dr. Akash Sharma, Vriti Gamta, Gaurav Luthra and published by Notion Press. This book was released on 2023-09-13 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Unveiling the Secrets of Good Manufacturing Practices: Building Excellence in Healthcare Manufacturing" is a comprehensive guide that unlocks the secrets to achieving manufacturing excellence through the implementation of Good Manufacturing Practices (GMP). This book provides valuable insights and practical strategies for navigating the complexities of GMP, ensuring product quality, regulatory compliance, and customer satisfaction. From facility design and documentation control to supplier management, process validation, and continuous improvement, each chapter explores key principles, real-world case studies, and best practices. Whether you're a quality manager, production supervisor, or involved in GMP compliance, this book equips you with the knowledge and tools to build a culture of excellence in manufacturing. Unveil the secrets of GMP and elevate your manufacturing operations to new heights of success.
