Download or read book Processing of Nanoparticle Materials and Nanostructured Films written by Kathy Lu and published by John Wiley & Sons. This book was released on 2010-10-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been extraordinary developments in nanomaterials in the past two decades. Nanomaterial processing is one of the key components for this success. This volume, titled Processing of Nanoparticle Materials and Nanostructured Films, is a collection of the papers presented at Controlled Processing of Nanoparticle-based Materials and Nanostructured Films symposium held during the Materials Science and Technology 2009 conference (MS&T’09), October 25-29, 2009 in Pittsburgh, PA. It summarizes the progress that has been achieved most recently in understanding and processing nanoparticle-based materials and nanostructured films. Nanoparticle-based materials and nanostructured films hold great promise to enable a broad range of new applications. This includes high energy conversion efficiency fuel cells, smart materials, high performance sensors, and structural materials under extreme environments. However, many barriers still exist in understanding and controlling the processing of nanoparticle-based materials and nanostructured films. In particular, agglomeration must be controlled in powder synthesis and processing to enable the fabrication of homogeneous green or composite microstructures, and microstructure evolution must be controlled to preserve the size and properties of the nanostructures in the finished materials. Also, novel nanostructure designs are highly needed at all stages of bulk and thin film nanomaterial formation process to enable unique performances, low cost, and green engineering. This volume focuses on three general topics, 1) Processing to preserve and improve nanoscale size, structure, and properties, 2) Novel design and understanding of new nanomaterials, such as new synthesis approaches, templating, and 3D assembly technologies, and 3) Applications of nanoparticle assemblies and composites and thin films.

Download or read book Nanoparticles and Nanostructured Films written by Janos H. Fendler and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this concise handbook leading experts give a broad overview of the latest developments in this emerging and fascinating field of nano-sized materials. Coverage includes new techniques for the synthesis of nanoparticles as well as an in-depth treatment of their characterization and chemical and physical properties. The future applications of these advanced materials are also discussed. The wealth of information included makes this an invaluable guide for graduate students as well as scientists in materials science, chemistry or physics - looking for a comprehensive treatment of the topic.

Download or read book Advances in Nanomaterials and Nanostructures written by Kathy Lu and published by John Wiley & Sons. This book was released on 2011-10-05 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 17 papers from the Controlled Processing of Nanoparticle-based Materials and Nanostructured Films; Nanotechnology for Energy, Healthcare, and Industry; and Nanolaminated Ternary Carbides and Nitrides (MAX Phases) symposia held during the 2010 Materials Science and Technology (MS&T'10) meeting, October 17-21, 2010, Houston, Texas. Topics include: Direct Manufacturing; Low Dimension Nanomaterials; Processing and Sintering; Thin Films; Nanolaminated Ternary Carbides and Nitrides (MAX Phases); and Novel Nanomaterial Approaches.

Download or read book Nanoscale Processing written by Sabu Thomas and published by Elsevier. This book was released on 2020-10-22 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Processing outlines recent advances in processing techniques for a range of nanomaterial types. New developments in the processing of nanostructured materials are being applied in diverse fields. This book offers in-depth information and analysis of a range of processing techniques for nanostructures, and also covers nanocharacterization aspects thoroughly. Topics covered include zero dimensional nanostructures, nanostructured biomaterials, carbon-based nanostructures, polymeric and liposomal nanostructures, and quantum dots. This book is an important resource for materials scientists and engineers looking to learn more about a variety of processing techniques for various nanomaterial classes, for use in both the industrial and biomedical sectors. - Explains major nanoscale processing techniques, outlining in which situations each should be used - Discuses a range of nanomaterial classes, including nanobiomaterials, polymeric nanomaterials, optical nanomaterials and magnetic nanomaterials - Explores the challenges of using certain processing techniques for certain classes of nanomaterial

Download or read book Nanostructured Materials written by Gan-Moog Chow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: A critical, up to date, tutorial review and discussion of the science and technology of nanostructured metallic and ceramic materials. The focus is on the synthesis and processing of nanoparticles, the assembly and stability of nanostructures, characterization and properties, and applications. There is a growing interest in the processing of nanoparticles into consolidated bulk materials and coatings. The metastability of nanoparticles may lead to undesirable grain growth during thermally assisted consolidation or other processing routes, and the retention of nanostructures in a processed part or component continues to attract a great deal of attention. Current activity is concentrating on the deposition of nanostructured coatings using established thermal spray technology and wet chemistry methods. Naturally existing or artificially synthesized templates with unique structures and morphologies have been used to fabricate nanostructured materials with the same structural and morphological characteristics as the templates. Recent advances in characterization techniques have provided information on the structure, the surface and bulk chemistry of nanoparticles, and the structures and chemistry of exposed and buried surfaces of coatings. Contributors are drawn from Canada, France, UK, USA, Belarus, Russia and Ukraine.

Download or read book Nanomaterials written by S. C. Singh and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first in-depth treatment of the synthesis, processing, and characterization of nanomaterials using lasers, ranging from fundamentals to the latest research results, this handy reference is divided into two main sections. After introducing the concepts of lasers, nanomaterials, nanoarchitectures and laser-material interactions in the first three chapters, the book goes on to discuss the synthesis of various nanomaterials in vacuum, gas and liquids. The second half discusses various nanomaterial characterization techniques involving lasers, from Raman and photoluminescence spectroscopies to light dynamic scattering, laser spectroscopy and such unusual techniques as laser photo acoustic, fluorescence correlation spectroscopy, ultrafast dynamics and laser-induced thermal pulses. The specialist authors adopt a practical approach throughout, with an emphasis on experiments, set-up, and results. Each chapter begins with an introduction and is uniform in covering the basic approaches, experimental setups, and dependencies of the particular method on different parameters, providing sufficient theory and modeling to understand the principles behind the techniques.

Download or read book Nanostructured Materials and Systems written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2010-09-21 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on Nanostructured Materials and Systems was held during the 8th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 8) from May 31-June 5, 2009 in Vancouver, Canada. This symposium aimed to review the progress in the state-of-the-art of nanoscience and nanotechnology including synthesis, processing, modeling, applications and assessment of toxicological potential of nanomatter. More than 55 contributions (invited talks, oral presentations, and posters), were presented by participants, from all over the world, representing universities, research institutions, and industry which made this symposium an attractive forum for interdisciplinary presentations and discussions and to elaborate their functional diversity. This issue contains 16 peer-reviewed papers (invited and contributed) incorporating the latest developments related to synthesis, processing and manufacturing technologies of nanoscaled materials and systems including one-dimensional nanostructures, nanoparticle-based composites, electrospinning of nanofibers, functional thin films, ceramic membranes, bioactive materials and self-assembled functional nanostructures and nanodevices. These papers discuss several important aspects related to fabrication and engineering issues necessary for understanding and further development of processing and manufacturing of nanostructured materials and systems.

Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.

Download or read book Nanostructured Materials and Systems written by Sanjay Mathur and published by Wiley-American Ceramic Society. This book was released on 2010-07-13 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on Nanostructured Materials and Systems was held during the 8th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 8) from May 31-June 5, 2009 in Vancouver, Canada. This symposium aimed to review the progress in the state-of-the-art of nanoscience and nanotechnology including synthesis, processing, modeling, applications and assessment of toxicological potential of nanomatter. More than 55 contributions (invited talks, oral presentations, and posters), were presented by participants, from all over the world, representing universities, research institutions, and industry which made this symposium an attractive forum for interdisciplinary presentations and discussions and to elaborate their functional diversity. This issue contains 16 peer-reviewed papers (invited and contributed) incorporating the latest developments related to synthesis, processing and manufacturing technologies of nanoscaled materials and systems including one-dimensional nanostructures, nanoparticle-based composites, electrospinning of nanofibers, functional thin films, ceramic membranes, bioactive materials and self-assembled functional nanostructures and nanodevices. These papers discuss several important aspects related to fabrication and engineering issues necessary for understanding and further development of processing and manufacturing of nanostructured materials and systems.

Download or read book Nanostructured Materials for Engineering Applications written by Carlos P. Bergmann and published by Springer Science & Business Media. This book was released on 2011-08-28 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an introduction to nanostructured materials and guides the reader through their different engineering applications. It addresses the special phenomena and potentials involved in the applications without going into too much scientific detail of the physics and chemistry involved, which makes the reading interesting for beginners in the field. Materials for different applications in engineering are described, such as those used in opto-electronics, energy, tribology, bio-applications, catalysis, reinforcement and many more. In each application chapter, the reader will learn about the phenomena involved in the application, the nanostructured materials used in the field and their processing, besides finding some practical examples of their use in laboratories and in industry.The clear language and the application-oriented perspective of the book makes it suitable for both engineers and students who want to learn about applications of nanostructured materials in Engineering.

Download or read book Plasma Processing of Nanomaterials written by R. Mohan Sankaran and published by CRC Press. This book was released on 2017-12-19 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are at a critical evolutionary juncture in the research and development of low-temperature plasmas, which have become essential to synthesizing and processing vital nanoscale materials. More and more industries are increasingly dependent on plasma technology to develop integrated small-scale devices, but physical limits to growth, and other challenges, threaten progress. Plasma Processing of Nanomaterials is an in-depth guide to the art and science of plasma-based chemical processes used to synthesize, process, and modify various classes of nanoscale materials such as nanoparticles, carbon nanotubes, and semiconductor nanowires. Plasma technology enables a wide range of academic and industrial applications in fields including electronics, textiles, automotives, aerospace, and biomedical. A prime example is the semiconductor industry, in which engineers revolutionized microelectronics by using plasmas to deposit and etch thin films and fabricate integrated circuits. An overview of progress and future potential in plasma processing, this reference illustrates key experimental and theoretical aspects by presenting practical examples of: Nanoscale etching/deposition of thin films Catalytic growth of carbon nanotubes and semiconductor nanowires Silicon nanoparticle synthesis Functionalization of carbon nanotubes Self-organized nanostructures Significant advances are expected in nanoelectronics, photovoltaics, and other emerging fields as plasma technology is further optimized to improve the implementation of nanomaterials with well-defined size, shape, and composition. Moving away from the usual focus on wet techniques embraced in chemistry and physics, the author sheds light on pivotal breakthroughs being made by the smaller plasma community. Written for a diverse audience working in fields ranging from nanoelectronics and energy sensors to catalysis and nanomedicine, this resource will help readers improve development and application of nanomaterials in their own work. About the Author: R. Mohan Sankaran received the American Vacuum Society’s 2011 Peter Mark Memorial Award for his outstanding contributions to tandem plasma synthesis.

Download or read book Materials Processing for Production of Nanostructured Thin Films written by Keith J. Stine and published by MDPI. This book was released on 2021-09-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin films are important in many of the technologies used every day, impacting major markets for energy, medicine, and coatings. Scientists and engineers have been producing thin films on a wide range of surfaces for many decades but now have begun to explore giving these films new and controlled structures at the nanometer scale. These efforts are part of the new horizons opened by the field of nanoscience and impart novel structures and properties to these thin films. This book covers some of the methods for making these nanostructured thin films and their applications in areas impacting on health and energy usage.

Download or read book Synthesis and Modification of Nanostructured Thin Films written by Ion N. Mihailescu and published by MDPI. This book was released on 2020-03-17 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue “Synthesis and Modification of Nanostructured Thin Films” highlights the recent progress in thin film synthesis/modification and characterization. New methods are reviewed for the synthesis and/or modification of thin films based on laser, magnetron, chemical, and other techniques. The obtained thin nanostructures are characterized by complex and complementary techniques. We think that most of proposed methods can be directly applied in production, but some others still need further elaboration for long-term prospective applications in lasers, optics, materials, electronics, informatics, telecommunications, biology, medicine, and probably many other domains. The Guest Editor and the MDPI staff are therefore pleased to offer this Special Issue to interested readers, including graduate and PhD students as well as postdoctoral researchers, but also to the entire community interested in the field of nanomaterials. We share the conviction that this can serve as a useful tool for updating the literature, but also to aid in the conception of new production and/or research programs. There is plenty of room for further dedicated R&D advances based on new instruments and materials under development.

Download or read book Advances in Synthesis Processing and Applications of Nanostructures written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-10-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributed papers from the 2011 Materials Science and Technology symposia, this is a useful one-stop resource for understanding the most important issues in advances in the synthesis, processing, and applications of nanostructures. Logically organized and carefully selected, the articles cover the themes of the symposia: Nanotechnology for Energy, Healthcare and Industry; Controlled Synthesis Processing and Applications of Structural and Functional Nanomaterials; and Synthesis, Properties, and Applications of Noble Metal Nanostructures. A must for academics in mechanical and chemical engineering, materials and or ceramics, and chemistry.

Download or read book Nanostructures and Nanomaterials written by Guozhong Cao and published by World Scientific. This book was released on 2011 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text focuses on the synthesis, properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides coverage of the fundamentals and processing techniques with regard to synthesis, properties, characterization and applications of nanostructures and nanomaterials.

Download or read book Polymer Films with Embedded Metal Nanoparticles written by Andreas Heilmann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an overview of nanostructure determination and ways to find relationships to the electronic and optical properties. The methods described can be applied to a large number of other granular metal-insulator systems and used as a guideline for characterisation and modelling. In addition, the book describes the manufacture of artificially structured nanomaterials using laser or electron-beam irradiation.

Download or read book Nanostructures Nanomaterials written by Guozhong Cao and published by Imperial College Press. This book was released on 2004 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book focuses on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.