Download or read book Rare Metal Technology 2018 written by Hojong Kim and published by Springer. This book was released on 2018-01-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Topics include the extraction and processing of elements such as antimony, arsenic, gold, indium, palladium, platinum, rare earth metals including yttrium and neodymium, titanium, tungsten, and vanadium. Rare processing techniques are covered, including direct extraction processes for rare-earth recovery, biosorption of precious metals, fluorination behavior of uranium and zirconium mixture of fuel debris treatment, and recovery of valuable components of commodity metals such as zinc, nickel, and metals from slag.
Download or read book Hydrometallurgy 94 written by Institution of Mining & Metallurgy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrometallurgy '94 contains the 78 papers that were presented at the international symposium organized by the Institution of Mining and Metallurgy and the Society of Chemical Industry and held in Cambridge, England, in July 1994. In the papers specific attention is paid to the concept of sustainable development and the associated ideas of cleaner technology, recycling and waste minimization that have particular relevance to the extractiona nd processing of metals and other mineral products. The papers, by authors from 30 contries, are grouped under the headings: Hydrometallurgy and Sustainable Development; Materials Production and the Environment; Fundamentals; Leaching; Bioprocessing; Gold Solution Purification; Effluent Treatment; Processes; and Recycling.
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Resource Recovery and Recycling from Metallurgical Wastes written by S.R. Ramachandra Rao and published by Elsevier. This book was released on 2011-08-29 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource recovery and recycling from millions of tons of wastes produced from industrial activities is a continuing challenge for environmental engineers and researchers. Demand for conservation of resources, reduction in the quantity of waste and sustainable development with environmental control has been growing in every part of the world. Resource Recovery and Recycling from Metallurgical Wastes brings together the currently used techniques of waste processing and recycling, their applications with practical examples and economic potentials of the processes. Emphasis is on resource recovery by appropriate treatment and techniques. Material on the subject is scatterend in waste management and environmental related journals, conference volumes and government departmental technical reports. This work serves as a source book of information and as an educational technical reference for practicing scientists and engineers, as well as for students. - Describes the currently used and potential techniques for the recovery of valuable resources from mineral and metallurgical wastes - Discusses the applications to specific kinds of wastes with examples from current practices, as well as eht economics of the processes - Presents recent and emerging technologies of potentials in metal recycling and by-product utilization
Download or read book Advances in Mineral Processing and Hydrometallurgy written by Corby G Anderson and published by Mdpi AG. This book was released on 2021-09-23 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a Special Issue of Metals devoted to aspects of Advances in Mineral Processing and Hydrometallurgy. This includes a global call for article submissions that also included Characterization along with Recycling and Waste Minimization. As such, both primary and recycled aspects will be considered. Possible specific topics included Mineralogy, Geometallurgy, Thermodynamics, Kinetics, Comminution, Classification, Physical Separations, Liquid-Solid Separations, Leaching, Solvent Extraction, Ion Exchange, Activated Carbon, Precipitation, Reduction, Process Economics and Process Control. Suggested application areas were in Gold, Silver, PGM's, Aluminum, Copper, Zinc, Lead, Nickel, and Titanium. Critical Metals articles on topics such as Lithium, Antimony Tellurium, Gallium, Germanium, Cobalt, Graphite, Indium, and Rare Earth were also welcome. As such, this Special Issue of Metals was well supported by diverse submissions and the final publication of high-quality peer-reviewed articles.
Download or read book Rare Metal Technology 2017 written by Hojong Kim and published by Springer. This book was released on 2017-02-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Topics include the extraction and processing of elements like antimony, arsenic, gold, indium, palladium, platinum, rare earth metals including yttrium and neodymium, titanium, tungsten, and vanadium. Rare processing techniques are covered, including direct extraction processes for rare-earth recovery, biosorption of precious metals, fluorination behavior of uranium and zirconium mixture of fuel debris treatment, and recovery of valuable components of commodity metals such as zinc, nickel, and metals from slag.
Download or read book Materials Processing Fundamentals 2018 written by Guillaume Lambotte and published by Springer. This book was released on 2018-01-09 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from the Materials Processing Fundamentals Symposium held at the TMS 2018 Annual Meeting & Exhibition in Phoenix, Arizona. Covering the physical and numerical modeling of materials processing, the volume covers a range of metals and minerals. Authors present models and results related the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Download or read book Metallurgical Slags written by Nadine M. Piatak and published by Royal Society of Chemistry. This book was released on 2021-08-13 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive reference on the environmental geochemistry and resource potential of metallurgical slags
Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.
Download or read book WEEE Recycling written by Alexandre Chagnes and published by Elsevier. This book was released on 2016-07-26 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: WEEE Recycling: Research, Development, and Policies covers policies, research, development, and challenges in recycling of waste electrical and electronic equipment (WEEE). The book introduces WEEE management and then covers the environmental, economic, and societal applications of e-waste recycling, focusing on the technical challenges to designing efficient and sustainable recycling processes—including physical separation, pyrometallurgical, and hydrometallurgical processes. The development of processes for recovering strategic and critical metals from urban mining is a priority for many countries, especially those having few available ores mining. - Describes the two metallurgical processes—hydro- and pyro-metallurgy—and their application in recycling of metals - Provides a life cycle analysis in the WEEE recycling of metals - Outlines how to determine economic parameters in the recycling of waste metals - Discusses the socio economic and environmental implication of metal recycling
Download or read book Separation Processes in Hydrometallurgy written by G. A. Davies and published by . This book was released on 1987 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Cyanide Leaching of Platinum group Metals from Automobile Catalysts process Development Unit written by Robert J. Kuczynski and published by . This book was released on 1992 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2005-12-02 with total page 1077 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold processing industry is experiencing change. As free-milling and oxide ores become depleted, more complex polymetallic and refractory ores are being processed, coupled with increasing pressure for stricter environmental compliance. Recent years have also seen a steady reduction in mineral processing and metallurgy graduates and a gradual loss of older operating experience. A contribution to documenting current and future best practice in gold ore processing seems timely.The focus of this volume is on advances in current gold plant operation, from conception to closure; chapters also cover innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage. Sufficient coverage is also given to the chemistry and engineering aspects. The general principle behind the structure of the volume is that of flowsheeting based on unit operations and applied to a mineralogical classification of gold ore types. From concept to closure, this book covers all unit operations, mineralogies and processes that are relevant to dealing with today's complex orebodies.Practical experience is vital to the successful development, operation and closure of any operation. The 42 chapters have been contributed by a total of 66 authors and co-authors who are experts from countries spanning the globe, and representing exhaustive practical knowledge covering many disciplines relevant to gold processing.* Current best practice as elucidated by a select panel of experts in the field* Innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage* Mineralogical-based approach to flowsheeting
Download or read book Noble and Precious Metals written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2018-07-04 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of copper, silver, gold and platinum in jewelry as a measure of wealth is well known. This book contains 19 chapters written by international authors on other uses and applications of noble and precious metals (copper, silver, gold, platinum, palladium, iridium, osmium, rhodium, ruthenium, and rhenium). The topics covered include surface-enhanced Raman scattering, quantum dots, synthesis and properties of nanostructures, and its applications in the diverse fields such as high-tech engineering, nanotechnology, catalysis, and biomedical applications. The basis for these applications is their high-free electron concentrations combined with high-temperature stability and corrosion resistance and methods developed for synthesizing nanostructures. Recent developments in all these areas with up-to-date references are emphasized.
Download or read book Characterization of Minerals Metals and Materials 2016 written by Shadia Ikhmayies and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization is an important and fundamental step in material research before and after processing. This bookfocuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. It is a highly authoritative collection of articles written by experts from around the world. The articles center on materials characterization, extraction, processing, corrosion, welding, solidification, and method development. In addition, articles focus on clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic, magnetic, environmental, advanced and soft materials. This book will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
