Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.

Download or read book Process Structure Properties in Polymer Additive Manufacturing II written by Swee Leong Sing and published by Mdpi AG. This book was released on 2022-06-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is particularly exciting and has great potential in transformative and translational research in many fields, such as biomedicine, aerospace, and even electronics. The current methods for polymer AM include material extrusion, material jetting, vat polymerization, and powder bed fusion. In this Special Issue, state-of-the-art reviews and current research results, which focus on the process-structure-properties relationships in polymer additive manufacturing, are reported. These include, but are not limited to, assessing the effect of process parameters, post-processing, and characterization techniques.

Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by . This book was released on 2021 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM--from the processability of the feedstock to the relationship between the process-structure-properties of AM parts--has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process-structure-properties relationships in polymer additive manufacturing.

Download or read book Structure and Properties of Additive Manufactured Polymer Components written by Klaus Friedrich and published by Woodhead Publishing. This book was released on 2020-06-18 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure and Properties of Additive Manufactured Polymer Components provides a state-of-the-art review from leading experts in the field who discuss key developments that have appeared over the last decade or so regarding the use of additive manufacturing (AM) methods in the production of neat and reinforced polymeric components. A major focus is given to materials science aspects, i.e., how the quality of the polymer preforms, the parameters of the chosen AM method, and how these factors can affect the microstructure and properties of the final product. The book not only covers production technologies and the relationship between processing, microstructure and fundamental properties of the produced parts, but also gives readers ideas on the use of AM polymer parts in medicine, automotive, aerospace, tribology, electronics, and more. Focuses on industrial aspects and applications Dedicated purely to recent advances in polymer composite additive manufacturing Emphasizes processing, structure and property relationships

Download or read book High Performance Composite Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2021-12-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers advanced 3D printing processes and the latest developments in novel composite-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The rise in ecological anxieties has forced scientists and researchers from all over the world to find novel lightweight materials. Therefore, it is necessary to expand knowledge about the processing, applications, and challenges of 3D printing of composite materials to expanding the range of their application. This book presents an extensive survey on recent improvements in the research and development of additive manufacturing technologies that are used to make composite structures for various applications such as electronic, aerospace, construction, and biomedical applications. Advanced printing techniques including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting will be covered and discussed thoroughly in this book. This book also focuses the recent advances and challenges in polymer nanocomposite and introduces potential applications of these materials in various sectors.

Download or read book Polymer Processing written by Abhijit Bandyopadhyay and published by CRC Press. This book was released on 2023-10-02 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers polymer 3D printing through basics of technique and its implementation. It begins with the discussion on fundamentals of new-age printing, know-how of technology, methodology of printing, and product design perspectives. It includes aspects of CAD along with uses of Slicer software, image analysis software and MATLAB® programming in 3D printing of polymers. It covers choice of polymers for printing subject to their structure–property relationship, troubleshooting during printing, and possible uses of waste plastics and other waste materials. Key Features Explores polymeric material printing and design Provides information on the potential for the transformation and manufacturing, reuse and recycling of polymeric material Includes comparison of 3D printing and injection moulding Discusses CAD design and pertinent scaling-up process related to polymers Offers basic strategies for improvement and troubleshooting of 3D printing This book is aimed at professionals and graduate students in polymer and mechanical engineering and materials science and engineering.

Download or read book Additive Manufacturing of Polymer Based Composite Materials written by Fabienne Touchard and published by Elsevier. This book was released on 2024-06-28 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Polymer Composites: Materials, Processes, and Properties presents the latest developments in AM of polymer matrix composites and illustrates the large range of composite materials that can be obtained. Different technologies with their own specificities such as: fused filament fabrication, selective laser sintering, stereolithography, and direct-ink-writing. Composites with chopped or continuous reinforcement, with synthetic or natural fibers, with thermoplastic or thermoset resin are compared and described in detail. Their thermal, physical, electrical, and mechanical properties are discussed. The book is dedicated to professionals involved in engineering design and production, as well as industrial communities who want to gain in-depth knowledge in the field of 3D printed composites. Provides an overview of different methods for additive manufacturing of polymer-based matrix composites Covers long and short fiber-based composites and corresponding application examples Addresses the development and properties of a wide range of matrices (thermoplastics, thermosets), and fibers (natural and synthetic) in a user-specified orientation, continuous or random organization and hierarchical structures Presents sustainability and structural reliability of composite structures Displays a careful balance between materials science and technology, providing a detailed understanding of how composites’ properties, processing, performance, and structure are interrelated

Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo

Download or read book Quality Analysis of Additively Manufactured Metals written by Javad Kadkhodapour and published by Elsevier. This book was released on 2022-11-30 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Analysis of Additively Manufactured Metals: Simulation Approaches, Processes, and Microstructure Properties provides readers with a firm understanding of the failure and fatigue processes of additively manufactured metals. With a focus on computational methods, the book analyzes the process-microstructure-property relationship of these metals and how it affects their quality while also providing numerical, analytical, and experimental data for material design and investigation optimization. It outlines basic additive manufacturing processes for metals, strategies for modeling the microstructural features of metals and how these features differ based on the manufacturing process, and more.Improvement of additively manufactured metals through predictive simulation methods and microdamage and micro-failure in quasi-static and cyclic loading scenarios are covered, as are topology optimization methods and residual stress analysis techniques. The book concludes with a section featuring case studies looking at additively manufactured metals in automotive, biomedical and aerospace settings. Provides insights and outlines techniques for analyzing why additively manufactured metals fail and strategies for avoiding those failures Defines key terms and concepts related to the failure analysis, quality assurance and optimization processes of additively manufactured metals Includes simulation results, experimental data and case studies

Download or read book A Guide to Additive Manufacturing written by Damir Godec and published by Springer Nature. This book was released on 2022-09-12 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). It is written in an educative style to enable the reader to understand and apply the material. It begins with an introduction to AM technologies and the general workflow, as well as an overview of the current standards within AM. In the following chapter, a more in-depth description is given of design optimization and simulation for AM in polymers and metals, including practical guidelines for topology optimization and the use of lattice structures. Special attention is also given to the economics of AM and when the technology offers a benefit compared to conventional manufacturing processes. This is followed by a chapter with practical insights into how AM materials and processing parameters are developed for both material extrusion and powder bed fusion. The final chapter describes functionally graded AM in various materials and technologies. Throughout the book, a large number of industrial applications are described to exemplify the benefits of AM.

Download or read book Shape Memory Composites Based on Polymers and Metals for 4D Printing written by Muni Raj Maurya and published by Springer Nature. This book was released on 2022-05-18 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Composites Based on Polymers and Metals for 4D Printing is a thorough discussion of the physics and chemistry behind this developing area of materials science. It provides readers with a clear exposition of shape-memory-composite (SMC) preparation techniques for 3D and 4D printing processes and explains how intelligent manufacturing technology may be applied in fields such as robotics, construction, medical science, and smart sensors. The book covers fundamental background knowledge on the synthesis of shape memory polymers (SMPs) and shape memory alloys (SMAs), and additive manufacturing techniques. Polymers and metals and their roles in 4D printing are dealt with separately, and applications of 4D printing are treated in their own chapter. The different alloy compositions and nanoparticle fillers in polymer composites are examined in detail, along with the key mechanisms involved in their processing. Hybrid nanofillers and synergistic composite mixtures, which are either in extensive current use or have shown promising outcomes in the field of 4D printing, are thoroughly discussed. Differences between these novel SMCs and traditional metal alloys, organic and inorganic composites are presented, and means by which they can improve mechanical properties that are triggered by external sources like magnetic field, temperature, and pH of solvent, are set out. This book provides practitioners, industrial researchers, and scholars with a state-of-the-art overview of SMP/SMA synthesis, additive manufacturing, modification in synthesis of SMCs for 4D printing, and their likely future applications.

Download or read book Advances in Manufacturing and Processing of Materials written by Narendra Kumar and published by CRC Press. This book was released on 2024-08-23 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume examines important research on advancements in materials and manufacturing processes, focusing on characterization and applications and defining solutions to current issues as well as for inspiration for future innovation. It looks at areas including material characterization using modern technologies, process characterization, and more. The diverse selection of topics includes additive manufacturing for medical implants and medical image processing, characterization of composite materials using natural and synthetic fibers, 3D and 4D printing technologies and applications, biodegradable packaging materials, manufacturing and processing of materials for novel drug delivery systems, and more.

Download or read book Springer Handbook of Additive Manufacturing written by Eujin Pei and published by Springer Nature. This book was released on 2023-11-25 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is the ultimate definitive guide that covers key fundamentals and advanced applications for Additive Manufacturing. The Handbook has been structured into seven sections, comprising of a thorough Introduction to Additive Manufacturing; Design and Data; Processes; Materials; Post-processing, Testing and Inspection; Education and Training; and Applications and Case Study Examples. The general principles and functional relationships are described in each chapter and supplemented with industry use cases. The aim of this book is to help designers, engineers and manufacturers understand the state-of-the-art developments in the field of Additive Manufacturing. Although this book is primarily aimed at students and educators, it will appeal to researchers and industrial professionals working with technology users, machine or component manufacturers to help them make better decisions in the implementation of Additive Manufacturing and its applications.

Download or read book Carbon Nanomaterial Filled Polymer Composites for Functional Applications Processing Structure and Property Relationship written by Dong Xiang and published by Frontiers Media SA. This book was released on 2022-03-11 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing for Advance Applications written by Pawan Sharma and published by CRC Press. This book was released on 2024-06-26 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the latest trends such as 4D printing, wire arc additive manufacturing (WAAM), direct energy deposition, and topological optimization in additive manufacturing (AM), and its compliance with the ASTM/ISO standards. It further explains materials for additive manufacturing and the development of novel future materials. The focus of this book is to cover the fundamentals, principles, selection of material and equipment, and applications of additive manufacturing (AM) in a comprehensive manner. It will showcase information about the effective utilization of additive manufacturing for advanced applications in diverse areas such as biomedical, aerospace, automobile, defence, and reverse engineering. The other main features are- · Covers comprehensive discussion on the theoretical aspects of additive manufacturing such as sintering, diffusion, and photopolymerization. · Showcases applications of additive manufacturing in diverse fields including aerospace engineering, automotive engineering, biomedical engineering, and reverse engineering. · Presents case studies to showcase real-time problems and solutions using additive manufacturing. · Includes pedagogical features such as algorithms, exercises, and case studies. The text is primarily written for senior undergraduate, graduate students, and academic researchers in the fields of manufacturing engineering, industrial engineering, production engineering, mechanical engineering, and aerospace engineering.

Download or read book Handbook of Sustainable Polymers for Additive Manufacturing written by Antonio Paesano and published by CRC Press. This book was released on 2022-05-12 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest technical information on sustainable materials that are feedstocks for additive manufacturing (AM). Topics covered include an up-to-date and extensive overview of raw materials, their chemistry, and functional properties of their commercial versions; a description of the relevant AM processes, products, applications, advantages, and limitations; prices and market data; and a forecast of sustainable materials used in AM, their properties, and applications in the near future. Data included are relative to current commercial products and are presented in easy-to-read tables and charts. Features Highlights up-to-date information and data of actual commercial materials Offers a broad survey of state-of the-art information Forecasts future materials, applications, and areas of R&D Contains simple language, explains technical terms, and minimizes technical lingo Includes over 200 tables, nearly 200 figures, and more than 1,700 references to technical publications, mostly very recent Handbook of Sustainable Polymers for Additive Manufacturing appeals to a diverse audience of students and academic, technical, and business professionals in the fields of materials science and mechanical, chemical, and manufacturing engineering.

Download or read book Additive Manufacturing written by Manu Srivastava and published by CRC Press. This book was released on 2019-09-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a growing need for manufacturing optimization all over the world. The immense market of Additive Manufacturing (AM) technologies dictates a need for a book that will provide knowledge of the various aspects of AM for anyone interested in learning about this fast-growing topic. This book disseminates knowledge of AM amongst scholars at graduate level, post graduate level, doctoral level, as well as industry personnel. The objective is to offer a state-of-the-art book which covers all aspects of AM and incorporates all information regarding trends, historical developments, classifications, materials, tooling, software issues, dynamic design, principles, limitations, and communication interfaces in a one-stop resource. Features: Breaks down systematic coverage of various aspects of AM within four distinct sections Contains details of various AM techniques based on ASTM guidelines Discusses many AM applications with suitable illustrations Includes recent trends in the field of AM Covers engineering materials utilized as raw materials in AM Compares AM techniques with different traditional manufacturing methods